强激光与粒子束, 2013, 25 (11): 2856, 网络出版: 2013-11-14   

42CrMo轧辊激光熔覆TiC-VC增强铁基熔覆层性能

Properties of in-situ formed TiC-VC particle reinforced Fe-based alloy composite coatings produced by laser cladding on 42CrMo roller
作者单位
山东大学 材料液固结构演变与加工教育部重点实验室, 济南 250061
摘要
采用同步送粉方式,在42CrMo轧辊基材上利用钛铁、钒铁和石墨等通过激光熔覆原位自生反应,制备了成型良好、致密无气孔、无裂纹、与基体呈冶金结合的TiVC2增强铁基熔覆层。利用X射线衍射、电子探针、显微硬度计、电化学工作站研究了熔覆层的显微组织及性能。结果表明,熔覆层中碳化物为TiVC2,TiVC2大小约0.5~2.0 μm,呈多角块状均匀分布,碳化物对应两种不同的形核机制:以氧化铝异质形核和碳化物自发形核。随着熔覆合金粉末中TiC-VC数量的增加,熔覆层硬度并不呈简单的线性增加,熔覆层的耐蚀性逐渐变差。
Abstract
By using synchronous powder feeding system, Fe-based cladding layers reinforced with in-situ TiVC2 particles were synthesized on 42CrMo roller by laser cladding the mixture powders of ferrotitanium, ferrovanadium and graphite. The cladding layers have good forming and metallurgical bonding with the substrate, without porosity and cracks. The microstructure and properties of the cladding layers were investigated by means of X-ray diffractometry (XRD), electron probe micro-analyzer (EPMA), microhardness tester and electrochemical workstation. The results show that the carbides in cladding layers are TiVC2 with a size of 0.5~ 2 μm and these polygonal carbides distribute evenly in cladding layers. These carbides have two different nucleation mechanisms: the heterogeneous nucleation on alumina and the carbide spontaneous nucleation. With the increasing of Ti-VC in alloy powders, the hardness of cladding layers does not increase linearly, and the corrosion resistance of cladding layers decreases gradually.
参考文献

[1] Riabkina-Fishman M, Zahavi J. Laser alloying and cladding for improving surface properties[J]. Applied Surface Science, 1996, 106: 263-267.

[2] Yakovlev A, Bertrand P, Smurov I. Laser cladding of wear resistant metal matrix composite coatings[J]. Thin Solid Films, 2004, 453: 133-138.

[3] Yang Sen, Liu Wenjin, Zhong Minlin, et al. TiC reinforced composite coating produced by powder feeding laser cladding[J]. Materials Letters, 2004, 58: 2958-2962.

[4] Zhang Wei. Research on microstructure and property of Fe-VC composite material made by laser cladding[J]. Physics Procedia, 2012, 25: 200-204.

[5] 李桂花, 邹勇, 邹增大, 等. 激光熔覆原位合成Nb(C,N)陶瓷颗粒增强铁基金属涂层[J]. 强激光与粒子束, 2012, 24(11): 2735-2740.(Li Guihua, Zou Yong, Zou Zengda, et al. In-situ synthesis of Nb(C,N) ceramic particles reinforced Fe-based composite coatings by laser cladding. High Power Laser and Particle Beams, 2012, 24(11): 2735-2740)

[6] 齐勇田, 邹增大, 王新洪, 等. 激光熔覆原位生成Ti(C,N)颗粒强化半钢轧辊熔覆层[J]. 焊接学报, 2008, 29(8):69-72.(Qi Yongtian, Zou Zengda, Wang Xinhong, et al. Investigation of in-situ formed Ti(C, N) particle reinforced Fe-based alloy composite coatings on adamite by laser cladding. Transactions of the China Welding Institution, 2008, 29(8):69-72)

[7] 杜宝帅, 李清明, 王新洪, 等. 激光熔覆原位自生TiC-VC颗粒增强Fe基金属陶瓷涂层[J]. 焊接学报, 2007, 28(4):65-68.(Du Baoshuai, Li Qingming, Wang Xinhong, et al. In situ synthesis of TiC-VC particles reinforced Fe-based metal matrix composite coating by laser cladding. Transactions of the China Welding Institution, 2007, 28(4): 65-68)

[8] 王新洪, 邹增大, 宋思利, 等. TiC-VC免预热耐磨堆焊焊条[J]. 焊接学报, 2003, 23(4):31-34.(Wang Xinhong, Zou Zengda, Song Sili, et al. Development of TiC-VC hardfacing electrode with non-preheating and wear resistance properties. Transactions of the China Welding Institution, 2003, 23(4): 31-34)

[9] Wang Xinhong, Zou Zengda, Qu Shiyao. Microstructure of Fe-based alloy hardfacing coating reinforced by TiC-VC particles[J]. Journal of Iron and Steel Research, 2006, 13(4): 51-55.

[10] 施瀚超, 邹增大, 邹勇, 等. 新型双熔敷极TiC-VC增强耐磨堆焊组织与性能[J]. 焊接学报, 2011, 32(3): 109-112.(Shi Hanchao, Zou Zengda, Zou Yong, et al. Study on microstructure and properties of TiC-VC particles reinforced surfacing layer prepared by novel twin electrodes welding. Transactions of the China Welding Institution, 2011, 32(3): 109-112)

张辉, 邹勇, 邹增大, 王振坤. 42CrMo轧辊激光熔覆TiC-VC增强铁基熔覆层性能[J]. 强激光与粒子束, 2013, 25(11): 2856. Zhang Hui, Zou Yong, Zou Zengda, Wang Zhenkun. Properties of in-situ formed TiC-VC particle reinforced Fe-based alloy composite coatings produced by laser cladding on 42CrMo roller[J]. High Power Laser and Particle Beams, 2013, 25(11): 2856.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!