中国激光, 2014, 41 (9): 0903005, 网络出版: 2014-09-11   

YAG激光焊接等离子体电信号检测与焊接模式分析

Electrical Detection of the Plasma and Analysis of Welding Modes in YAG Laser Welding
作者单位
1 天津大学材料科学与工程学院, 天津 300072
2 天津大学天津市现代连接技术重点实验室, 天津 300072
摘要
激光等离子体中包含了反映激光焊接过程特征的信息。利用激光等离子体光电信号同步检测系统,检测激光等离子体的光电信号并进行光电信号的对比分析,阐明了电信号与等离子体温度之间的关系;对A304不锈钢、430不锈钢、碳钢Q235等材料的激光表面自熔焊接过程的等离子体电信号进行了实时检测及概率密度分布分析,对深熔焊特征最明显的A304不锈钢进行了电信号概率密度分布的标准差分析。研究结果表明:利用激光等离子体电信号能够实时反映激光焊接等离子体的温度变化的特点,可以根据激光等离子体电信号概率密度分布来分析激光焊接模式的特点,进一步的标准差分析法可以判断A304不锈钢激光焊接的模式。
Abstract
A lot of information reflecting laser welding process are involved in laser-induced plasma. The electrical signal and spectral signal from laser-induced plasma are detected by a synchronous electrical and spectral information acquisition system and the signals are compared. And then the relationship between electrical signal and plasma temperature is illustrated. The electrical signals of the induced-plasma for stainless steel A304、stainless steel 430 and carbon steel Q235 in laser surface auto genous welding are detected in real-time and analyzed by the probability density distribution. The analysis of the standard deviation of probability density distribution of the electrical signal from the strainless steel A304 laser welding with the most obvious deep penetration characteristics is presented. The results indicate that the temperature variation of laser induced-plasma can be real-timely detected by the electrical signal, and laser welding mode can be identifed by the probability density analysis of the electrical signal of the laser induced-plasma and the laser welding mode of stainless steel A304 can be determined by the standard deviation analysis.
参考文献

[1] 徐彬. 对激光焊接接技术的分析研究[J]. 科技创新与应用, 2013, (3): 41.

    Xu Bin. Analysis and research of laser welding technology[J]. Technology Innovation and Application, 2013, (3): 41.

[2] Genyu Chen, Mingjun Zhang, Zhi Zhao, et al.. Measurements of laser-induced plasma temperature field in deep penetration laser welding[J]. Optics & Laser Technology, 2013, (45): 551-557.

[3] 张健, 杨锐. 激光焊接接钛合金薄板时的功率控制[J]. 中国激光, 2012, 39(1): 0103003.

    Zhang Jian, Yang Rui. Control of laser power during titanium alloy thin plate welding[J]. Chinese J Lasers, 2012, 39(1): 0103003.

[4] 张建, 杨锐. 脉冲激光焊接接钛合金薄板的熔池深度预测[J]. 中国激光, 2012, 39(3): 0303001.

    Zhang Jian, Yang Rui. Weld penetration depth prediction of pulsed laser welding titanium alloy thin plate[J]. Chinese J Lasers, 2012, 39(3): 0303001.

[5] 张屹, 段林勇, 周惦武, 等. 镀锌钢激光添粉焊接的等离子体监测机理[J]. 中国激光, 2012, 39(5): 0503005.

    Zhang Yi, Duan Linyong, Zhou Dianwu, et al.. Monitoring mechanism of plasma generated by laser welding galvanized steel with powder feeding[J]. Chinese J Lasers, 2012, 39(5): 0503005.

[6] 刘京雷, 陈彦宾, 徐庆鸿. 激光焊接接声信号与熔深的相关性[J]. 焊接学报, 2006, 27(1): 72-80.

    Liu Jinglei, Chen Yanbin, Xu Qinghong. The correlation of acoustic signal and penetration laser welding[J]. Transactions of the China Welding Institution, 2006, 27(1): 72-80.

[7] 姜平, 陈武柱, 国静, 等. 激光焊接接等离子体声信号的傅里叶分析[J]. 激光杂志, 2001, 22(5): 62-63.

    Jiang Ping, Chen Wuzhu, Guo Jing, et al.. The FFT analyse of the acoustic signal on plasma in laser welding[J]. Laser Journal, 2001, 22(5): 62-63.

[8] 王春明, 胡伦骥, 胡席远, 等. 钛合金激光焊接接过程种等离子体光信号的检测与分析[J]. 焊接学报, 2004, 25(11): 83-90.

    Wang Chunming, Hu Lunji, Hu Xiyuan, et al.. Plasma optical signal detection and analysis in the process of titanium alloy laser welding[J]. Transactions of the China Welding Institution, 2004, 25(11): 83-90.

[9] 王春明, 吴松坪, 胡伦骥, 等. 基于多传感器融合的激光焊接接熔透状态的识别[J]. 中国激光, 2007, 34(4): 538-544.

    Wang Chunming, Wu Songping, Hu Lunji, et al.. Identification of different laser welding penetration states based on multi-sensor fusion[J]. Chinses J Lasers, 2007, 34(4): 538-544.

[10] Cherring B E. The use of electrostatic probes for plasma diagnostics-a review[J]. Plasma Process, 1982, 2(2): 113-139.

[11] Bi Chao, Yang Lijun, Xu Wenhao. An electrical detection of the fluctuating plasma of laser welding with a passive probe[J]. Journal of Physics D: Applied Physics, 2012, 45(38): 385202.

[12] 刘桐, 杨立军, 王立君, 等. 激光等离子体无源电探针探测及光谱诊断的比较分析[J]. 光谱学与光谱分析, 2014, 34(2): 289-292.

    Liu Tong, Yang Lijun, Wang Lijun, et al.. A comparative analysis of the pas-sive electric probe detection and spectrum diagnosis of laser-induced plasma[J]. Spectroscopy and Spectral Analysis, 2014, 34(2): 289-292.

[13] Y Kawahito, N Matsumoto, M Mizutani, et al.. Characterisation of plasma induced during high power fibre laser welding of stainless steel[J]. Science and Technology of Welding and Joining, 2008, 13(8): 744-748.

[14] Jun Wang, Chunming Wang, Xuanxuan Meng, et al.. Study on the periodic oscillation of plasma vapor induced during high power fibre laser penetration welding[J]. Optics & Laser Technology, 2012, 44(1): 67-70.

焦娇, 杨立军, 刘桐, 杜笑, 王会超. YAG激光焊接等离子体电信号检测与焊接模式分析[J]. 中国激光, 2014, 41(9): 0903005. Jiao Jiao, Yang Lijun, Liu Tong, Du Xiao, Wang Huichao. Electrical Detection of the Plasma and Analysis of Welding Modes in YAG Laser Welding[J]. Chinese Journal of Lasers, 2014, 41(9): 0903005.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!