填充粉末对铝合金高功率CO<sub>2</sub>激光焊接的影响

张盛海; 陈铠; 肖荣诗; 左铁钏

中国激光, 2005, 32 (6): 860, 网络出版: 2006-06-06

填充粉末对铝合金高功率CO₂激光焊接的影响

Influence of Metal Powder on High Power CO2 Laser Welding of Aluminum Alloy

论文大纲

张盛海 ^*陈铠肖荣诗左铁钏

作者单位

北京工业大学激光工程研究院,北京 100022

激光技术铝合金合金粉末 CO2激光焊接光致等离子体功率密度 laser technique aluminum alloy metal powder CO2 laser welding laser-induced plasma power density

摘要

通过采用和不采用填充合金粉末的比较试验,研究了填充合金粉末对铝合金高功率CO2激光焊接功率阈值、焊缝成形和焊接过程稳定性的影响。实验表明,合金粉末的加入可以提高焊接过程中激光能量的有效利用率;激光深熔焊接时的临界功率密度明显降低,合金粉末还可以减弱等离子体在高度方向上的膨胀跳动,使等离子体在工件表面能维持跳动幅度的相对稳定,有利于获得较为稳定的焊接过程和理想的焊缝成形,并通过试验,获得了焊缝饱满,有一定余高和鱼鳞纹光滑的焊缝。

Abstract

The influences of the filler metal powder on the intensity threshold, weld formation and process stability have been studied during high power CO2 laser welding of aluminum alloy through the comparison between welding with and without metal powder. The experiment results demonstrate that the addition of the metal powder enhances the energy coupling efficiency during laser welding and reduces the power density threshold which has been validated by the testing data of Laserscope UFF 100.The power density threshold of A2219 can be reduce to about 50%. Meanwhile, the pictures collected by the high speed camera indicate that the addition of the metal powder weakens the fluctuation of the laser-induced plasma and keeps the plasma stabilizing above the workpiece. So a stable welding process and well-formed weld can be obtained in a relatively easy way.

参考文献

[1] H. Sakamoto, K. Shibata, F. Dausinger et al.. Laser welding of different aluminum alloys[C]. Laser Institute of America, 1993, 75: 523～528

[2] Yao Jianhua, Chen Zhijun, Sun Dongyue et al.. Technique and performance of laser welding diamond core drill bit [J]. Chinese J. Lasers, 2002, A29(7): 657～660
姚建华, 陈智君, 孙东跃等. 激光焊接金刚石薄壁钻工艺与性能 [J]. 中国激光, 2002, A29(7): 657～660

[3] Zuo Tie-chuan et al.. Laser Materials Processing of High Strength Aluminum Alloys[M]. Beijing: National Defence Industry Press, 2002
左铁钏等. 高强铝合金的激光加工[M]. 北京: 国防工业出版社, 2002

[4] C. A. Binroth, T. C. Zuo, G. Sepold. CO2-laser welding with filler materials of high strength aluminium alloy[C]. Proc. 2nd Int. Power beam Technology Conference, 1990. 119～127

[5] . Kutsuna, J. Suzuki, S. Kimura et al.. CO2 laser welding of A2219, A5083 and A6063 aluminium alloys[J]. Welding in the World, Le Soudage Dans Le Monde, 1993, 31(2): 126-135.

[6] T. Starzer, R. Ebner, W. Glatz et al.. Laser welding of aluminium alloys with continuous powder and wire feed[C]. Laser Applications in the Automotive Industries, 1993. 131

[7] Chen Kai, Wang Zhiyong, Xiao Rongshi et al.. Powder welding technique of Al alloy with high power slab CO2 laser[J]. Laser Journal, 2000, 21(5): 45～48
陈铠,王智勇,肖荣诗等. 铝合金的大功率扩散型CO2激光粉末焊接技术[J]. 激光杂志, 2000, 21(5): 45～48

[8] . Arnold, R. Volz. Laser powder technology for cladding and welding[J]. J. Thermal Spray Technol., 1999, 8(2): 243-248.

[9] . A. Folkes. Developments in laser surface modification and coating[J]. Surface and Coating Technol., 1994, 63(2): 65-71.

[10] Phiroze Kapadia, Robert Ducharme, John Dowden. The theory of radiative transfer in the plasma of the keyhole in penetration laser welding[C]. Laser Institute of America, 1992, 74: 53～63

张盛海, 陈铠, 肖荣诗, 左铁钏. 填充粉末对铝合金高功率CO₂激光焊接的影响[J]. 中国激光, 2005, 32(6): 860. 张盛海, 陈铠, 肖荣诗, 左铁钏. Influence of Metal Powder on High Power CO2 Laser Welding of Aluminum Alloy[J]. Chinese Journal of Lasers, 2005, 32(6): 860.

填充粉末对铝合金高功率CO₂激光焊接的影响

关于本站 Cookie 的使用提示

全站搜索

填充粉末对铝合金高功率CO2激光焊接的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

填充粉末对铝合金高功率CO₂激光焊接的影响