[1] FAN A G, SHI Y H. Research progress of high performance bombed tungsten heavy alloy in foreign[J]. Ordnance Material Science and Engineering, 1999, 22(1): 45-48(in Chinese).

[2] ZHONG M L, LIU W J, NING G Q, et al. Laser direct manufacturing of tungsten nickel collimation component[J]. Journal of Materials Processing Technology, 2004, 147(2):167-173.

[3] GU D D, SHEN Y F, PAN Y F, et al. Study on direct metal laser sintering forming mechanism[J]. Journal of Materials Engineering, 2004, 5(1): 42-48(in Chinese).

[4] ZHONG M L, YANG L, LIU W J, et al. Laser direct manufacturing of alloy W/Ni space telescope collimator[J]. Chinese Journal of Lasers, 2004, 31(4): 482-486(in Chinese).

[5] MING X L, CHEN J, TAN H, et al. Coarsening behavior of gamma phase in GH4169 superalloy fabricated by laser solid forming[J]. Journal of Materials Engineering, 2014, 15(8):8-14(in Chinese).

[6] LIU F Ch, LIN X, YU X B, et al. Evolution of interface and crystal orientation of laser solid formed GH4169 superalloy during recrystallization[J]. Acta Metallurgica Sinica, 2014, 50(4): 463-470(in Chinese).

[7] QIAN Y H, TAN H, LI J, et al. Microstructure characterization of laser solid forming Ti-6Al-4V alloy by high power[J]. Rare Metal Materials and Engineering, 2014, 43(9): 2162-2166(in Chinese).

[8] YANG J Q, CHEN J, ZHAO W Q, et al. Study on the rate of crack propagation of laser solid forming of TC11DT titanium alloy[J]. Applied Laser, 2014,34(4):277-282（in Chinese）.

[9] LI J, LIN X, QIAN Y H, et al. Study on microstructures and mechanical properties of TC4 titanium alloy by laser solid forming[J]. Chinese Journal of Lasers, 2014,41(11):29-33（in Chinese）.

[10] CHEN J, ZHANG R, ZHANG Q, et al. Influence of laser solid forming Ti60 alloy microstructure and defects on the performance[J]. Rare Metal Materials and Engineering, 2014, 43(3): 548-552（in Chinese）.

[11] ZHANG X H, LIN X, CHEN J, et al. Effect of heat treatment on Microstructure and mechanical properties of TA15 alloy by laser solid forming[J]. Rare Metal Materials and Engineering,2011,40(1):142-147（in Chinese）.

[12] ZHAO W Q, CHEN J, YANG J Q, et al. Influence of laser solid forming process on microstructure and mechanical properties of TC11 titanium alloy[J]. Applied Laser, 2012,32（6）:479-483（in Chinese）.

[13] ZHANG Q, CHEN J, HAN Ch X, et al. Laser repair heat affected zone depth on tensile properties of TC17-TC11 dual alloy[J]. Applied Laser, 2012,32（4）:267-271（in Chinese）.

[14] YANG H O, SONG M H, YANG D H, et al. The evolution of laser solid forming of 300M ultra high strength steel organization[J]. Applied Laser, 2011,5（4）:32-37（in Chinese）.

[15] WU X Y, LIN X, L X W, et al. Research on the microstructure and properties of 17-4 PH stainless steel by laser solid forming[J]. Chinese Journal of Lasers, 2011,38(2):37-42（in Chinese）.

[16] SUN Y Y, HUANG W. Progress of the application of selective laser processing technology in the field of oral medicine[J]. Journal of Dental Prevention and Treatment, 2014,22(2):109-112（in Chinese）.

[17] WANG Y, LI Y. Application and analysis of biological toxicity of Ti Zr alloy in oral repair[J]. Guide of China Medicine, 2012,10(12):234-235（in Chinese）.

[18] YAN X D. Study on preparation and properties of Ti Zr alloy laser solid forming powder for dental restoration[D]. Xi’an： The Fourth Military Medical University, 2005：6-8（in Chinese）.

[19] LI J M, WANG Ch M,YAN F, et al. Study on microstructure and mechanical properties of 6005A joint in laser-MIG hybrid welding[J]. Laser Technology,2014,38(6):733-737（in Chinese）.

[20] ZHANG M K, SUN G F, ZHANG W, et al. Study on corrosion property of laser surface alloyed Cr-CrB2 layers on stainless steel[J]. Laser Technology,2014,38(2):240-245（in Chinese）.

[21] HUANG W D. Laser solid forming[M]. Xi’an: Northwestern Polytechnical University Press,2007:16（in Chinese）.