中国激光, 2007, 34 (3): 323, 网络出版: 2007-03-15   

弯曲直径对多模光纤激光器输出性能的影响

Influence of Bending Diameter on the Output Capability of Multimode Fiber Laser
作者单位
1 中国科学院上海光学精密机械研究所, 上海 201800
2 中国科学院研究生院, 北京 100039
3 烽火通信科技股份有限公司, 湖北 武汉 430079
摘要
大模场面积(LMA)多模光纤激光器的输出性能与光纤的弯曲程度有关。为研究两者之间的关系,在光纤不同弯曲直径下,对多模光纤激光器的输出性能进行了实验测量和理论计算。采用刀口法测量了不同弯曲直径下的激光光束质量因子M2,并对每种情况下光纤激光器的斜率效率进行了测量。光纤弯曲直径分别为285 mm,195 mm和130 mm时,多模光纤激光器光束质量因子M2为2.88,1.82和1.67,斜率效率为39%,35%和34%。另外,对于实验所采用的大模场面积多模光纤,理论计算了各模式损耗与光纤弯曲直径的关系。
Abstract
The output capability of large mode area (LMA) multimode fiber laser depends on the fiber bending. To study the relationship, the output capability of multimode fiber laser is measured under various bending diameters, and it also be calculated theoretically. Beam quality factor M2 is measured by the means of knife edge for different bending of LMA fiber and the slope efficiency is measured separately. When bending diameters of 285 mm, 195 mm and 130 mm are used, the corresponding beam quality factors are 2.88, 1.82 and 1.67 with the slope efficiencies of 39%, 35% and 34% respectively. For the LMA multimode fiber used in the experiment, losses of different modes are calculated theoretically under various bending diameters.
参考文献

[1] . . High-power ultrafast fiber laser systems[J]. IEEE J. Sel. Top. Quantum Electron., 2006, 12(2): 233-244.

[2] Dong Xue, Qihong Lou, Jun Zhou et al.. A 110-W fiber laser with homemade double-clad fiber [J]. Chin. Opt. Lett., 2005, 3(6):345~347

[3] Lou Qihong, Zhu Jianqiang, Zhou Jun et al.. 133 W pulsed high average power fiber amplifier with double clad fiber [J]. Chinese J. Lasers, 2005, 32(4):552
楼祺洪,朱健强,周军 等. 双包层光纤放大器获得133 W高平均功率脉冲激光输出[J]. 中国激光, 2005, 32(4):552

[4] . .133-W pulsed fiber amplifier with large-mode-area fiber[J]. Opt. Eng., 2006, 45(1): 010502-1.

[5] Zhou Jun, Lou Qihong, Zhu Jianqiang et al.. A continuous-wave 714W CW fiber laser with China-made large-mode-area double-clad fiber [J]. Acta Optica Sinica, 2006, 26(7):1119~1120
周军,楼祺洪,朱健强 等. 采用国产大模场面积双包层光纤的714 W连续光纤激光器[J]. 光学学报, 2006, 26(7):1119~1120

[6] . New technology advances applications for high-power fiber lasers[J]. Military & Aerospace Electronics, 2005, 16(7): 16-21.

[7] . Curvature loss formula for optical fibers[J]. J. Opt. Soc. Am., 1976, 66(3): 216-220.

[8] . Field deformation and loss caused by curvature of optical fibers[J]. J. Opt. Soc. Am., 1976, 66(4): 311-320.

[9] Lü Baida. Propagation and Control of High-Power Lasers [M]. Beijing: National Defence Industry Press, 1999. 64~70
吕百达. 强激光的传输与控制[M]. 北京:国防工业出版社, 1999. 64~70

李立波, 楼祺洪, 周军, 董景星, 魏运荣, 李进延. 弯曲直径对多模光纤激光器输出性能的影响[J]. 中国激光, 2007, 34(3): 323. 李立波, 楼祺洪, 周军, 董景星, 魏运荣, 李进延. Influence of Bending Diameter on the Output Capability of Multimode Fiber Laser[J]. Chinese Journal of Lasers, 2007, 34(3): 323.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!