[1] 庞铭, 虞钢, 刘兆. K418 与42CrMo 异种金属的激光穿透焊接[J]. 中国激光, 2006, 33(8): 1122-1126.

    Pang Ming, Yu Gang, Liu Zhao, et al.. Dissimilar metal of K418 and 42CrMo full penetration laser welding[J]. Chinese J Lasers, 2006, 33(8): 1122-1126.

[2] 吴东江, 张天武, 马广义, 等. 连续激光焊接Fe-Ni 合金工艺参数对焊缝形貌影响[J]. 中国激光，2013, 40(3): 0303003.

    Wu Dongjiang, Zhang Tianwu, Ma Guangyi, et al.. Influence of welding parameters on themorphology of Fe-Ni alloy with continuous wave YAG laser[J]. Chinese J Lasers, 2013, 40(3): 0303003.

[3] 陈刚, 杨全毅, 周明哲, 等. M42/X32 异种金属CO2激光焊接接头组织和性能的研究[J]. 湖南大学学报, 2013, 40(11): 89-94.

    Chen Gang, Yang Quanyi, Zhou Mingzhe, et al.. Study of the microstructure and proper of M42/X32 dissimilar metal CO2 laser welding joints[J]. Journal of Hunan University (Natural Scinences), 2013, 40(11): 89-94.

[4] 周春阳, 吴世凯, 肖荣诗. 高温合金-不锈钢异种金属光纤激光焊接试验研究[J]. 应用激光, 2012, 32(2): 108-111.

    Zhou Chunyang, Wu Shikai, Xiao Rongshi. Experimental investigation on fiber laser welding stainless steel 304 to super alloy GH3128[J]. Applied Laser, 2012, 32(2): 108-111.

[5] 王家淳, 王希哲, 惠松骁. HE130 合金激光焊接线能量与焦点位置研究[J]. 中国激光, 2003, 30(2): 179-183.

    Wang Jiachun, Wang Xizhe, Hui Songxiao. Research of linear heat input and laser focus position for laser welding HE130 Titanium alloy[J]. Chinese J Lasers, 2003, 30(2): 179-183.

[6] Dowden J, Kapadia P. A mathematical investigation of the penetration depth in key hole welding with continuous CO2 lasers[J]. Journal of Physics D: Appl Phys, 1995, 28(11): 2252-2261.

[7] 李亚江, 李嘉宁. 激光焊接/切割/熔敷技术[M]. 北京: 化学工业出版社, 2012: 47-53.

[8] 高燕, 韩国明, 李建强. 不锈钢激光焊焊缝成形的数学模型[J]. 电焊机, 2005, 35(10): 46-49.

    Gao Yan, Han Guoming, Li Jianqiang. Numerical model of formation of laser seam for welding stainless steel[J]. Electric Welding Machine, 2005, 35(10): 46-49.

[9] 库尔兹, 费希尔. 凝固原理[M]. 北京: 高等教育出版社, 2010: 120-121.

    Kurz W, Fisher D J. Fundamentals of Solidification[M]. Li Jianguo, Hu Qiaodan Transl. Beijing: Higher Education Press, 2010: 120-121.