[1] 李 言, 孔令飞. 振动切削深孔加工初始偏差对孔直线度误差的影响［J］. 机械工程学报, 2012, 48(13): 167-173.

    Li Yan, Kong Lingfei. Influence of initial deviation in vibrating deep hole drilling on hole straightness error［J］. Journal of Mechanical Engineering, 2012, 48(13): 167-173.

[2] 刘战锋, 宁延平, 刘雁蜀. 精密深孔直线度测量技术的现状与发展［J］. 新技术新工艺, 2004, 24(11): 36-39.

    Liu Zhanfeng, Ning Yanping, Liu Yanshu, et al. Present condition and development on linearity measure technique for exactitude deep hole［J］. New Technology & New Process, 2004, 24(11): 36-39.

[3] 陈振亚, 沈兴全, 庞俊忠, 等. 深孔直线度光电测量技术［J］. 农业机械学报, 2014, 45(12): 362-366.

    Chen Zhenya, Shen Xingquan, Pang Junzhong, et al. Photoelectric measurement method of deep hole straightness［J］. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(12): 362-366.

[4] Schalk R, Ofner R, Oleary P. Pipe eccentricity measurement using laster triangulation［J］. Image and Vision Computing, 2007, 25(7): 194-196.

[5] 郝永鹏, 于大国, 李少敏, 等. 基于光视觉技术的深孔直线度检测系统［J］. 组合机床与自动化加工技术, 2016, 58(2): 51-53.

    Hao Yongpeng, Yu Daguo, Li Shaomin, et al. Linearity detecting system for deep holes based on the light vision technology［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2016, 58(2): 51-53.

[6] 孟晓华. 深孔直线度误差检测模型与方法的理论研究［D］. 太原: 中北大学, 2014: 1-10.

    Meng Xiaohua. Theoretical research on model &methods of deep-hole straightness detection［D］. Taiyuan: North University of China, 2014: 1-10.

[7] 刘新波, 王 仲, 苏 野, 等. 基于逼近式定心法测量机床回转轴对导轨的平行度［J］. 中国激光, 2012, 39(11): 1108105.

    Liu Xinbo, Wang Zhong, Su Ye, et al. Measurement of parallelism between rotating axis and guideway of a machine tool based on approximation hole center positioning［J］. Chinese J Lasers, 2012, 39(11): 1108105.

[8] 刘新波, 王 仲, 罗庆跃, 等. 基于单激光束旋转的圆孔直径在机测量方法［J］. 激光与光电子学进展, 2016, 53(4): 041204.

    Liu Xinbo, Wang Zhong, Luo Qingyue, et al. A hole diameter measurement model on machine based on single laser beam rotation［J］. Laser & Optoelectronics Progress, 2016, 53(4): 041204.

[9] 王国辉, 侯新忠. 基于PSD器件的深孔直线度检测设计研究［J］. 装甲兵工程学院学报, 2004,18(4): 65-68.

    Wang Guohui, Hou Xinzhong. Design of testing linearity decision in deep hole based on PSD［J］. Journal of Academy of Armored Force Engineering, 2004, 18(4): 65-68.

[10] 徐光明, 刘军强, 高晓兵, 等. 深孔加工中孔轴线偏斜的实时测量及误差分析［J］. 西安工业大学学报, 2016, 36(4): 300-303.

    Xu Guangming, Liu Junqiang, Gao Xiaobing, et al. Real-time measurement of axis deflection in deep hole machining and error analysis［J］. Journal of Xi′an Technological University, 2016, 36(4): 300-303.

[11] 罗 钧, 麻锦侠, 刘学明, 等. 三维坐标点集的轴线直线度高精度快速评定［J］. 上海交通大学学报, 2016, 50(5): 730-735.

    Luo Jun, Ma Jinxia, Liu Xueming, et al. High-precision and fast evaluation of spatial straightness error of 3D coordinate point set［J］. Journal of Shanghai Jiao Tong University, 2016, 50(5): 730-735.

[12] 邓丽媛. 三坐标测量机在GEVO16型柴油机机体测量中的应用研究［D］. 上海: 上海交通大学, 2011: 9-16.

    Deng Liyuan. Coordinate measure machine apply in measure of diesel engine frame［D］. Shanghai: Shanghai Jiao Tong University, 2011: 9-16.

[13] 吴振刚, 曾周末, 李兴强, 等. 非接触回转射线二面角在机测量方法［J］. 中国激光, 2016, 43(5): 0508001.

    Wu Zhenggang, Zeng Zhoumo, Li Xingqiang, et al. Non-contact on- machine dihedral angle measurement approach based on rotary ray-scanning mechanism［J］. Chinese J Lasers, 2016, 43(5): 0508001.