夹持方式对频率转换KDP晶体面形的影响

针对惯性约束聚变(ICF)系统中大口径超薄KDP晶体在不同夹持和不同姿态下的面形变化，采用有限元分析软件ANSYS，建立了大口径超薄KDP晶体在不同夹持和不同姿态下的应变模型及其边界条件的确定方法，计算了四周简支正面点力、四周固支正面压条、四周简支侧面点力、四周固支侧面压条4种夹持方式在30°和垂直姿态下大口径超薄KDP晶体的面形变化，并给出了面形变化的P-V值和RMS值。在此基础上，通过对不同夹持和不同姿态下KDP晶体面形变化的分析和比较，给出了四周固支正面压条是引起晶体面形变化相对较小的夹持方式的结论。

Abstract

Considering the deformations of surface profiles of the KDP crystals with large dimension and low thickness under different clamps and departure angles from the horizontal plane in inertial confined fusion(ICF) systems, which influenced by clamps and departure angles, a finite element analysis model for the KDP crystals with large dimension and low thickness under different clamps and departure angles has been built and the boundary condition determination has been presented. For the case of departure angles from the horizontal plane of 30°and 90°, respectively, the deformations of the surface profiles under different clamps, such as full periphery simple supported and point force on the front, full periphery clamped and compliant strip on the front, full periphery simple supported and point force on the side, as well as full periphery simple supported and compliant strip on the side of KDP crystals have been simulated and P-V and RMS values of the surface profiles have been given. Furthermore, the full periphery clamped and compliant strip on the front leading to the relatively small deformation of the surface has been given by the comparison and analysis of the deformations of the surface profiles of the KDP crystals under different clamps and departure angles.

参考文献

[1] 王富国,杨红波,杨飞,等.大口径主镜轴向支撑点位置优化分析［J］.红外与激光工程, 2007,36(6) : 877-880.(Wang Fuguo, Yang Hongbo, Yang Fei, et al.Optimization and analysis for the axis support points position of the large aperture mirrors.Infrared and Laser Engineering,2007,36(6): 877-880)

[2] 高明辉,杨近松,何斌.超薄反射镜支撑技术［J］.光学技术,2003,29(5): 611-613.(Gao Minghui, Yang Jinsong, He Bin. Support technique of ultra thin mirror.Optical Technique,2003,29(5): 611-613)

[3] Lubin O, Gouedard C. Modeling of the effects of KDP crystals gravity sag on third harmonic generation［C］//Proc of SPIE.1999，3492: 802-808.

[4] 罗祖道，李思简.各向异性材料力学［M］.上海: 上海交通大学出版社,1994: 195-200.(Luo Zudao, Li Sijian. Anisotropic material mechanics.Shanghai: Shanghai Jiaotong University Press,1994: 195-200)

[5] 王勖成,邵敏.有限单元基本原理和数值方法［M］.北京: 清华大学出版社,2006: 43-44.(Wang Xucheng, Shao Min. The basic principle of finite element and numerical methods.Beijing: Tsinghua University Press, 2006: 43-44)

[6] 俞铭华,吴剑国,曹骥，等.有限元法与面向对象编程［M］.北京: 科学出版社,2004: 80-85.(Yu Minghua, Wu Jianguo, Cao Ji, et al. Finite element method and object-oriented programming.Beijing: Science Press,2004: 80-85)

[7] Xu Qiao, Wang Jing. Analysis of the influence of vacuum chucking on the distortion of the KDP crystal［C］//Proc of SPIE.2000，4231: 464-468.

[8] Auerbach J M,Barker C E, Couture S A, et al.Modeling of frequency doubling and tripling with converter refractive index spatial non-uniformities due to gravitational sag［R］. UCRL-JC-130030,1998.

[9] Hibbard R L, Norton M A, Wegner P J. The design of precision mounts for optimizing the conversion efficiency of KDP crystals for the National Ignition Facility［R］.UCRL-JC130317,1998.

[10] English R E Jr, Hibbard R L, Michie R B, et al. Measuring parameters of large-aperture crystals used for generating optical hamonics［R］.UCRL-ID-133264,1999.

崔凯洪, 张彬, 贾凯, 徐攀, 熊召, 袁晓东. 夹持方式对频率转换KDP晶体面形的影响[J]. 强激光与粒子束, 2011, 23(6): 1538. Cui Kaihong, Zhang Bin, Jia Kai, Xu Pan, Xiong Zhao, Yuan Xiaodong. Effect of clamps on surface profiles of harmonic generation KDP crystals[J]. High Power Laser and Particle Beams, 2011, 23(6): 1538.

夹持方式对频率转换KDP晶体面形的影响

关于本站 Cookie 的使用提示

全站搜索

夹持方式对频率转换KDP晶体面形的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索