强激光与粒子束, 2014, 26 (3): 035104, 网络出版: 2014-03-31   

束流模拟装置的阻抗对标定结果的影响

Influence of beam test stand’s impedance on calibration results
作者单位
中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
摘要
对偏心束流在束流管道中产生的电磁场和束流模拟装置的偏心同轴线中的电磁场进行了理论分析。分析表明,在束流模拟装置阻抗较小时,二者存在显著差异。该差异对束流流强探测器、束流位置探测器和束流偏角探测器的标定有一定的影响。如果采用阻抗为50 Ω的束流模拟装置标定束流位置探测器,得到的等效管道半径将比真实值偏小19%。利用理论分析结果,合理地解释了一个B-dot束流位置探测器的标定结果。
Abstract
The coaxial beam test stand was used to calibrate the beam position monitors and the beam current monitors. The electric and magnetic field in the beam test stand with displaced inner conductor was analyzed in theory. The results show that, when the impedance of the test stand is not very small, the electromagnetic (EM) field in the test stand is significantly different to the EM field in the beam-pipe generated by the beam. The difference of the EM field can lead to non-negligible calibration errors of beam monitors such as B-dot monitors and resistive wall monitors. The influence on the B-dot beam position monitors predicted by the theory calculation agrees well with experimental results.
参考文献

[1] 谢宇彤, 代志勇, 韩青. 电阻环束流探测器的标定[J]. 强激光与粒子束, 2002, 14(1): 151-155.(Xie Yutong, Dai Zhiyong, Han Qing, Improvement on the accuracy of beam bugs in linear induction accelerator. High Power Laser and Particle Beams, 2002, 14(1): 151-155)

[2] 李勤, 李洪, 陈楠, 等. 用于测量强流脉冲电子束的B-dot[J]. 强激光与粒子束, 2009, 21(9):1390-1394.(Li Qin, Li Hong, Chen Nan, et al. B-dot monitor for intense electron beam measurement. High Power Laser and Particle Beams, 2009, 21(9):1390-1394)

[3] 徐铁铮, 王华岑, 谢宇彤, 等. 用钮扣电极测量强流直线感应加速器束流位置[J]. 强激光与粒子束, 2004, 16(1):1-94.(Xu Tiezheng, Wang Huacen, Xie Yutong, et al. Experiment study on four button electrode used to monitor positon of high current electron-beam. High Power Laser and Particle Beams, 2004, 16(1):1-94)

[4] 王盛昌, 王安鑫, 徐韬光. 用于质子加速器的壁电流探头的研制[J]. 强激光与粒子束, 2012, 24(9): 2179-2182.(Wang Shengchang, Wang Anxin, Xu Taoguang. Design of wall current monitor for proton accelerator. High Power Laser and Particle Beams, 2012, 24(9):2179-2182)

[5] Ma L, Shi P. Upgrade of the BPM system for the BEPC storage ring[J]. Proc IEEE, 1998, 80(4):2075-2077.

[6] Hinode F. A conventional read-out electronics for the button-type BPM in the atf damping ring[J]. Proc IEEE, 1998, 80(2):578-580.

[7] 王筠华, 沈连官, 王贵诚, 等. HLS 新研制的束流位置探测器定标和误差分析[J]. 高能物理与核物理, 2001, 25(11):1120-1127.(Wang Junhua, Shen Lianguan, Wang Guicheng, et al. Calibration and error calculation for the newly BPM system in HLS. High Energy Physics and Nuclear Physics, 2001, 25(11):1120-1127)

[8] 王筠华, 刘建宏, 刘祖平, 等. HLS 注入段束流位置探头定标电场的拟合和误差计算[J]. 强激光与粒子束, 2001, 13(5):560-564.(Wang Junhua, Liu Jianhong, Liu Zuping, et al. Electric field fit and error calculation of the calibration system of BPMs for HLS injection system. High Power Laser and Particle Beams, 2001, 13(5):560-564)

[9] He Xiaozhong, Zhang Kaizhi, Li Qin. Direct measurement of the beam deflection angle using the axial B-dot field[J]. Physical Review Special Topics on Accelerators and Beams, 2011: 052804.

[10] Johnson R, Smith S, Kurita N. Calibration of the beam-position monitor system for the SLAC[C]//Proceedings of PAC 97. 1997: 2110-2112.

[11] Chao A W. Physics of collective beam instabilities in high energy accelerators[M]. New York: Jon Wiley & Sons, 1993: 6-7.

[12] 肖飚. 保角变换在计算绝缘偏心对射频同轴电缆电性能中的应用[C]//中国通信学会2008年光缆电缆学术年会论文集. 2008.(Xiao Biao. Calculation of performance of RF coaxial cable using conformal transformation//Proceeding of academic conference on fiber and electrical cable of Chinese communication society in 2008. 2008)

何小中, 庞健, 李勤, 代志勇. 束流模拟装置的阻抗对标定结果的影响[J]. 强激光与粒子束, 2014, 26(3): 035104. He Xiaozhong, Pang Jian, Li Qin, Dai Zhiyong. Influence of beam test stand’s impedance on calibration results[J]. High Power Laser and Particle Beams, 2014, 26(3): 035104.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!