[1] 刘正, 王中光, 王越 等．压铸镁合金在汽车工业中的应用和发展趋势[J]. 特种铸造及有色合金, 1999, (5): 55～58

    Liu Zheng, Wang Zhongguang, Wang Yue et al.. Application and developing tendency of magnesium die casting alloys in automobile industry[J]. Special Casting and Nonferrous Alloys. 1999, (5): 55～58

[2] 潘宪曾. 镁合金在中国压铸工业中的应用世界镁合金压铸与中国[J]. 铸造, 2001, 50(6): 303～309

    Pan Xianzeng. Application of magnesium alloy in die casting industry of china-global die casting of magnesium alloy and China[J]. Foundry, 2001, 50(6): 303～309

[3] J. E. Gray, B. Luan. Protective coatings on magnesium and its alloys-a critical review[J]. J. Alloys and Compounds, 2002, 336(1-2): 88～113

[4] D. Dube, M. Fiset, A. Couture et al.. Characterization and performance of laser melted AZ91D and AM60B[J]. Mater. Sci. Eng. A, 2001, 299(1-2): 38～45

[5] S. Ignat, P. Sallamand, D. Grevey et al.. Magnesium alloys laser (NdYAG) cladding and alloying with side injection of aluminium powder[J]. Appl. Surface Science, 2004, 225(1-4): 124～134

[6] Zhang Yongkang, Zhang Lei, Luo Kaiyu et al.. Effects of laser shock processing on mechanical properties of laser welded ANSI 304 stainless steel joint[J]. Chinese J. Mechanical Engineering, 2012, 25(2): 285～292

[7] Omar Hatamleh, Jed Lyons, Royce Forman. Laser and shot peening effects on fatigue crack growth in friction stir welded 7075～T7351 aluminum alloy joints[J]. International J. Fatigue, 2007, 29(3): 421～434

[8] 周建忠, 王呈栋, 黄舒 等. 6061-T6铝合金紧凑拉伸试样激光喷丸强化后的疲劳裂纹扩展性能研究[J]. 中国激光, 2011, 38(7): 0703009

    Zhou Jianzhong, Wang Chengdong, Huang Shu et al.. Study on fatigue crack growth performance of 6061-T6 aluminum alloy after laser shot peening[J]. Chinese J. Lasers, 2011, 38(7): 0703009

[9] 冯爱新, 周鹏程, 聂贵锋 等. 热处理和激光冲击对2Cr13马氏体不锈钢冲击韧性的影响[J]. 中国激光, 2012, 39(8): 0803002

    Feng Aixin, Zhou Pengcheng, Nie Guifeng et al.. Influence of heat treatment and laser shock processing on impact toughness of 2Cr13 martensite stainless steel[J]. Chinese J. Lasers, 2012, 39(8): 0803002

[10] 张凌峰, 熊毅, 张毅 等. 高锰钢在激光冲击作用下的微观特征[J]. 中国激光, 2011, 38(6): 0603025

    Zhang Lingfeng, Xiong Yi, Zhang Yi et al.. Microstructure of high manganese steel by laser shock processing[J]. Chinese J. Lasers, 2011, 38(6): 0603025

[11] Yongkang Zhang, Jian You, Jinzhong Lu et al.. Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy[J]. Surface & Coatings Technology, 2010, 204(24): 3947～3953

[12] 余刚, 刘跃龙, 李瑛 等. Mg合金的腐蚀与防护[J]. 中国有色金属学报, 2002, 12(6): 1087～1098

    Yu Gang, Liu Yuelong, Li Ying et al.. Corrosion and protective of magnesium alloys[J]. The Chinese J. Nonferrous Metals, 2002, 12(6): 1087～1098

[13] 肖纪美, 曹楚南. 材料腐蚀学原理[M]. 北京: 北京化学工业出版社, 2002

    Xiao Jimei, Cao Chunan. The Principle of Material Corrosion[M]. Beijing: Chemical Industry Press, 2002

[14] 宋光铃. 镁合金的腐蚀与防护[M]. 北京: 化学工业出版社, 2006

    Song Guangling. Corrosion and Protection to Magnesium Alloys[M]. Beijing: Chemical Industry Press, 2006

[15] 曹楚南, 张鉴清. 电化学阻抗谱导论[M]. 北京: 科学出版社, 2002

    Cao Chunan, Zhang Jianqing. An Introduction to Electrochemical Impedance Spectroscopy[M]. Beijing: Science Press, 2002

[16] K. J. Vetter. Electrochemical Kinetics[M]. Salt Lake City: Academic Press, 1967: 759～760