[1] 陈林柱,王立君,韦成华,等. 复合材料激光辐照实验中的吸收特性研究[J]. 功能材料, 2010(10): 1709-1711.(Chen Linzhu, Wang Lijun, Wei Chenghua, et al. Research of absorption characteristics of the composites irradiated by laser. Journal of Functional Materials, 2010(10): 1709-1711)

[2] 王以忠. 激光对碳纤维增强环氧树脂基复合材料的辐照效应[D]. 长沙: 国防科学技术大学, 2007: 6-15.(Wang Yizhong. Effects of laser irradiation to carbon fiber reinforced epoxy resin composites. Changsha: Graduate School of National University of Defense Technology, 2007: 6-15)

[3] 张永强,王伟平,唐小松,等. 两种纤维增强复合材料与连续激光耦合规律[J]. 强激光与粒子束, 2007, 19(10): 1599-1602.(Zhang Yongqiang, Wang Weiping, Tang Xiaosong, et al. Coupling rules of two fiber reinforced composites with continuous wave laser. High Power Laser and Particle Beams, 2007, 19(10): 1599-1602)

[4] 李雅娣,吴平,马喜梅,等. 碳纤维/环氧树脂复合材料层板连续激光烧蚀试验研究[J]. 纤维复合材料, 2010(2): 21-24.(Li Yadi, Wu Ping, Ma Ximei, et al. The tests of carbon fiber/epoxy laminated composites under continuous laser irradiation. Fiber Composites, 2010(2): 21-24)

[5] 陈博,万红,穆景阳,等. 重频激光作用下碳纤维/环氧树脂复合材料热损伤规律[J]. 强激光与粒子束, 2008, 20(4): 547-552.(Chen Bo, Wan Hong, Mu Jingyang, et al. Ablative mechanism of carbon-fiber/epoxy composite irradiated by repetition frequency laser. High Power Laser and Particle Beams, 2008, 20(4): 547-552)

[6] 郭亚林,梁国正,丘哲明,等. 激光参数对碳纤维复合材料质量烧蚀率的影响[J]. 复合材料学报, 2006, 23(5): 84-88.(Guo Yalin, Liang Guozheng, Qiu Zheming, et al. Effect of laser parameters on mass ablative rate of carbon fiber reinforced composite. Acta Materiae Compositae Sinica, 2006, 23(5): 84-88)

[7] 熊刚,姚强,宋蔷,等. 挥发分喷射对碳烟生成和火焰辐射的影响[J]. 燃烧科学与技术, 2012, 18(2): 104-110.(Xiong Gang, Yao Qiang, Song Qiang, et al. Effects of ejection on soot formation and flame radiation. Journal of Combustion Science and Technology, 2012, 18(2): 104-110)

[8] Johnsson J. Laser-induced incandescence for soot diagnostics-theoretical investigation and experimental development[D]. Lund: LUND University, 2012: 17-27.

[9] Frederickson K, Kearney S P, Grasser T W. Laser-induced incandescence measurements of soot in turbulent pool fires[J]. Applied Optics, 2011, 50(4): A49-A59.

[10] Witkowski D, Kondo K, Vishwanathan G, et al. Evaluation of the sooting properties of real fuels and their commonly used surrogates in a laminar co-flow diffusion flame[J]. Combustion and Flame, 2013, 160(6): 1129-1141.

[11] Schulz C, Kock B F, Hofmann M, et al. Laser-induced incandescence: Recent trends and current questions[J]. Applied Physics B, 2006, 83(3): 333-354.

[12] Melton L A. Soot diagnostics based on laser heating[J]. Applied Optics, 1984, 23(13): 2201-2208.

[13] Narayanaswamy V, Clemens N T. Simultaneous LII and PIV measurements in the soot formation region of turbulent non-premixed jet flames[J]. Proceedings of the Combustion Institute, 2013, 34(1): 1455-1463.

[14] López-Yglesias X, Schrader P E, Michelsen H A. Soot maturity and absorption cross sections[J]. Journal of Aerosol Science, 2014, 75: 43-64.

[15] Bejaoui S, Lemaire R, Desgroux P, et al. Experimental study of the E(m,λ)/E(m,1064) ratio as a function of wavelength, fuel type, height above the burner and temperature[J]. Applied Physics B: Lasers and Optics, 2014, 116(2): 313-323.

[16] Hayashi J, Hashimoto N, Nakatsuka N, et al. Soot formation characteristics in a lab-scale turbulent pulverized coal flame with simultaneous planar measurements of laser induced incandescence of soot and Mie scattering of pulverized coal[J]. Proc of the Combustion Institute, 2013, 34(2): 2435-2443.

[17] 王宇. 电场作用下火焰中碳烟颗粒的分布与聚积规律[D]. 北京: 清华大学, 2009: 35-36.(Wang Yu. Electric field control of soot distribution and accumulation in the flame. Beijing: Tsinghua University, 2009: 35-36)

[18] Smallwood G J, Clavel D, Gareau D. Concurrent quantitative laser induced incandescence and SMPS measurements of EGR effects on particulate emissions from a TDI diesel engine[R]. SAE Technical Paper, 2002: 2715-2726.