[1] Shepeleva L, Medres B, Kaplan W D, et al.. Laser cladding of turbine blades［J］. Surf Coat Technol, 2000, 125(1): 45-48.

[2] 徐向阳, 陈光南, 刘文今. 先进的激光直接制造技术与现代航空装备维修［J］. 航空维修与工程, 2004,3: 28-30.

    Xu Xiangyang, Chen Guangnan, Liu wenjin. Advanced direct laser fabrication technology and modern aeronautic equipment repair［J］. Aviation Maintenance & Engineering, 2004, 3: 28-30.

[3] Flanagan A, O′connor T. Medical device coating by laser cladding: US, 8221822 ［P］.2012-7-17.

[4] Baldridge T, Poling G, Foroozmehr E, et al.. Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications［J］. Opt Laser Eng, 2013, 51(2): 180-184.

[5] 王华明. 金属材料激光表面改性与高性能金属零件激光快速成形技术研究进展［J］. 航空学报, 2002, 23(5): 473-478.

    Wang Huaming. Research progress on laser surface modifications of metallic materials and laser rapid forming of high performance metallic components［J］. Acta Aeronautica Et Astronautica Sinica, 2002, 23(5): 473-478.

[6] 王新林, 漆海滨, 石世宏. 激光熔覆石化阀门密封面熔覆层裂纹控制的研究［J］. 激光技术, 2002, 26(5): 359-363.

    Wang Xinlin, Qi Haibin, Shi Shihong. Study on crack control of layer during laser cladding sealing surface of petrochemical valves［J］. Laser Technology, 2002, 26(5): 359-363.

[7] Alam M M, Kaplan A F H, Tuominen J, et al.. Analysis of the stress raising action of flaws in laser clad deposits［J］. Mater Des, 2013, 46: 328-337.

[8] Tobar M J, Alvarez C, Amado J M, et al.. Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel［J］. Surf Coat Technol, 2006, 200(22): 6313-6317.

[9] 王宏宇, 左敦稳, 陆英艳, 等. 镍基合金激光熔覆MCrAlY涂层基体裂纹的成因与控制 ［J］. 航空材料学报, 2008, 28(6): 57-60.

    Wang Hongyu, Zuo Dunwen, Lu Yingyan, et al.. Crack causes and control of MCrAlY coating of Ni-base alloy laser cladding［J］. Journal of Aeronautical Materials, 2008, 28(6): 57-60.

[10] 刘洪喜, 纪升伟, 蒋业华, 等. 旋转磁场辅助激光熔覆Fe60复合涂层的显微组织与性能［J］. 中国激光, 2013, 40(1): 0103007.

    Liu Hongxi, Ji Shengwei, Jiang Yehua. Microstructure and property of Fe60 composite coatings by rotating magnetic field auxiliary laser cladding［J］. Chinese J Lasers, 2013, 40(1): 0103007.

[11] 许华, 郑启光, 丁周华, 等. 电磁搅拌辅助激光熔覆硬质合金的研究［J］. 激光技术, 2005, 29(5): 449-451.

    Xu Hua, Zheng Qiguang, Ding Zhouhua, et al.. Study on laser cladding hard alloy with electro magneticstirring［J］. Laser Technology, 2005, 29(5): 449-451.

[12] Bachmann M, Avilov V, Gumenyuk A, et al.. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts［J］. Int J Heat Mass Transfer, 2013, 60: 309-321.

[13] Gatzen M, Tang Z. CFD-based model for melt flow in laser beam welding of aluminium with coaxial magnetic field［J］. Phys Pro, 2010, 5: 317-326.

[14] Gatzen M, Tang Z, Vollertsen F, et al.. X-ray investigation of melt flow behavior under magnetic stirring regime in laser beam welding of aluminum［J］. J Laser App, 2011, 23(3): 032002.

[15] Velde O, Gritzki R, Grundmann R. Numerical investigations of Lorentz force influenced Marangoni convection relevant to aluminum surface alloying［J］. Int J Heat Mass Transfer, 2001, 44(14): 2751-2762.

[16] Cheung N, Larosa M A, Osório W R R, et al.. Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples［J］. Mater Sci, 2010, 636: 1119-1124.

[17] Lu Y, Beckermann C, Ramirez J C. Three-dimensional phase-field simulations of the effect of convection on free dendritic growth［J］. J Cryst Growth, 2005, 280(1): 320-334.

[18] Asta M, Beckermann C, Karma A, et al.. Solidification microstructures and solid-state parallels: Recent developments, future directions［J］. Acta Mater, 2009, 57(4): 941-971.

[19] Li D, Li R, Zhang P. A cellular automaton technique for modelling of a binary dendritic growth with convection［J］. Appl Meth Model, 2007, 31(6): 971-982.