Model eyes with curved multilayer structure for the axial resolution evaluation of an ophthalmic optical coherence tomography device
[1] D. Huang et al., “Optical Coherence Tomography," Science (New York, N.Y.) 254(5035), 1178-1181 (1991).
[2] “ISO 16971-2015-04-15," (2015).
[3] Z. Hu et al., “A physical model eye with 3D resolution test targets for optical coherence tomography," Opt-Electron. Eng. 41(12), 28 32 and 38 (2014).doi:10.1117/12.2067974.
[4] A. Agrawal et al., “Three-dimensional characterization of optical coherence tomography point spread functions with a nanoparticle-embedded phantom," Opt. lett. 35(13), 2269 (2010). doi:10.1364/OL.35.002269.
[5] T. Wen et al., “A standard test method based on point spread function for three-dimensional imaging system," Proc. SPIE, pp. 96842F-96842F-9 (2016). doi:10.1117/12.2243260.
[6] A. Agrawal et al., “Characterizing the point spread function of retinal OCT devices with a model eyebased phantom," Biomed. Opt. Express 3(5), 1116(2012). doi:10.1364/BOE.3.001116.
[7] A. Agrawal et al., “Multilayer thin-film phantoms for axial contrast transfer function measurement in optical coherence tomography," Biomed. Opt. Express 4(7), 1166 (2013). doi:10.1364/BOE.4.001166.
[8] T. S. Rowe, R. J. Zawadzki, “New developments in eye models with retina tissue phantoms for ophthalmic optical coherence tomography," Proc. SPIE, 8229(1) (2012). doi:10.1117/12.905499.
[9] T. S. Rowe, R. J. Zawadzki, “Development of a corneal tissue phantom for anterior chamber optical coherence tomography (AC-OCT)," SPIE BiOS. International Society for Optics and Photonics, pp. 85830I 85830I-9, 148-156 (2013). doi:10.1117/12.2005744.
[10] J. Baxi et al., “Retina-simulating phantom for optical coherence tomography," J. Biomed. Opt. 19(2), 021106-021106 (2013). doi:10.1117/1.JBO.19.2.021106.
[11] R. Y. Gu et al., “Variable-sized bar targets for characterizing three-dimensional resolution in OCT," Biomed. Opt. Express 3(9), 2317 (2012). doi:10.1364/BOE.3.002317.
[12] A. Curatolo et al., “Structured three-dimensional optical phantom for optical coherence tomography," Opt. Exp. 19(20), 19480 (2011). doi:10.1364/OE.19.019480.
[13] P. H. Tomlins et al., “Femtosecond laser microinscription of optical coherence tomography resolution test artifacts," Biomed. Opt. Exp. 2(5), 1319(2011). doi:10.1364/BOE.2.001319.
[14] Z. Hu et al., “Test target for characterizing 3D resolution of optical coherence tomography," Proc. SPIE, pp. 92971S 92971S-7 (2014). doi:10.1117/12.2073062.
[15] G. Lamouche et al., “Review of tissue simulating phantoms with controllable optical, mechanical and structural properties for use in optical coherence tomography," Biomed. Opt. Express 3(6), 18 (2012).doi:10.1364/BOE.3.001381.
[16] D. M. de Bruin et al., “Optical phantoms of varying geometry based on thin building blocks with controlled optical properties," J. Biomed. Opt. 15(2), 025001-025001-025010 (2010). doi:10.1117/1.3369003.
[17] B. W. Pogue, M. S. Patterson, “Review of tissue simulating phantoms for optical spectroscopy, imaging and dosimetry," J. Biomed. Opt. 11(4), 041102-041102-041116 (2006). doi:10.1117/1.2335429.
[18] C. E. Bisaillon, M. L. Dufour, G. Lamouche, “Artery phantoms for intravascular optical coherence tomography: Healthy arteries," Biomed. Opt. Express 2(9), 2599 2613 (2011). doi:10.1364/BOE.2.002599.
[19] M. Hammer et al., “Optical properties of ocular fundus tissues determined by optical coherence tomography," Opt. commun. 186(1 3), 149 (2000). doi:10.1016/S0030-4018(00)01054-3.
Zhenggang Cao, Zengqian Ding, Zhixiong Hu, Wen Qiao, Wenli Liu, Xiaojun Chen. Model eyes with curved multilayer structure for the axial resolution evaluation of an ophthalmic optical coherence tomography device[J]. Journal of Innovative Optical Health Sciences, 2018, 11(3): 1850013.