[1] Allan A. International technology roadmap for semiconductors (ITRS)[J]. Journal of Applied Physics, 2015, 86(17): 045406.

[2] Khan H N, Hounshell D A, Fuchs E R H. Science and research policy at the end of Moore's law[J]. Nature Electronics, 2018, 1(1): 14-21.

[3] Waldrop M M. The chips are down for Moore's law[J]. Nature, 2016, 530(7589): 144-147.

[4] 吴雪峰, 尹海亮, 李强. 飞秒激光加工碳纳米管薄膜试验研究[J]. 中国激光, 2019, 46(9): 0902002.

    Wu X F, Yin H L, Li Q. Femtosecond laser processing of carbon nanotubes film[J]. Chinese Journal of Lasers, 2019, 46(9): 0902002.

[5] Hills G, Lau C, Wright A, et al. Modern microprocessor built from complementary carbon nanotube transistors[J]. Nature, 2019, 572(7771): 595-602.

[6] Franklin A D, Luisier M, Han S J, et al. Sub-10 nm carbon nanotube transistor[J]. Nano Letters, 2012, 12(2): 758-762.

[7] 杨立军, 崔健磊, 王扬, 等. 碳纳米管互连技术新进展[J]. 新型炭材料, 2016, 31(1): 1-17.

    Yang L J, Cui J L, Wang Y, et al. Research progress on the interconnection of carbon nanotubes[J]. New Carbon Materials, 2016, 31(1): 1-17.

[8] Avouris P, Chen Z H, Perebeinos V. Carbon-based electronics[J]. Nature Nanotechnology, 2007, 2(10): 605-615.

[9] Cui J L, Mei H H, Zhang J W, et al. Interfacial contact behavior between CNTs and AgNW with molecular dynamics simulation[J]. Materials, 2020, 13(6): 1290-1296.

[10] Chen MX, Song X H, Liu S, et al. Batch welding of aligned carbon nanotube onto metal electrodes[J]. Microsystem Technologies, 2012, 18(6): 679-682.

[11] Cao Q, Han S J, Tersoff J, et al. End-bonded contacts for carbon nanotube transistors with low, size-independent resistance[J]. Science, 2015, 350(6256): 68-72.

[12] Santini C A, Volodin A, van Haesendonck C, et al. Carbon nanotube-carbon nanotube contacts as an alternative towards low resistance horizontal interconnects[J]. Carbon, 2011, 49(12): 4004-4012.

[13] Liebau M, Unger E, Duesberg G S, et al. Contact improvement of carbon nanotubes via electroless nickel deposition[J]. Applied Physics A, 2003, 77(6): 731-734.

[14] Woo Y, Duesberg G S, Roth S. Reduced contact resistance between an individual single-walled carbon nanotube and a metal electrode by a local point annealing[J]. Nanotechnology, 2007, 18(9): 095203.

[15] Karita M, Asaka K, Nakahara H, et al. In situ TEM study on the improvement of contact resistance between a carbon nanotube and metal electrodes by local melting[J]. Surface and Interface Analysis, 2012, 44(6): 674-677.

[16] Karita M, Asaka K, Nakahara H, et al. In situ TEM study on changes in structure and electrical conductance of carbon nanotube-gold contact induced by local joule heating[J]. Journal of Materials Science, 2013, 48(2): 936-940.

[17] Chen CX, Yan L J, Kong E S W, et al. Ultrasonic nanowelding of carbon nanotubes to metal electrodes[J]. Nanotechnology, 2006, 17(9): 2192-2197.

[18] Zhao B, Wang Y F, Zhang Y F. Decrease of contact resistance at the interface of carbon nanotube/electrode by nanowelding[J]. Electronic Materials Letters, 2017, 13(2): 168-173.

[19] Bachtold A, Henny M, Terrier C, et al. Contacting carbon nanotubes selectively with low-ohmic contacts for four-probe electric measurements[J]. Applied Physics Letters, 1998, 73(2): 274-276.

[20] Wei B Q, Vajtai R, Ajayan P M. Reliability and current carrying capacity of carbon nanotubes[J]. Applied Physics Letters, 2001, 79(8): 1172-1174.

[21] Rykaczewski K, Henry M R, Kim S K, et al. The effect of the geometry and material properties of a carbon joint produced by electron beam induced deposition on the electrical resistance of a multiwalled carbon nanotube-to-metal contact interface[J]. Nanotechnology, 2010, 21(3): 035202.

[22] Kim S, Kulkarni D D, Rykaczewski K, et al. Fabrication of an UltraLow-resistance ohmic contact to MWCNT-metal interconnect using graphitic carbon by electron beam-induced deposition (EBID)[J]. IEEE Transactions on Nanotechnology, 2012, 11(6): 1223-1230.

[23] Madsen D N, Moølhave K, Mateiu R, et al. Soldering of nanotubes onto microelectrodes[J]. Nano Letters, 2003, 3(1): 47-49.

[24] Yu M. Strength andbreaking mechanism of multiwalled carbon nanotubes under tensile load[J]. Science, 2000, 287(5453): 637-640.

[25] 杨建军. 飞秒激光超精细“冷”加工技术及其应用(I)[J]. 激光与光电子学进展, 2004, 41(3): 42-52, 57.

    Yang J J. Femtosecond laser “cold” micro-machining and its advanced applications[J]. Laser & Optronics Progress, 2004, 41(3): 42-52, 57.

[26] Banhart F. Interactions between metals and carbon nanotubes:at the interface between old and new materials[J]. Nanoscale, 2009, 1(2): 201.

[27] Ciraci S, Dag S, Yildirim T, et al. Functionalized carbon nanotubes and device applications[J]. Journal of Physics: Condensed Matter, 2004, 16(29): R901-R960.

[28] Park S, Srivastava D, Cho K. Generalized chemical reactivity of curved surfaces: carbon nanotubes[J]. Nano Letters, 2003, 3(9): 1273-1277.

[29] Menon M, Andriotis A N, Froudakis G E. Curvature dependence of the metal catalyst atom interaction with carbon nanotubes walls[J]. Chemical Physics Letters, 2000, 320(5/6): 425-434.

[30] Matsuda Y, Deng W Q, Goddard W A. Contact resistance properties between nanotubes and various metals from quantum mechanics[J]. The Journal of Physical Chemistry C, 2007, 111(29): 11113-11116.

[31] Maiti A, Ricca A. Metal-nanotube interactions: binding energies and wetting properties[J]. Chemical Physics Letters, 2004, 395(1/2/3): 7-11.

[32] Song X H, Liu S, Yan H, et al. First-principles study on effects of mechanical deformation on outer surface reactivity of carbon nanotubes[J]. Physica E: Low-Dimensional Systems and Nanostructures, 2009, 41(4): 626-630.

[33] Zhang Y, Franklin N W, Chen R J, et al. Metal coating on suspended carbon nanotubes and its implication to metal-tube interaction[J]. Chemical Physics Letters, 2000, 331(1): 35-41.