[1] H. C. Lefevre. 光纤陀螺仪［M］. 张桂才等译. 北京: 国防工业出版社, 2002

    H. C. Lefevre. The Fiber-Optic Gyroscope［M］. Zhang Guicai et al.. Transl. Beijing: National Defense Industry Press, 2002

[2] 张旭琳, 马慧莲, 何时进 等. 谐振式光纤陀螺的研究进展［J］. 光通讯研究, 2003, (2): 58～62

    Zhang Xulin, Ma Huilian, He Shijin et al..Recent progress on resonator fiber optic gyro［J］. Study on Opt. Commun., 2003, (2): 58～62

[3] G. McRobbie, I. Andonovic, B.Culshaw. Effect on gyro drift with an in-loop polarizer in an optical passive ring resonator［C］. SPIE, 1991, 1585: 136～152

[4] K. Takiguchi, K. Hotate. Bias of an optical passive ring-resonator gyro caused by the misalignment of the polarization axis in the polarization-maintaining fiber resonator［J］. J. Lightwave Technol., 1992, 10(4): 514～522

[5] K. Takiguchi, K. Hotate. Reduction of a polarization-fluctuation-induced error in an optical passive ring-resonator gyro by using a single-polarization optical fiber［J］. J. Lightwave Technol., 1993, 11(10): 1687～1693

[6] L. K. Strandjord, G. A. Sanders. Passive stabilization of temperature dependent polarization errors of a polarization-rotating resonator fiber optic gyroscope［C］. SPIE, 1995, 2510: 81～91

[7] L. K. Strandjord, G. A. Sanders. Resonator fiber optic gyro employing a polarization-rotating resonator［C］. SPIE, 1991, 1585: 163～172

[8] K. Hotate, T. Kurakake. Manner to reduce the drift due to polarization fluctuation in a resonator fiber optic gyro composed of a single mode fiber［C］. SPIE, 1993, 2070: 234～245

[9] C. X. Shi, K. Hotate. Bias of a resonator fiber optic gyro composed of a polarization-maintaining fiber ring resonator with the photoinduced birefringent grating［J］. J. Lightwave Technol., 1995, 13(9): 1853～1857

[10] 汤全安, 马新宇. 保偏光纤环形谐振腔研究［J］. 激光技术, 1998, 22(5): 265～267

    Tang Quanan, Ma Xinyu. Study of polarization maintaining fiber fing resonator［J］. Laser Technology, 1998, 22(5): 265～267

[11] 李佳程, 张炎华. 被动式谐振腔光纤陀螺的偏振分析［J］. 上海交通大学学报, 1999, 33(10): 1307～1309

    Li Jiachen, Zhang Yanhua. Polarization fluctuation analyese in passive ring resonator fiber optical gyro［J］. Journal of Shanghai Jiaotong University, 1999, 33(10): 1307～1309

[12] 唐峰. 白光干涉法保偏光纤偏振耦合测试及其应用［D］. 天津: 天津大学, 2005

    Tang Feng. Testing and Application of Polarization Coupling in Polarization Maintaining Fiber Using White Light Interferometry［D］. Tianjin: Tianjin University, 2005

[13] 张红霞, 张以谟, 贾大功 等. 白光扫描干涉仪用于保偏光纤偏振耦合检测［J］. 红外与激光工程, 2007, 36(3): 305～308

    Zhang Hongxia, Zhang Yimo, Jia Dagong et al.. White light scanning interferometer used for inspecting position of polarization coupling in polarization maintaining fiber［J］. Infrared and Laser Engineering, 2007, 36(3): 305～308

[14] Xu Tianhua, Tang Feng, Jing Wencai et al.. Influence of polarization extinction ratio on distributed polarization coupling detection［J］. Optoelectron. Lett., 2008, 4(4): 292～294

[15] 周晓军, 龚俊杰, 刘永智 等. 白光干涉偏振模耦合分布式光纤传感器分析［Ｊ］. 光学学报, 2004, 24(5): 605～608

    Zhou Xiaojun, Gong Junjie, Liu Yongzhi et al.. Analysis of white-light interference distributed optic fiber sensor by polarized modes coupling［J］. Acta Optica Sinica, 2004,24(5): 605～608

[16] 袁实, 李海峰. FPGA在偏振耦合测试仪中的应用［J］. 仪表技术与传感器, 2004, (11): 17～19

    Yuan Shi, Li Haifeng. Application of FPGA in polarization coupling analyzer［J］. Instrument Technique and Sensor, 2004, (11): 17～19

[17] 张红霞, 刘海涛, 井文才 等. 保偏光纤偏振耦合应力传感器的研究［J］. 光电子·激光, 2008, 19(11): 1442～1445

    Zhang Hongxia, Liu Haitao, Jing Wencai et al.. Research of stress sensing based on measurement of polarization coupling in polarization maintaining fiber［J］. Journal of Optoelectronics·Laser, 2008, 19(11): 1442～1445

[18] 姚建永, 张森, 王臻 等. 光纤Michelson干涉仪系统的研究［J］. 光通讯研究, 2007, (2): 45～48

    Yao Jianyong, Zhang Sen, Wang Zhen et al.. Investigation of fiber-optic Michelson interferometer system［J］. Study on Opt. Commun., 2007, (2): 45～48

[19] 李秋柱, 刘毅, 牛康康 等. 基于白光干涉测量技术的微器件三维形貌重构［J］. 测试技术学报, 2009, 23(3): 201～204

    Li Qiuzhu, Liu Yi, Niu Kangkang et al.. Reconstruction of the 3D surface profile of micro device based on white-light interference measurement technology［J］. Journal of Test and Measurement Technology, 2009, 23(3): 201～204