[1] 赵学颜,李迎春. 靶场光学测量［D］. 北京: 装备指挥技术学院,2001.

    ZHAO X Y,LI Y CH. Range optical measurement［D］. Beijing: The Academy of Equipment Command & Technology,2001. (in Chinese)

[2] 马品仲. 大型天文望远镜设计和研究［J］. 应用光学,1994,15(3): 6-11.

    MA P ZH. Design and study on the large astronomical telescope［J］. Applied Optics,1994,15(3): 6-11. (in Chinese)

[3] 杨佳林,黄巧文. 大口径反射镜结构参数优化设计［J］. 中国空间科学技术,2011(4): 77-33.

    YANG J L,HUANG Q W. Optimized design of structure parameters for large aperture mirrors ［J］. Chinese Space Science and Technology,2001(4): 77-83. (in Chinese)

[4] 李福,阮萍,赵葆常. 重力作用下平面反射镜变形研究［J］. 光子学报,2005,34(2): 272-275．

    LI F,RUAN P,ZHAO B CH. Study on the surface deformation of flat reflector under gravity load［J］. Acta Photonica Sinica,2005,34(2): 272-275. (in Chinese)

[5] 戴晓霖,鲜浩,唐金龙,等. 8 m能动薄主镜侧支撑设计［J］. 光学学报,2015,35(6): 255-262．

    DAI X L,XIAN H,TANG J L,et al.. Designing of lateral support system for an 8 m active thin mirror［J］. Acta Optical Sinica,2015,35(6): 255-262. (in Chinese)

[6] 邵亮,吴小霞,杨飞,等. SiC轻量化主镜液压whiffletree支撑系统的改进［J］. 红外与激光工程,2014,43(11): 3820-3824．

    SHAO L,WU X X,YANG F,et al.. Improvement on hydraulic whiffletree support system for SiC lightweight primary mirror［J］. Infrared & Laser Engineering,2014,43(11): 3820-3824. (in Chinese)

[7] 伞晓刚,孙宁,卓仁善,等. 大口径光电经纬仪主反射镜支撑结构设计［J］. 光学 精密工程,2013,21(12): 3111-3117．

    SAN X G,SUN N,ZHUO R SH,et al.. Design of supporting structure for primary mirror of large aperture theodolite［J］. Optics and Precision Engineering,2013,21(12): 3111-3117. (in Chinese)

[8] 李宗轩,金光,张雷,等. 3.5 m口径空间望远镜单块式主镜技术展望［J］. 中国光学,2014,7(4): 532-541．

    LI Z X,JIN G,ZHANG L,et al.. Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture［J］.Chinese Optics,2014,7(4): 532-541. (in Chinese)

[9] 张景旭. 地基大口径望远镜系统结构技术综述［J］. 中国光学,2012,5(4): 327-336.

    ZHANG J X. Overview of structure technologies of large aperture ground-based telescopes［J］.Chinese Optics,2012,5(4): 327-336. (in Chinese)

[10] 吴小霞,杨洪波,张景旭,等. 大口径球面镜支撑系统的优化设计［J］. 光子学报,2009,38(1): 129-132．

    WU X X,YANG H B,ZHANG J X,et al.. Optimal design of support system for the large-aperture sphere mirror［J］. Acta Photonica Sinica,2009,38(1): 129-132. (in Chinese)

[11] 王富国,杨洪波,杨飞,等. 大口径主镜轴向支撑点位置优化分析［J］. 红外与激光工程,2007,36(6): 877-880.

    WANG F G,Yang H B,YANG F,et al.. Optimization and analysis for the axis support points position of the large aperture mirrors［J］. Infrared & Laser Engineering,2007,36(6): 877-880. (in Chinese)

[12] 范李立,张景旭,姜皓,等. 极轴式望远镜主镜支撑设计［J］. 红外与激光工程,2011,40(3): 476-479.

    FAN L,ZHANG J X,JIANG H,et al.. Design of the primary mirror support of equatorial telescope［J］. Infrared & Laser Engineering,2011,40(3): 476-479. (in Chinese)

[13] 庄茁,由小川,廖剑晖,等. 基于ABAQUS的有限元分析和应用［M］. 北京: 清华大学出版社,2011.

    ZHUANG ZH,YOU X CH,LIAO J H,et al.. Based on ABAQUS finite element analysis and application［M］. Beijing: Tsinghua Unversity Press,2011. (in Chinese)

[14] 谢军,曹立华,韩光宇,等. 考虑接触边界条件的经纬仪主镜面形误差分析［J］. 光子学报,2014,43(12): 1212004.

    XIE J,CAO L H,HAN G Y,et al.. The surface error analysis of theodolite primary mirror considering boundary condition［J］. Acta Photonica Sinica,2014,43(12): 1212004. (in Chinese)

[15] 邵亮,吴小霞,陈宝刚,等. SiC轻量化主镜的被动支撑系统［J］. 光学 精密工程,2015,23(5): 1380-1386.

    SHAO L,WU X X,CHEN B G,et al.. Passive support system of light-weighted SiC primary mirror［J］. Optics and Precision Engineering,2015,23(5): 1380-1386. (in Chinese)