基于单激光束旋转的深孔直线度测量方法
刘新波, 王仲, 林立, 王龙. 基于单激光束旋转的深孔直线度测量方法[J]. 激光与光电子学进展, 2017, 54(3): 031203.
Liu Xinbo, Wang Zhong, Lin Li, Wang Long. Measuring Method for Deep Hole Straightness Based on Single Laser Beam Rotation[J]. Laser & Optoelectronics Progress, 2017, 54(3): 031203.
[1] 李 言, 孔令飞. 振动切削深孔加工初始偏差对孔直线度误差的影响[J]. 机械工程学报, 2012, 48(13): 167-173.
Li Yan, Kong Lingfei. Influence of initial deviation in vibrating deep hole drilling on hole straightness error[J]. Journal of Mechanical Engineering, 2012, 48(13): 167-173.
[2] 刘战锋, 宁延平, 刘雁蜀. 精密深孔直线度测量技术的现状与发展[J]. 新技术新工艺, 2004, 24(11): 36-39.
Liu Zhanfeng, Ning Yanping, Liu Yanshu, et al. Present condition and development on linearity measure technique for exactitude deep hole[J]. New Technology & New Process, 2004, 24(11): 36-39.
[3] 陈振亚, 沈兴全, 庞俊忠, 等. 深孔直线度光电测量技术[J]. 农业机械学报, 2014, 45(12): 362-366.
Chen Zhenya, Shen Xingquan, Pang Junzhong, et al. Photoelectric measurement method of deep hole straightness[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(12): 362-366.
[4] Schalk R, Ofner R, Oleary P. Pipe eccentricity measurement using laster triangulation[J]. Image and Vision Computing, 2007, 25(7): 194-196.
[5] 郝永鹏, 于大国, 李少敏, 等. 基于光视觉技术的深孔直线度检测系统[J]. 组合机床与自动化加工技术, 2016, 58(2): 51-53.
Hao Yongpeng, Yu Daguo, Li Shaomin, et al. Linearity detecting system for deep holes based on the light vision technology[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2016, 58(2): 51-53.
[6] 孟晓华. 深孔直线度误差检测模型与方法的理论研究[D]. 太原: 中北大学, 2014: 1-10.
Meng Xiaohua. Theoretical research on model &methods of deep-hole straightness detection[D]. Taiyuan: North University of China, 2014: 1-10.
[7] 刘新波, 王 仲, 苏 野, 等. 基于逼近式定心法测量机床回转轴对导轨的平行度[J]. 中国激光, 2012, 39(11): 1108105.
Liu Xinbo, Wang Zhong, Su Ye, et al. Measurement of parallelism between rotating axis and guideway of a machine tool based on approximation hole center positioning[J]. Chinese J Lasers, 2012, 39(11): 1108105.
[8] 刘新波, 王 仲, 罗庆跃, 等. 基于单激光束旋转的圆孔直径在机测量方法[J]. 激光与光电子学进展, 2016, 53(4): 041204.
[9] 王国辉, 侯新忠. 基于PSD器件的深孔直线度检测设计研究[J]. 装甲兵工程学院学报, 2004,18(4): 65-68.
Wang Guohui, Hou Xinzhong. Design of testing linearity decision in deep hole based on PSD[J]. Journal of Academy of Armored Force Engineering, 2004, 18(4): 65-68.
[10] 徐光明, 刘军强, 高晓兵, 等. 深孔加工中孔轴线偏斜的实时测量及误差分析[J]. 西安工业大学学报, 2016, 36(4): 300-303.
Xu Guangming, Liu Junqiang, Gao Xiaobing, et al. Real-time measurement of axis deflection in deep hole machining and error analysis[J]. Journal of Xi′an Technological University, 2016, 36(4): 300-303.
[11] 罗 钧, 麻锦侠, 刘学明, 等. 三维坐标点集的轴线直线度高精度快速评定[J]. 上海交通大学学报, 2016, 50(5): 730-735.
Luo Jun, Ma Jinxia, Liu Xueming, et al. High-precision and fast evaluation of spatial straightness error of 3D coordinate point set[J]. Journal of Shanghai Jiao Tong University, 2016, 50(5): 730-735.
[12] 邓丽媛. 三坐标测量机在GEVO16型柴油机机体测量中的应用研究[D]. 上海: 上海交通大学, 2011: 9-16.
Deng Liyuan. Coordinate measure machine apply in measure of diesel engine frame[D]. Shanghai: Shanghai Jiao Tong University, 2011: 9-16.
[13] 吴振刚, 曾周末, 李兴强, 等. 非接触回转射线二面角在机测量方法[J]. 中国激光, 2016, 43(5): 0508001.
刘新波, 王仲, 林立, 王龙. 基于单激光束旋转的深孔直线度测量方法[J]. 激光与光电子学进展, 2017, 54(3): 031203. Liu Xinbo, Wang Zhong, Lin Li, Wang Long. Measuring Method for Deep Hole Straightness Based on Single Laser Beam Rotation[J]. Laser & Optoelectronics Progress, 2017, 54(3): 031203.