[1] 杜海宪, 徐锋, 洪流, 等. SUS301L不锈钢冷轧产品的开发[J]. 世界钢铁, 2010( 6): 52- 54.

    Du HX, XuF, HongL, et al. Development of SUS301L cold rolled stainless steel products[J]. World Iron & Steel, 2010( 6): 52- 54.

[2] 刘伟, 李强, 焦德志, 等. 冷轧301L奥氏体不锈钢的变形和应变硬化行为[J]. 金属学报, 2008, 44(7): 775-780.

    Liu W, Li Q, Jiao D Z, et al. Deformation and strain hardening behaviors of austenitic cold rollded 301L stainless steels[J]. Acta Metallurgica Sinica, 2008, 44(7): 775-780.

[3] Liu W, Sun C J, Xu X Y, et al. The influences of nugget diameter on the mechanical properties and the failure mode of resistance spot-welded metastable austenitic stainless steel[J]. Materials & Design, 2012, 33: 292-299.

[4] 唐舵, 王春明, 田曼, 等. SUS301L-HT不锈钢激光焊接与MIG焊接对比试验研究[J]. 中国激光, 2015, 42(7): 0703003.

    Tang D, Wang C M, Tian M, et al. Contrasting study on quality of SUS301L-HT jointsin fiber laser welding and MIG welding[J]. Chinese Journal of Lasers, 2015, 42(7): 0703003.

[5] 陈洋, 吴世凯, 肖荣诗. SUS301L不锈钢CO2激光-MIG复合焊接头组织性能研究[J]. 中国激光, 2014, 41(1): 0103004.

    Chen Y, Wu S K, Xiao R S. Microstructure and performance of CO2-MIG hybrid welding of SUS301L stainless steel[J]. Chinese Journal of Lasers, 2014, 41(1): 0103004.

[6] 陈洋, 吴世凯, 肖荣诗. SUS301L不锈钢薄板CO2激光-MIG复合焊工艺研究[J]. 应用激光, 2013, 33(2): 158-163.

    Chen Y, Wu S K, Xiao R S. Study on CO2-MIG hybrid welding of SUS301L stainless steel sheet[J]. Applied Laser, 2013, 33(2): 158-163.

[7] 朱国仁, 陈松, 李蒙蒙. SUS301L不锈钢非熔透型激光搭接焊的疲劳特性分析[J]. 焊接学报, 2016, 37(4): 14-18.

    Zhu G R, Chen S, Li M M. Study on fatigue performance of stainless steel non-penetration laser lap welding of SUS301L stainless steel body[J]. Transactions of the China Welding Institution, 2016, 37(4): 14-18.

[8] 张岩, 谷晓燕, 朱丽娟, 等. SUS301L薄板不锈钢脉冲激光焊接头的组织特点与硬度分布[J]. 材料热处理学报, 2016, 37(s): 55-60.

    ZhangY, Gu XY, Zhu LJ, et al. Microstructure characteristics and hardness distribution of pulsed laser welded SUS301L stainless steel sheet joint[J]. Transactions of Materials and Heat Treatment, 2016, 37( s): 55- 60.

[9] Fu Z H, Gou G Q, Xiao J, et al. The effect of temperature on the SCC behavior of AISI301L stainless steel welded joints in 3.5% NaCl solution[J]. International Journal of Modern Physics B, 2017, 31(16/17/18/19): 1744048.

[10] 龚利华, 戚霞. 焊接及热处理工艺对0Cr18Ni9Ti不锈钢耐蚀性的影响[J]. 金属热处理, 2009, 34(6): 90-93.

    Gong L H, Qi X. Influence of welding and heat treatment processes on corrosion resistance of 0Cr18Ni9Ti stainless steel[J]. Heat Treatment of Metals, 2009, 34(6): 90-93.

[11] 孙晓娜, 雷毅, 张鹰. 厚板奥氏体不锈钢焊缝显微组织分析[J]. 金属热处理, 2006, 31(10): 21-23.

    Sun X N, Lei Y, Zhang Y. Microstructure analysis of weld joint for austenitic stainless steel thick plate[J]. Heat Treatment of Metals, 2006, 31(10): 21-23.

[12] 柯伸道. 焊接冶金学[M]. 闫久春, 杨建国, 张广军, 译. 北京: 高等教育出版社, 2012.

    KouS. Welding metallurgy[M]. Yan J C, Yang J G, Zhang G J, Transl. Beijing: Higher Education Press, 2012.