[1] 张 雏, 沈洪斌, 周 冰, 等. 激光测距机最大测程评估方法研究[J]. 激光与红外, 2008, 38(12): 1196-1198.

    Zhang Chu, Shen Hongbin, Zhou Bing, et al. Study on evaluating maximum range of laser range finder[J]. Laser & Infrared, 2008, 38(12): 1196-1198.

[2] 张 雏, 沈洪斌, 徐春梅, 等. 测距激光的能量分布及其对光轴校正的影响[J]. 激光与红外, 2008, 38(10): 971-973.

    Zhang Chu, Shen Hongbin, Xu Chunmei, et al. Energy distribution of ranging laser and effect on the correction of optical axis[J]. Laser & Infrared, 2008, 38(10): 971-973.

[3] 骆新新, 刘秉琦, 孙东平, 等. 基于CCD的激光测距机光轴平行性检测[J]. 半导体光电, 2009, 30(3): 460-463.

    Luo Xinxin, Liu Bingqi, Sun Dongping, et al. Opto-axes parallelism detection method for laser-range-finder based on CCD[J]. Semiconductor Optoelectronics, 2009, 30(3): 460-463.

[4] 刘秉琦, 刘国平, 张 雏, 等. 一种激光测距机光轴平行性智能检校方法[J]. 半导体光电, 2012, 33(3): 434-436, 440.

    Liu Bingqi, Liu Guoping, Zhang Chu, et al. Intelligent method for parallelism calibration of three-optic-axes of laser range finder[J]. Semiconductor Optoelectronics, 2012, 33(3): 434-436, 440.

[5] 张 勇, 冯广斌, 陈志斌. 脉冲激光测距机光轴平行性的自动检测研究[J]. 激光与红外, 2005, 35(4): 228-230.

    Zhang Yong, Feng Guangbin, Chen Zhibin. The study of automatic testing on alignment of optical axes for impulse laser range finder[J]. Laser & Infrared, 2005, 35(4): 228-230.

[6] 陈志斌, 刘羽翔, 薛明晰, 等. 点阵式上转换片在激光光斑采集中的应用研究[J]. 应用光学, 2011, 32(6): 1139-1144.

    Chen Zhibin, Liu Yuxiang, Xue Mingxi, et al. Laser spot acquisition by lattice up-conversion board[J]. J. of Appl. Opt., 2011, 32(6): 1139-1144.

[7] 李松明, 徐荣甫, 赵长明. 智能激光测距机性能测试系统[J]. 红外与激光工程, 2001, 30(4): 211-213.

    Li Songming, Xu Rongfu, Zhao Changming. Intelligent measuring system for performance-parameters of laser range finder[J]. Infrared and Laser Engin., 2001, 30(4): 211-213.

[8] 谷口庆治. 数宇图像处理[M]. 北京: 科学出版社, 2002: 80-85.

    Gukou Qingzhi. Digital Image Processing[M]. Beijing: Science Press, 2002: 80-85.

[9] 李 刚. 光学仪器性能数字化检测[D]. 石家庄: 军械工程学院, 2000: 11-13.

    Li Gang. Digital detection on properties of optical devices[D]. Shijiazhuang: Ordnance Engin. College, 2000: 11-13.