红外, 2014, 35 (7): 33, 网络出版: 2014-07-22
基于方位角调制的LED道路照明灯具的配光设计研究
Optical Distribution Design of LED Road Luminaire Based on Azimuth Modulation
摘要
提出了一种基于方位角调制的LED道路照明灯具的配光设计方法。选择型号为OSLON SX的大功率LED作为光源,利用16颗LED建立了4×4阵列LED灯具的光学模型。通过改变每一排LED的方位角控制了接收面上的光照度分布。研究表明,当LED阵列上下部分分别倾斜±30°时,接收面的光照度最均匀。
Abstract
An optical distribution design method based on azimuth modulation is put forward. Model OSLON SX high power Light Emitted Diodes (LED) are chosen as a light source. An optical model of a 4×4 LED array is built with 16 LEDs. The illumination distribution on the receiving surface is controlled by changing the azimuth of each row of LEDs. The research result show that the illumination distribution on the receiving surface is most uniform when the upper and lower portions of the LED array tilt at an angle of ±30° respectively.
参考文献
[1] 乐阳,孙艳,陈鑫,等.基于II-VI族半导体量子点的白光LED的研究进展[J].红外,2010, 31(2):8-12.
[2] 林朋飞,倪争技,黄元申,等.大功率LED阵列光源的配光设计[J].光学仪器,2012, 34(3):60-65.
[3] 卓金寨,王敏,庄振锋.小角度LED高效配光镜组及阵列设计[J].激光与光电子学进展,2010, 47(11):113-118.
[4] 王洪,张小凡,杜乃锋,等.面向大功率LED集成光源的反射器设计方法[J].红外与激光工程,2011, 40(7):1282-1286.
[5] 黄明波,郭震宁,黄智炜,等.基于一种圆形LED面光源的网点设计及仿真[J].应用光学,2010, 31(5):701-704.
[6] 王乐.LED应用于照明的计算和仿真[J].应用光学,2007, 18(1):25-30.
运高谦, 贾永, 杨红军, 张晓冬, 杨坤. 基于方位角调制的LED道路照明灯具的配光设计研究[J]. 红外, 2014, 35(7): 33. YUN Gao-qian, JIA Yong, YANG Hong-jun, ZHANG Xiao-dong, YANG Kun. Optical Distribution Design of LED Road Luminaire Based on Azimuth Modulation[J]. INFRARED, 2014, 35(7): 33.