正交直线扫描计算机分层成像研究 下载: 919次
田忠建, 余海军, 汪粼波, 皮真真, 刘丰林. 正交直线扫描计算机分层成像研究[J]. 光学学报, 2020, 40(22): 2211002.
Zhongjian Tian, Haijun Yu, Linbo Wang, Zhenzhen Pi, Fenglin Liu. Orthogonal Translation Computed Laminography[J]. Acta Optica Sinica, 2020, 40(22): 2211002.
[1] Zhang Y B, Yu H Y. Convolutional neural network based metal artifact reduction in X-ray computed tomography[J]. IEEE Transactions on Medical Imaging, 2018, 37(6): 1370-1381.
[2] Pechstein T. Industrielle röntgen-computer to mographie[J]. tm-Technisches Messen, 2020, 87(2): 79-80.
[3] O'Brien N S. Boardman R P, Sinclair I, et al. Recentadvances in X-ray cone-beam computed laminography[J]. Journal of X-Ray Science and Technology, 2016, 24(5): 691-707.
[4] 陈忠, 梁嘉辉, 张宪民. 板状构件X射线层析截面重建方法与实验[J]. CT理论与应用研究, 2014, 23(4): 579-589.
Chen Z, Liang J H, Zhang X M. Method and experiments on slice reconstruction of plate-like component based on X-ray laminography[J]. Computerized Tomography Theory and Applications, 2014, 23(4): 579-589.
[5] 邹晶, 曾伟, 胡晓东. 基于有限角和计算机层析成像相结合的板状构件成像方法[J]. 纳米技术与精密工程, 2017, 15(5): 366-371.
Zou J, Zeng W, Hu X D. New method based on combination of limited-angle and computed laminography imaging for plate-like objects[J]. Nanotechnology and Precision Engineering, 2017, 15(5): 366-371.
[6] 谢强. 计算机断层成像技术原理、设计、伪像和进展[M]. 张朝宗, 郭志平, 王贤刚, 等, 译. 北京: 科学出版社, 2006: 1.
HsiehJ. Computed tomography principle, design, artifacts, and recent advances[M]. Zhang C Z, Guo Z P, Wang X G, et al, Transl. Beijing: Science Press, 2006: 1.
[7] Plantes B G, Ziedses D. Eine neue methode zur differenzierung in der rontgenographie (planigraphies)[J]. Acta Radiologica, 1932, 13(2): 182-192.
[8] Blumensath T. O’Brien N, Wood C E. Calibration of robotic manipulator systems for cone-beam tomography imaging[J]. IEEE Transactions on Nuclear Science, 2018, 65(7): 1384-1393.
[9] Gao H, Zhang L, Chen Z, et al. Direct filtered-backprojection-type reconstruction from a straight-line trajectory[J]. Optical Engineering, 2007, 46(5): 057003.
[10] Hoshino M, Uesugi K, Takeuchi A, et al. Development of X-ray laminography under an X-ray microscopic condition[J]. The Review of Scientific Instruments, 2011, 82(7): 073706.
[11] Wood C E. O’Brien N, Denysov A, et al. Computed laminography of CFRP using an X-ray cone-beam and robotic sample manipulator systems[J]. IEEE Transactions on Nuclear Science, 2019, 66(3): 655-663.
[12] Voland V, Hoyer U, Auer R, et al. Defect recognition in crystalline silicon solar cells by X-ray tomosynthesis with layer resolution[J]. Progress in Photovoltaics: Research and Applications, 2015, 23(1): 124-130.
[13] Lewitt R M, Matej S. Overview of methods for image reconstruction from projections in emission computed tomography[J]. Proceedings of the IEEE, 2003, 91(10): 1588-1611.
[14] Wei Z H, Yuan L L, Liu B D, et al. A micro-CL system and its applications[J]. Review of Scientific Instruments, 2017, 88(11): 115107.
[15] Helfen L, Xu F, Schillinger B, et al. Neutron laminography: a novel approach to three-dimensional imaging of flat objects with neutrons[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2011, 651(1): 135-139.
[16] 王少宇, 伍伟文, 龚长城, 等. 相对平行直线扫描计算机分层成像研究[J]. 光学学报, 2018, 38(12): 1211002.
[17] Que J M, Cao D Q, Zhao W, et al. Computed laminography and reconstruction algorithm[J]. Chinese Physics C, 2012, 36(8): 777-783.
[18] Jimenez-Mendoza D. Espinosa-Arbelaez D G, Giraldo-Betancur A L, et al. Single X-ray transmission system for bone mineral density determination[J]. Review of Scientific Instruments, 2011, 82(12): 125105.
田忠建, 余海军, 汪粼波, 皮真真, 刘丰林. 正交直线扫描计算机分层成像研究[J]. 光学学报, 2020, 40(22): 2211002. Zhongjian Tian, Haijun Yu, Linbo Wang, Zhenzhen Pi, Fenglin Liu. Orthogonal Translation Computed Laminography[J]. Acta Optica Sinica, 2020, 40(22): 2211002.