基于后动态聚焦振镜系统激光打点优化研究

导光板(LGP)作为液晶显示(LCD)技术的背光源，已得到了广泛的应用。导光板材料的反射面有大量反射点，目前照明用导光板多采用丝网印刷或激光雕刻制备这些反射点。丝网印刷的油墨反射点容易老化脱落，激光雕刻的优势在于更具个性化，生产灵活且环保等，是今后的发展趋势。传统激光雕刻方式效率低，且缺乏工艺优化。提出一套基于后动态聚焦振镜系统的激光打点方法及相应的工艺优化方法，该方法加工效果优异，加工效率显著提高。

Abstract

The light guide plate (LGP) as the backlight of the liquid crystal display (LCD), has been applied widely. The manufacturing principle arranging the reflection point on the surface of the the LGP material. Currently LGP for lighting is manufactured by screen printing and laser engraving. Laser engraving is more personalized, flexible and green, but the traditional laser engraving way, whose efficiency is too low, is lack of processing optimization. A methodology of laser dots marking that based on dynamic focus galvanometer system is proposed.The corresponding process optimization method is developed. It improves the effectiveness and efficiency of processing significantly.

参考文献

[1] 尹杰,邱云峰,刘桥, 等. 大尺寸LED超薄灯箱的导光板设计[J]. 激光与光电子学进展, 2010, 47(12): 120801.

Yin Jie, Qiu Yunfeng, Liu Qiao, et al.. Design of light guide plate for large-size LED slim light box[J]. Laser & Optoelectronics Progress, 2010, 47(12): 120801.

[2] 黄翀,姜言森,沈奕,等. 侧光式LED背光源的导光板网点设计[J]. 应用光学, 2008, 29(5): 689-692.

Huang Chong, Jian Yansen, Shen Yi, et al.. Design of scattering netted dots on light guide plate of edge-lighting LED backlight[J]. J Applied Optics, 2008, 29(5): 689-692.

[3] 吴桔生,何华,李宏彦, 等. 导光板散射点的初步设计[J]. 现代显示， 2007， 18(4): 36-39.

Wu Jiesheng, He Hua, Li Hongyan, et al.. A preliminary design of the scattering point of light guide plates [J]. Advanced Display, 2007, 18(4): 36-39.

[4] O Rtting, W Ropke, H Becker, et al.. Polymer microfabrication technologies[ J]. Microsyst Technol, 2002, 8(1): 32-36.

[5] A Costela, I Garciamoreno, F Floridoetal. Laser ablation of polymeric materials at 157 nm[ J]. J Appl Phys, 1995, 77(6): 2343-2350.

[6] 祁恒, 王贤松, 陈涛, 等. PMMA基连续流式PCR微流控芯片的CO2 激光直写加工与应用[J]. 中国激光, 2009, 36(5): 1239-1245.

Qi Heng, Wang Xiansong, Chen Tao, et al.. Fabrication and application of PMMA continuous flow PCR microfluidic chip with CO2 laser direct writing ablation micromachining technique[ J]. Chinese J Lasers, 2009, 36(5): 1239-1245.

[7] 申雪飞，陈涛. CO2激光直写PMMA微通道工艺改进的实验研究[J]. 中国激光, 2011, 38(6): 251-255.

Shen Xuefei, Chen Tao. Improvement of processing technique of CO2 laser direct writing on PMMA micro channels[J]. Chinese J Lasers, 2011, 38(6): 251-255.

[8] 李晓宇，陈继民，刘富荣, 等. CO2激光刻蚀PMMA制备微流道的研究[J]. 激光与光电子学进展, 2011, 48(4): 041401.

Li Xiaoyu, Cheng Jimin, Liu Furong, et al.. Micro-channel fabrication with CO2 laser ablation of polymethyl methacrylate[J]. Laser & Optoelectronics Progress, 2011, 48(4): 041401.

[9] Klank H, Kutter J P, Geschke O. CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems[J]. Lab on a Chip, 2002, 2(4): 242-246.

晏恒峰, 陈继民, 邵军. 基于后动态聚焦振镜系统激光打点优化研究[J]. 中国激光, 2013, 40(9): 0903006. Yan Hengfeng, Chen Jimin, Shao Jun. Study on Laser Dots Marking Based on Dynamic Focusing Galvanometer System[J]. Chinese Journal of Lasers, 2013, 40(9): 0903006.

基于后动态聚焦振镜系统激光打点优化研究

关于本站 Cookie 的使用提示

全站搜索

基于后动态聚焦振镜系统激光打点优化研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索