[1] 李嘉荣, 熊继春, 唐定中. 先进高温结构材料与技术(下)[M]. 北京: 国防工业出版社, 2012: 9.

    Li Jiarong, Xiong Jichun, Tang Dingzhong. Advanced high-temperature structural materials and technology (below)[M]. Beijing: National Defense Industry Press, 2012: 9.

[2] 孙立喜, 刘晓烈, 潘辉. 球墨铸铁在汽车覆盖件拉伸模中的应用[J]. 金属材料与冶金工程, 2008, 36(4): 11-13.

    Sun Lixi, Liu Xiaolie, Pan Hui. The application of ductile cast iron in automobile panel drawing die[J]. Metal Materials and Metallurgy Engineering, 2008, 36(4): 11-13.

[3] Chichinadze A V. Calculation and investigation of external friction during braking[J]. Moscow, Nauka, 1967: 3.

[4] Feng X, Zhou J Z, Mei Y F, et al.. Improving tribological performance of gray cast iron by laser peening in dynamic strain aging temperature regime[J]. Chinese Journal of Mechanical Engineering, 2015, 28(5): 904-910.

[5] 袁润, 程云荣, 符永宏, 等. 线接触副球墨铸铁表面激光织构对摩擦学特性的影响[J]. 江苏大学学报, 2013, 34(4): 450-454.

    Yuan Run, Cheng Yunrong, Fu Yonghong, et al.. Influence of laser surface texturing on tribological performance of ductile cast iron under line contact conditions[J]. Journal of Jiangsu University, 2013, 34(4): 450-454.

[6] 熊绪刚, 刘文今, 张红军, 等. 球墨铸铁活塞环激光合金化及其摩擦磨损特性的研究[J]. 金属热处理, 2000(7): 5-7.

    Xiong Xugang, Liu Wenjin, Zhang Hongjun, et al.. Investigation on laser alloying of nodular cast iron piston ring and research on characteristics of wear resistance of piston ring-cylinder[J]. Heat Treatment of Metals, 2000(7): 5-7.

[7] 刘安民, 汪新衡, 匡建新, 等. 球墨铸铁摩擦副激光熔覆处理层摩擦磨损研究[J]. 工具技术, 2011, 45(5): 44-46.

    Liu Anmin, Wang Xinheng, Kuang Jianxin, et al.. Study on friction and wear of cast iron friction surface layer by laser cladding[J]. Tool Engineering, 2011, 45(5): 44-46.

[8] Montross C S, Wei T, Ye L, et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: A review[J]. International Journal of Fatigue, 2002, 24(10): 1021-1036.

[9] Yao Z Q, Lawrence Y Y, Wang F, et al.. Progress in advanced laser assisted manufacturing technology[J]. Chinese Journal of Mechanical Engineering, 2003, 39(12): 57-61.

[10] 黄志辉, 刘会霞, 沈宗宝, 等. 工艺参数对激光冲击微造型效果的影响[J]. 中国激光, 2012, 39(5): 0503004.

    Huang Zhihui, Liu Huixia, Shen Zongbao, et al.. Process parameters analysis on surface texturing under laser shock peening[J]. Chinese J Lasers, 2012, 39(5): 0503004.

[11] Luo K Y, Wang C Y, Li Y M, et al.. Effects of laser shock peening and groove spacing on the wear behavior of non-smooth surface fabricated by laser surface texturing[J]. Applied Surface Science, 2014, 313: 600-606.

[12] 王霄, 夏立齐, 高传玉, 等. 表面微造型技术改善物体表面摩擦性能的研究[J]. 润滑与密封, 2006, (4): 167-170.

    Wang Xiao, Xia Liqi, Gao Chuanyu, et al.. Research in improving tribology performance by surface texturing[J]. Lubrication Engineering, 2006(4): 167-170.

[13] Zhang W W, Yao Y L, Noyan I C. Microscale laser shock peening of thin films, part 2: High spatial resolution material characterization[J]. Journal of Manufacturing Science and Engineering, 2004, 126(1): 18-24.

[14] Morales M, Porro J A, Blasco M, et al.. Numerical simulation of plasma dynamics in laser shock processing experiments[J]. Applied Surface Science, 2009, 255(10): 5181-5185.

[15] 钟金杉, 鲁金忠, 罗开玉, 等. 激光冲击对AISI304不锈钢拉伸性能和摩擦磨损性能的影响[J]. 中国激光, 2013, 40(5): 0503002.

    Zhong Jinshan, Lu Jinzhong, Luo Kaiyu, et al.. Influence of laser shock processing on tensile properties and tribological behaviors of AISI304 stainless steel[J]. Chinese J Lasers, 2013, 40(5): 0503002.

[16] Shepard M J. Laser shock processing induced residual compression: impact on predicted crack growth threshold performance[J]. Journal of Materials Engineering and Performance, 2005, 14(4): 495-502.

[17] 余宪海. 表面残余应力对滑动磨损的影响[J]. 武汉水运工程学院学报, 1991, 15(3): 303-309.

    Yu Xianhai. Effect of residual stressof surface on sliding wear[J]. Journal of Wuhan University of Water Transportation Engineering, 1991, 15(3): 303-309.

[18] 华希俊, 符永宏, 袁润, 等. 激光微造型表面摩擦磨损性能研究[J]. 润滑与密封, 2007, 32(5): 20-22.

    Hua Xijun, Fu Yonghong, Yuan Run, et al.. Study on friction and wear performance of laser texturing surface[J]. Lubrication Engineering, 2007, 32(5): 20-22.

[19] Krupka I, Hartl M, Zimmerman M, et al.. Effect of surface texturing on elastohydrodynamically lubricated contact under transient speed conditions[J]. Tribology International, 2011, 44(10): 1144-1150.

[20] Ding T, Chen G X, Zhu M H, et al.. Influence of the spring stiffness on friction and wear behaviours of stainless steel/copper impregnated metallized carbon couple with electrical current[J]. Wear, 2009, 267(5): 1080-1086.

[21] Yi F, Zhang M, Xu Y. Effect of the electric current on the friction and wear properties of the CNT-Ag-G composites[J]. Carbon, 2005, 43(13): 2685-2692.

[22] 何换菊, 张凌峰, 杨根妹, 等. 激光冲击强化AZ31镁合金摩擦磨损性能的研究[J]. 中国激光, 2015, 42(9): 0906003.

    He Huanju, Zhang Lingfeng, Yang Genmei, et al.. Friction and wear properties of AZ31 magnesium alloy by laser shock processing[J]. Chinese J Lasers, 2015, 42(9): 0906003.