CO<sub>2</sub>激光-TIG复合焊接气体的保护方式

高明; 曾晓雁; 胡乾午; 严军

中国激光, 2006, 33 (10): 1422, 网络出版: 2006-10-31

CO₂激光-TIG复合焊接气体的保护方式

Shielding Gas Method of CO₂Laser-TIG Hybrid Welding

论文大纲

高明 ^1,2,*曾晓雁 ^1,2胡乾午 ^1,2严军 ^1,2

作者单位

¹ 武汉光电国家实验室激光部, 湖北武汉 430074

² 华中科技大学激光加工国家工程研究中心, 湖北武汉 430074

激光技术复合焊接保护气体焊接熔深 laser technique hybrid welding shielding gas weld penetration depth

摘要

保护气体组成及其保护方式是决定CO2激光-钨极氩弧焊(TIG)电弧复合焊接工艺稳定性和激光、电弧两种热源能否有效耦合并取得增强的焊接熔深的关键原因。为此,采用不同的气体保护方式在316L不锈钢板上进行了一系列CO2激光-TIG电弧复合焊接实验。结果表明,只有在合理的气体保护方式下才能取得增强的焊接结果,其中气体保护方式对激光等离子体和电弧等离子体相互作用程度的影响是决定能否有效耦合的关键因素。单独TIG焊炬保护不能保证激光和电弧的有效耦合,TIG焊炬加旁轴喷嘴的方式只能在较窄的参数范围内获得有效耦合,而TIG焊炬加同轴喷嘴的保护方式则在较宽的范围内都能保证两种热源的有效耦合。

Abstract

Shielding gas is the crucial reason for the process stability and the efficient synergetic effects between laser welding and CO2 laser-TIG (tungsten inert gas) hybrid welding, resulting in bigger weld penetration depth. A detailed experiment of CO2 laser-TIG hybrid welding with different shielding gas methods is carried out on the 316L stainless steel plate. The results showed that the welding penetration depth only can be enhanced under the appropriate shielding gas method, and the effect of shielding gas methods on the interaction extent between laser plasma and arc plasma is the main factor for efficient synergetic effect. The pure torch method cannot generate the efficient synergetic effects, and the hybrid protecting method by torch plus paraxial nozzle method has only a narrow parameter range for getting the efficient synergetic effects, while the hybrid protecting method by torch plus coaxial nozzle method can ensure the efficient synergetic effects under a considerable wide parameter range.

参考文献

[1] . M. Steen. Arc augmented laser processing of materials[J]. J. Appl. Phys., 1980, 51(11): 5636-5641.

[2] . Bagger, F. O. Olsen. Review of laser hybrid welding[J]. J. Laser Appl., 2005, 17(1): 2-14.

[3] . Tusek, M. Suban. Hybrid welding with arc and laser beam[J]. Science and Technology of Welding and Joining, 1999, 4(5): 308-311.

[4] C. Bagger, Lars de C. Sondrup, P. Flemming Ove Olsen. Laser/TIG hybrid welding of pot for induction heater ［C］. Proceedings of ICALEO 2004. San Francisco, California:LIA, 2004. Hybrid Laser Welding:60～69

[5] Liu Liming, Wang Jifeng, Song Gang. Hybrid laser-arc welding of AZ31B Mg alloy [J]. Chinese J. Lasers, 2004, 31(2):1523～1526
刘黎明,王继锋,宋刚. 激光电弧复合焊接AZ31B镁合金[J]. 中国激光, 2004, 31(2):1523～1526

[6] S. Fujinaga, R. Ohashi, S. Katayama. Improvements of welding characteristics of aluminum alloys with YAG laser and TIG arc hybrid system ［C］. SPIE, 2002, 4831:301～306

[7] Tang Xiahui, Zhu Haihong, Zhu Guofu et al.. Study of plasma control in high-power CO2 laser welding [J]. Chinese J. Lasers, 1997, A24(2):174～178
唐霞辉,朱海红, 朱国富等. 高功率CO2激光焊接等离子体控制试验研究[J]. 中国激光, 1997, A24(2):174～178

[8] Xiao Rongshi, Mei Hanhua, Zuo Tiechuan. Influence of assistant gases on the shielding thresholds of laser induced plasma during high power CO2 laser penetration welding [J]. Chinese J. Lasers, 1998, A25(11):1045～1050
肖荣诗,梅汉华, 左铁钏. 辅助气体对CO2激光焊接光致等离子体屏蔽的影响[J]. 中国激光, 1998, A25(11):1045～1050

[9] Hong Lei, Wu Gang, Chen Wuzhu. Influence of shielding gas flow on welding quality for CO2 laser welding of aluminum alloy [J]. Chinese J. Lasers, 2005, 32(11):1571～1576
洪蕾,吴刚, 陈武柱. 保护气流对CO2激光焊接铝合金的影响[J]. 中国激光, 2005, 32(11):1571～1576

[10] . Tusek, M. Suban. Experimental research of the effect of hydrogen in argon as a shielding gas in arc welding of high-alloy stainless steel[J]. Internat. J. Hydrogen Energy, 2000, 25: 369-376.

[11] M. Hamadou, R. Fabbro, G. Caillibotte. Effect of gas shielding delivery mode on high power CO2 laser welding ［C］. Proceedings of ICALEO 2004, San Francisco, California: LIA, 2004. Laser Welding & Brazing:171～180

[12] M. Kern, M. Beck, P. Berger et al.. Process stabilizing potential of shielding gas mixtures in laser welding with CO2 lasers ［C］. SPIE, 1997, 3092:526～529

[13] . Hu, G. den Ouden. Laser induced stabilisation of the welding arc[J]. Science and Technology of Welding and Joining, 2005, 10(1): 76-81.

[14] Y. B. Chen, Z. L. Lei, L. Q. Li. Study of welding characteristics in CO2 laser-TIG hybrid welding process ［C］. Proceedings of ICALEO 2003, Jacksonville, FL:LIA, 2003. Section A: 41～47

高明, 曾晓雁, 胡乾午, 严军. CO₂激光-TIG复合焊接气体的保护方式[J]. 中国激光, 2006, 33(10): 1422. 高明, 曾晓雁, 胡乾午, 严军. Shielding Gas Method of CO₂Laser-TIG Hybrid Welding[J]. Chinese Journal of Lasers, 2006, 33(10): 1422.

CO₂激光-TIG复合焊接气体的保护方式

关于本站 Cookie 的使用提示

全站搜索

CO2激光-TIG复合焊接气体的保护方式

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

CO₂激光-TIG复合焊接气体的保护方式