激光重熔对TC4钛合金表面激光原位熔覆层微观组织与性能的影响
[1] C. Guo, J. Zhou, J. Zhao et al.. Microstructure and friction and wear behavior of laser boronizing composite coatings on titanium substrate［J］. Appl. Surf. Sci., 2011, 257(9): 4398～4405
[2] N. Tsuji, S. Tanaka, T. Takasugi. Evaluation of surface-modified Ti-6Al-4V alloy by combination of plasma-carburizing and deep-rolling［J］. Mater. Sci. Engng. A, 2008, 488(1): 139～145
[3] C. Guo, J. Zhou, J. Chen et al.. Improvement of the oxidation and wear resistance of pure Ti by laser cladding at elevated temperature［J］. Surf. Coat. Technol., 2010, 205(7): 2142～2151
[4] H. C. Man, S. Zhang, F. T. Cheng et al.. Microstructure and formation mechanism of in situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser cladding［J］. Scripta Materialia, 2001, 44(12): 2801～2807
[5] 田浩, 耿林, 倪丁瑞 等. TC4合金表面激光熔覆B4C及B4C＋Ti粉末熔层的微观组织 ［J］. 稀有金属材料与工程, 2007, 36(3): 420～423
Tian Hao, Geng Lin, Ni Dingrui et al.. Microstructure of laser cladding coating with pre-placed B4C and B4C+Ti powders on TC4 substrate［J］. Rare Metal Materials and Engineering, 2007, 36(3): 420～423
[6] Li Fangcai, Yong Zhongzhang, Li Kaishi. Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding［J］. Rare Metals, 2007, 26(4): 342～346
[7] 牛伟, 孙荣禄. 钛合金激光熔覆的研究现状与发展趋势［J］. 材料导报, 2006, 20(7): 58～60
Niu Wei, Sun Ronglu. Research progress and development on laser cladding on titanium alloys surface［J］. Materials Review, 2006, 20(7): 58～60
[8] 王新林, 郑启光. 石油化学阀门激光熔覆层凝固组织控制的研究［J］. 光电子·激光, 2002, 13(3): 285～287
Wang Xinlin, Zheng Qiguang. Study on the solidification microstructure control of layer during laser cladding sealing surface of petrochemical valves［J］. J. Optoelectronics·Laser, 2002, 13(3): 285～287
[9] T. B. Massalski. Binary Alloy Phase Diagrams ［M］ . Materials Park: American Society for Metals, 1990. 165,189
[10] 李志远, 赵伟毅, 古文全 等. Ti对Co基合金激光熔覆层组织与性能的影响［J］. 中国激光, 2010, 37(8): 2086～2090
[11] W. Kurz, D. J. Fisher. Fundamentals of Solidification［M］ . Enfield: Trans Tech Publications Ltd., 1998. 86～88
[12] 王维夫. 采用激光与微弧火花制备铝、钛合金自生复合强化熔层研究［D］. 沈阳：东北大学, 2008. 66
Wang Weifu. Study on in-situ Synthesized Composite Coatings of Aluminum Alloy and Titanium Alloy Prepared by Laser Cladding and Electrospark Depositio ［D］. Shenyang: Northeastern University, 2008. 66
林英华, 李月华, 陈志勇, 朱卫华, 文向东, 王新林. 激光重熔对TC4钛合金表面激光原位熔覆层微观组织与性能的影响[J]. 激光与光电子学进展, 2012, 49(4): 041403. Lin Yinghua, Li Yuehua, Chen Zhiyong, Zhu Weihua, Wen Xiangdong, Wang Xinlin. Effect of Laser Remelting on Microstructure and Properties of In-Situ Coating by Laser Cladding on TC4 Titanium Alloy[J]. Laser & Optoelectronics Progress, 2012, 49(4): 041403.
PDF全文
