[1] Rajaram N, Sheikh-Ahmad J, Cheraghi S H. CO2 laser cut quality of 4130 steel[J]. International Journal of Machine Tools and Manufacture, 2003, 43(4): 351-358.

[2] Riveiro A, Quintero F, Lusquiños F, et al. The role of the assist gas nature in laser cutting of aluminum alloys[J]. Physics Procedia, 2011, 12: 548-554.

[3] . 155-[J]. Yilbas B S. Laser cutting quality assessment, thermal efficiency analysis. Journal of Materials Processing Technology, 2004, 156: 2106-2115.

[4] Salem H G, Mansour M S, Badr Y, et al. CW Nd∶YAG laser cutting of ultra low carbon steel thin sheets using O2 assist gas[J]. Journal of Materials Processing Technology, 2008, 196(1/2/3): 64-72.

[5] Arif A F M, Yilbas B S. Thermal stress developed during the laser cutting process: consideration of different materials[J]. The International Journal of Advanced Manufacturing Technology, 2008, 37(7/8): 698-704.

[6] Stournaras A, Stavropoulos P, Salonitis K, et al. An investigation of quality in CO2 laser cutting of aluminum[J]. CIRP Journal of Manufacturing Science and Technology, 2009, 2(1): 61-69.

[7] Riveiro A, Quintero F, Lusquiños F, et al. Parametric investigation of CO2 laser cutting of 2024-T3 alloy[J]. Journal of Materials Processing Technology, 2010, 210(9): 1138-1152.

[8] 葛亚琼, 王文先, 崔泽琴, 等. 铝合金脉冲固体Nd∶YAG激光切割及其对比试验[J]. 焊接技术, 2008, 37(5): 20-24.

    Ge Y Q, Wang W X, Cui Z Q, et al. Corresponding experimentation research of aluminium alloy cutting using pulsed solid Nd∶YAG laser[J]. Welding Technology, 2008, 37(5): 20-24.

[9] 葛亚琼, 王文先, 崔泽琴, 等. 辅助气体对5A06铝合金Nd∶YAG激光切割质量的影响[J]. 应用激光, 2008, 28(5): 358-361, 394.

    Ge Y Q, Wang W X, Cui Z Q, et al. Influence of assistant gas during Nd∶YAG laser cutting of 5A06 aluminium alloy[J]. Applied Laser, 2008, 28(5): 358-361, 394.

[10] Dubey A K, Yadava V. Optimization of kerf quality during pulsed laser cutting of aluminium alloy sheet[J]. Journal of Materials Processing Technology, 2008, 204(1/2/3): 412-418.

[11] Scintilla L D, Tricarico L, Wetzig A, et al. Investigation on disk and CO2 laser beam fusion cutting differences based on power balance equation[J]. International Journal of Machine Tools and Manufacture, 2013, 69: 30-37.

[12] Wandera C, Salminen A, Kujanpaa V. Inert gas cutting of thick-section stainless steel and medium-section aluminum using a high power fiber laser[J]. Journal of Laser Applications, 2009, 21(3): 154-161.

[13] Riveiro A, Quintero F, Lusquiños F, et al. Laser cutting of 2024-T3 aeronautic aluminum alloy[J]. Journal of Laser Applications, 2008, 20(4): 230-235.

[14] 陈聪, 高明, 顾云泽, 等. 光纤激光切割铝合金薄板工艺特性研究[J]. 中国激光, 2014, 41(6): 0603004.

    Chen C, Gao M, Gu Y Z, et al. Study on fiber laser cutting of aluminum alloy sheet[J]. Chinese Journal of Lasers, 2014, 41(6): 0603004.

[15] Amara EH, KheloufiK, TamsaoutT. 2D modeling of surface tension effect during laser metal cutting[C]∥32nd International Congress on Applications of Lasers & Electro-Optics, October 6-10, 2013, Miami, FL, USA.2013: 99- 103.

[16] Duan J, Man H C, Yue T M. Modelling the laser fusion cutting process: II. Distribution of supersonic gas flow field inside the cut kerf[J]. Journal of Physics D: Applied Physics, 2001, 34(14): 2135-2142.

[17] Wee L M, Li L. An analytical model for striation formation in laser cutting[J]. Applied Surface Science, 2005, 247: 277-284.