[1] Hidehiro K, Masataka N. Experimental and numerical study of stitching interferometry for the optical testing of the SPICA telescope [J]. Space Telescopes and Instrumentation, Proc. of SPIE, 2012, 8442: 84423T-1.

[2] Jeff K, Mark B, Jay C, et al. Improved cryogenic testing capability at marshall space flight center’s X-ray cryogenic facility [J]. Space Telescopes and Instrumentation, Proc. of SPIE, 2006, 6265: 62654E.

[3] 朱硕, 张晓辉. 高精度瑞奇－康芒检测法研究及测试距离精度影响分析[J].光学学报, 2014, 34(1): 0112001-1～0112001-8.

    Zhu Shuo, Zhang Xiaohui. Study on high precision Ritchey-Common test and analysis of test distance influence [J]. Acta Optica Sinica, 2014, 34(1): 0112001-1～0112001-8.

[4] 侯溪, 伍凡, 杨力, 等.子孔径拼接干涉测试技术现状及发展趋势[J]. 光学与光电技术, 2005, 3(3): 50-53.

    Hou Xi, Wu Fan, Yang Li, et al. Status and development trend of sub-aperture stitching interferometric testing technique [J]. Optical & Optoelectronic Technology, 2005, 3(3): 50-53.

[5] Su Peng, Burge J H. Parks robert E application of maximum likelihood reconstruction of subaperture data for measurement of large flat mirrors[J]. Applied Optics, 2010, 49(1): 21-31.

[6] Tony L W, Thomas R S. Optimizing the cryogenic test configuration for the James webb space telescope [J]. SPIE, 2006, 6271: 62710B.

[7] Chen Shanyong, Li Shengyi, Wang Guilin. Subaperture test of wavefront error of large telescopes: Error sources and stitching performance simulations [J]. Intl. Symposium on Optoelectronic Technology and Application, Proc. of SPIE, 2014, 9298: 929817-1.

[8] Steven C W, Samuel H B, James H B, et al. Wavefront control of the large optics test and integration site (LOTIS) 6: 5 m collimator [J]. Applied Optics, 2010, 49(18): 3522-3537.

[9] 马冬梅, 韩昌元. 基于五棱镜扫描技术测试大口径平面镜的系统设计[J].电子测量技术, 2007, 30(11): 90-95.

    Ma Dongmei, Han Changyuan. System design of large flat mirror measurement based on pentagon prism scanning technique [J]. Electronic Measurement Technology, 2007, 30(11): 90-95.

[10] 程子清, 耿安兵, 杨长城. 轮廓仪检测的系统误差分析[J]. 光学与光电技术, 2005, 3(2): 41-44.

    Cheng Ziqing, Geng Anbing, Yang Changcheng. Analysis on system error of profilometer testing[J]. Optical & Optoelectronic Technology, 2005, 3(2): 41-44.

[11] 常山, 曹益平, 陈永权. 五棱镜的运动误差对波前测量的影响[J]. 光学仪器, 2005, 27(3): 12-16.

    Chang Shan, Cao Yiping, Chen Yongquan. Kinematic error effect of pentagonal prism on wavefront measurement [J]. Optical Instruments, 2005, 27(3): 12-16.

[12] 马冬梅, 孙军月, 张波, 等. 高精度大口径平面镜面形角差法测试探究[J]. 光学精密工程, 2005, 13(11): 121-126.

    Ma Dongmei, Sun Junyue, Zhang Bo, et al. High precision large flat mirror measurement by angle difference testing [J]. Optics and Precision Engineering, 2005, 13(11): 121-126.

[13] 马冬梅, 刘志祥, 马磊, 等. 五角棱镜扫描系统中调整误差及制造角差的影响分析[J]. 光学精密工程, 2008, 16(12): 2517-2523.

    Ma Dongmei, Liu Zhixiang, Ma Lei, et al. Influences of alignment error in pentaprism scanning system and fabrication angle error on measuring accuracy of optical surface [J]. Optics and Precision Engineering, 2008, 16(12): 2517-2523.