脉冲大电流系统空芯变压器设计

设计了一种变流用的带绕式空芯变压器，分析了变压器的工作原理并详细介绍了其制作过程。该变压器主要由引线、绝缘膜、铜带和内绝缘筒组成。在电容器充电电压为2500 V的条件下，实验得到该变压器原副边电流峰值分别为5.52 kA和1.48 kA，电流上升率分别为37 A/μs和138 A/μs。理论分析和实验结果表明:该变压器可以有效降低脉冲功率电路对开关电流上升率的要求，从而将重复频率和稳定性能更好的晶闸管应用于脉冲大电流系统，可以大大提高系统的放电频率和寿命。

Abstract

In this paper, a strip air-core pulse transformer is designed to convert the current. And, how it works and the process of making iselaborated in detail. The transformer contains leads, insulator, copper strip and supporting core. Under the conditions of the charging voltage 2500 V, 5.52 kA and 1.48 kA peak current of primary and secondary windings are obtained, and correspondingly, the current rising rate is 37 A/μs and 138 A/μs. It is supported by analysis and experiment that the transformer can reduce the requirement of the rising rate of the switching current effectively. So, the thyristor can be used in the pulse current system which has a high current rising rate and improve its performance on repetition and stability.

参考文献

[1] 韩旻，邹晓兵，张贵新. 脉冲功率技术基础［M］. 北京：清华大学出版社，2010:71-83. (Han Min, Zou Xiaobing, Zhang Guixin. Foundation of pulse power technology. Beijing: Tsinghua University Press, 2010:71-83)

[2] 李正瀛. 脉冲功率技术［M］. 北京：水利电力出版社，1992:49-76. (Li Zhengying. Pulse power technology. Beijing: Water Resources and Electric Power Press, 1992:49-76)

[3] 李名加，辛佳琪，康强，等. 800 kV高变比螺旋线型空芯变压器的研制［J］. 强激光与粒子束，2011，23(3):841-844. (Li Mingjia, Xin Jiaqi, Kang Qiang, et al. Development of 800 kV spiral air-cored transformer with high turn ratio. High Power Laser and Particle Beams, 2011,23(3):841-844)

[4] Cliffe R J, Smith I R, Brown J. Interfacing transformer for a pulsed load current exceeding 1 MA［J］. J Phys D: Appl Phys, 2003,36:1651-1654.

[5] 刘金亮，张建德，李永忠, 等. 一种给脉冲形成线充电的带绕式高压脉冲变压器［J］. 强激光与粒子束，2003，15(4):394-396. (Liu Jinliang, Zhang Jiande, Li Yongzhong, et al. High voltage pulse transformer for PFL charging. High Power Laser and Particle Beams, 2003, 15(4):394-396)

[6] James P O. Air-core pulse transformer design［C］//Power Modulator Symposium. 1988:325-330.

[7] Kim S C, Heo H, Park S S, et al. Development of an air-core cylindrical HV pulse transformer［C］//Proceedings of the 27th International Power Modulator Symposium and 2006 High Voltage Workshop. 2006.

[8] Ko S T, Nam S H. Field enhancement optimization of an air-cored spiral strip pulse transformer［J］. IEEE Trans on Plasma Science, 2005,33(4):1268-1272.

[9] 辛佳祺，李名加，康强.空芯脉冲变压器锥形绕组电压分布［J］. 强激光与粒子束，2009,21(2):311-315. (Xin Jiaqi, Li Mingjia, Kang Qiang. Pulse voltage distribution on taper winding of air-core pulse transformer. High Power Laser and Particle Beams, 2009,21(2):311-315)常安碧，张德泉，张之福, 等. 600 kV高压大电流脉冲变压器的研制［J］. 强激光与粒子束，1997，10(3):462-466. (Chang Anbi, Zhang Dequan, Zhang Zhifu, et al. Development of a 600 kV high voltage current pulse power transformer. High Power Laser and Particle Beams, 1997,10(3):462-466)

[10] 曹云东，杨帆. 一种带绕式空芯脉冲变压器电感的简便算法［J］. 沈阳工业大学学报，2008，30(16):601-604. (Cao Yundong, Yang Fan. A simple algorithm for inductance of strip air-core pulse transformer. Journal of Shenyang University of Technology, 2008,30(16):601-604)

[11] Lindblom A, Isberg J, Bernhoff H. Calculating the coupling factor in a multilayer coaxial transformer with air-core［J］. IEEE Trans on Magnetics, 2004,40(5):3244-3248.

[12] 张文芹，曹双宝，董瑞芳. 高精度变压器铜带的边部处理技术［J］. 有色金属加工，2008,37(2):20-23. (Zhang Wenqin, Cao Shuangbao, Dong Ruifang. Edge trimming technology of high precise copper strip for transformer. Nonferrous Metals Processing, 2008,37(2):20-23)

[13] Resinlab L C C. Two Parts Electrically Conductive Flexible Epoxy Adhesive Technical Datasheet［Z］. SEC 1233.

李兴群, 张明, 刘明海, 常江, 邓珊, 邱胜顺. 脉冲大电流系统空芯变压器设计[J]. 强激光与粒子束, 2012, 24(9): 2245. Li Xingqun, Zhang Ming, Liu Minghai, Chang Jiang, Deng Shan, Qiu Shengshun. Design of air-core transformer for pulsed current system[J]. High Power Laser and Particle Beams, 2012, 24(9): 2245.

脉冲大电流系统空芯变压器设计

关于本站 Cookie 的使用提示

全站搜索

脉冲大电流系统空芯变压器设计

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索