[1] 陶毓伽,淮秀兰,李志刚,等.大功率固体激光器冷却技术进展[J].激光杂志,2007,28(2):11-12.(Tao Yujia,Huai Xiulan,Li Zhigang,et al.Advancement of cooling techniques in high-power solid state laser.Laser Journal,2007,28(2):11-12)

[2] 田长青,徐洪波,曹宏章,等.高功率固体激光器冷却技术[J].中国激光,2009,36(7):1686-1692.(Tian Changqing,Xu Hongbo,Cao Hongzhang,et al.Cooling technology for high-power solid-state laser.Chinese Journal of Lasers,2009,36(7):1686-1692)

[3] 武德勇,高松信,曹宏章,等.高功率二极管激光器相变冷却技术[J].强激光与粒子束,2013,25(11):2799-2802.(Wu Deyong,Gao Songxin,Cao Hongzhang,et al.Phase transition cooling techniques for high power diode laser.High Power Laser and Particle Beams,2013,25(11):2799-2802)

[4] 杨波,高松信,刘军,等.高功率二极管激光器喷雾冷却实验研究[J].强激光与粒子束,2014,26:071001.(Yang Bo,Gao Songxin,Liu Jun,et al.Spray cooling of high power diode laser.High Power Laser and Particle Beams,2014,26:071001)

[5] Shedd T A.Next generation spray cooling:High heat flux management in compact spaces[J].Heat Transfer Engineering,2007,28(2):87-92.

[6] Pais M R,Chow L C,Mahefkey E T.Surface roughness and its effects on the heat transfer mechanism in spray cooling[J].Journal of Heat Transfer,1992,114(1):211-219.

[7] Grissom W M,Wierum F A.Liquid spray cooling of a heated surface[J].International Journal of Heat and Mass Transfer,1981,24(2):261-270.

[8] Pautsch A G.Heat transfer and film thickness characteristics of spray cooling with phase change[D].Madison:University of Wisconsin,2004.

[9] Hsieh C C.Two-phase transport phenomena in micro fluidic devices[D].Pittsburgh:Carnegie Mellon University,2003.

[10] Yang Jidong,Chow L,Pais M.Nucleate boiling heat transfer in spray cooling[J].Journal of Heat Transfer,1996,118:668-671.

[11] Rini D P,Chen R H,Chow L C.Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling[J].Journal of Heat Transfer,2002,124:63-72.

[12] Mesler R.Surface roughness and its effects on the heat transfer mechanism of spray cooling[J].Journal of Heat Transfer,1993,115:1083-1085.

[13] Yang J R,Wong S C.On the discrepancies between theoretical and experimental results for microgravity droplet evaporation[J].International Journal of Heat and Mass Transfer,2001,44(23):4433-4443.

[14] 徐洪波,钱春潮,邵双全,等.R600a喷雾冷却系统换热实验研究[J].光学学报,2014,34:s114010.(Xu Hongbo,Qian Chunchao,Shao Shuangquan,et al.Experimental research of R600a heat transfer performance in a closed spray cooling system.Acta Optica Sinica,2014,34:s114010)

[15] Cabrera E,Gonzalez J E.Heat flux correlation for spray cooling in the nucleate boiling regime[J].Experimental Heat Transfer,2003(16):19-44.

[16] Cooper M G.Saturation nucleate pool boiling-A simple correlation[C]//1st U.K.National Conference on Heat Transfer.1984:785-793.

[17] Ciofalo M,Caronia A,Liberto M D,et al.The Nukiyama curve in water spray cooling:Its derivation from temperature-time histories and its dependence on the quantities that characterize drop impact[J].International Journal of Heat and Mass Transfer,2007,50(25/26):4948-4966.

[18] Some T,Kim J,Lehmann E,et al.Pressure based prediction of spray cooling heat transfer coefficients[C]//International Mechanical Engineering Congress and Exposition.2007:1131-1138.

[19] Shedd T A,Pautsch A G.Spray impingement cooling with singles and multiple-nozzle arrays part Ⅱ:Visualization and empirical models[J].International Journal of Heat and Mass Transfer,2005,48(15):3176-3184.

[20] 王宏,余勇胜,朱恂,等.氨饱和压力对喷雾相变冷却特性的影响[J].中国激光,2011,38:0702004.(Wang Hong,Yu Yongsheng,Zhu Xun,et al.Effects saturation pressure on spray cooling with ammonia.Chinese Journal of Lasers,2011,38:0702004)