[1] P J Wegner, M A Henesian, D R Speck, et al.. Harmonic conversion of large-aperture 1.05-μm laser beams for inertial-confinement fusion research［J］. Appl Opt, 1992, 31(30): 6414-6426.

[2] 林尊琪. 激光核聚变的发展[J]. 中国激光, 2010, 37(9): 2202-2207.

    Lin Zunqi. Progress of laser fusion［J］. Chinese J Lasers, 2010, 37(9): 2202-2207.

[3] 王文义, 赵润昌,粟敬钦, 等. 神光Ⅲ原型装置初步的激光脉冲整形实验[J]. 光学学报, 2010, 30(4): 1051-1054.

    Wang Wenyi, Zhao Runchang, Su Jingqin, et al.. Preliminary laser-pulse-shaping experiment on technical integration line［J］. Acta Optica Sinica, 2010, 30(4): 1051-1054.

[4] C A Haynam, P J Wegner, J M Auerbach, et al.. National Ignition Facility laser performance status［J］. Appl Opt, 2007, 46(16): 3276-3303.

[5] H M George, I M Edward, R W Craig. The National Ignition Facility［J］. Opt Eng, 2004, 43(12): 2841-2843.

[6] E I Moses, R E Bonanno, C A Haynam, et al.. The National Ignition Facility: path to ignition in the laboratory［J］. Eur Phys J D, 2007, 44(2): 215-218.

[7] M L Spaeth, K R Manes, C C Widmayer, et al.. National Ignition Facility wavefront requirements and optical architecture［J］. Opt Eng, 2004, 43(12): 2854-2857.

[8] 代万俊, 张崑,张鑫, 等. 神光-Ⅲ原型装置全光路系统波前测量方法[J]. 中国激光, 2011, 38(2): 0202007.

    Dai Wanjun, Zhang Kun, Zhang Xin, et al.. Entire beam wavefront measurement in prototype of SG-Ⅲ facility［J］. Chinese J Lasers, 2011, 38(2): 0202007.

[9] J M Auerbach, C E Barker, S A Couture, et al.. Modeling of frequency doubling and tripling with converter refractive index spatial non-uniformities due to gravitational sag［C］. SPIE, 1999, 3492: 472-474.

[10] L Olivier, G Claude. Modeling of the effects of KDP crystals gravity sag on third harmonic generation［C］. SPIE, 1999, 3492: 802-808.

[11] 贾凯, 袁晓东, 徐旭, 等. 夹持方式对KDP晶体三倍频转换效率的影响[J]. 强激光与粒子束, 2011, 23(6): 1553-1558.

    Jia Kai, Yuan Xiaodong, Xu Xu, et al.. Influence of clamping modes in KDP crystal on conversion efficiency of third harmonic generation［J］. High Power Laser and Particle Beams, 2011, 23(6): 1553-1558.

[12] S Moaveni. Finite Element Analysis: Theory and Application with ANSYS［M］. London: Prentice Hall PTR Upper Saddle River, 1999. 168-231.

[13] P W Milonni, J M Auerbach, D Eimerl. Frequency conversion modeling with spatially and temporally varying beams［C］. SPIE, 1997, 2633: 230-241.

[14] Y Altintas, D Montgomery, E Budak. Dynamic peripheral milling of flexible structures［J］. J Engineering for Industry, 1992, 114(2): 137-145.

[15] M Wan, W H Zhang, K P Qiu. Numerical prediction of static form errors in peripheral milling of thin-walled workpieces with irregular meshes［J］. J Manufacturing Science and Engineering, 2005, 127(1): 13-22.