[1] 唐永健，张林，吴卫东，等.ICF靶材料和靶制备技术研究进展［J］.强激光与粒子束, 2008, 20(11):1773-1786.

    Tang Yongjian, Zhang Lin, Wu Weidong, et al. Research progress on ICF target materials and target fabrication technology. High Power Laser and Particle Beams, 2008, 20(11):1773-1786

[2] 张林，崔保顺，周兰，等.微封装法制备空心塑料微球［J］.强激光与粒子束, 1995， 7(1):151-156.

    Zhang Lin, Cui Baoshun, Zhou Lan, et al. The fabrication of hollow plastic spheres by microencapsulation method. High Power Laser and Particle Beams, 1995, 7(1):151-156

[3] Takagi M, Norimatsu T, Yamanaka T, et al. Development of deuterated polystyrene shells for laser fusion by means of a density-matched emulsion method［J］. Journal of Vacuum Science and Technology, 1991, 9(4):2145-2149.

[4] Liu Meifang, Chen Sufen, Qi Xiaobo, et al. Improvement of wall thickness uniformity of thick-walled polystyrene shells by density matching［J］. Chemical Engineering Journal, 2014, 241:466-476.

[5] 张林，唐永健，高党忠，等.聚合物空心微球密度匹配法制备工艺研究［J］.原子能科学技术， 2001， 35(5):427-431.

    Zhang Lin, Tang Yongjian, Gao Dangzhong, et al. Studies on the density-matched technique for fabrication of polymer hollow microspheres. Atomic Energy Science and Technology, 2001, 35(5):427-431

[6] 陈素芬，苏琳，刘一杨，等.聚-α-甲基苯乙烯微球固化过程中的密度匹配［J］.强激光与粒子束， 2012， 24(7):1561-1565.

    Chen Sufen, Su Lin, Liu Yiyang, et al. Density match during fabrication process of poly (α-methyl styrene)mandrels by microencapsulation. High Power Laser and Particle Beams, 2012, 24(7):1561-1565

[7] 陈素芬，刘一杨，苏琳，等.双重乳液固化速率对PAMS微球球形度的影响［J］.化工学报， 2013， 64(7):2447-2452.

    Chen Sufen, Liu Yiyang, Su Lin, et al. Influence of double emulsions solidification rate on sphericity of poly (α-methyl styrene) capsules in microencapsulation process. CIESC Journal, 2013, 64(7):2447-2452

[8] 刘梅芳，陈素芬，刘一杨，等.厚壁空心微球的球形度和壁厚均匀性的表征研究［J］.强激光与粒子束，2014,26:022017.

    Liu Meifang, Chen Sufen, Liu Yiyang, et al. Characterization of sphericity and wall thickness uniformity of thick-walled hollow microspheres. High Power Laser and Particle Beams, 2014, 26:022017

[9] Takagi M, Cook R, Stephens R, et al. Stiffening of PAMS mandrels during curing［J］. Fusion Technology, 2000, 38(7):50-53.

[10] 沈钟，赵振国，王果庭.胶体与表面化学［M］.北京：化学工业出版社， 2004:197-198.

    Shen Zhong, Zhao Zhenguo, Wang Guoting. Colloid and surface chemistry. Beijing: Chemical Industry Press, 2004:197-198

[11] Kumar S, Ganvir V, Sayanand C, et al. Alternative mechanisms of drop breakup in stirred vessels［J］. Chemical Engineering Science, 1998, 53(18):3269-3280.

[12] Qu Xiaofeng, Wang Yechun. Dinamics of concentric and eccentric compound droplets suspended in extensional flows［J］. Physics of Fluids, 2012, 24:1-22.