激光冲击对AISI304不锈钢拉伸性能和摩擦磨损性能的影响
[1] 张群莉, 周明召, 陈智君 等. 镀锌钢-AISI 304不锈钢非熔透型激光叠焊工艺[J]. 中国激光, 2011, 38(6): 0603012
[2] G. Liu, S. C. Wang, X. F. Lou et al.. Low carbon steel with nanostructured surface layer induced by high-energy shot peening[J]. Scripta Materialia, 2001, 44(8-9): 1791~1795
[3] Ming Wen, Gang Liu, Jianfeng Gu et al.. The tensile properties of titanium processed by surface mechanical attrition treatment[J]. Surface & Coatings Technology, 2008, 202(19): 4728~4733
[4] Charles S. Montross, Tao Wei, Lin Ye et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International Journal of Fatigue, 2002, 24(10): 1021~1036
[5] L. Lu, S. X. Li, K. Lu. An abnormal strain rate effect on tensile behavior in nanocrystalline copper[J]. Scripta Materialia, 2001, 45(10): 1163~1169
[6] J. Z. Lu, K. Y. Luo, Y. K. Zhang et al.. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts[J]. Acta Materialia, 2010, 58(11): 3984~3994
[7] J. Z. Lu, K. Y. Luo, Y. K. Zhang et al.. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel[J]. Acta Materialia, 2010, 58(16): 5354~5362
[8] K. Kato. Wear in relation to friction: a review[J]. Wear, 2000, 241(2): 151~157
[9] J. Z. Lu, K. Y. Luo, F. Z. Dai et al.. Effects of multiple laser shock processing (LSP) impacts on mechanical properties and wear behaviors of AISI 8620 steel[J]. Materials Science and Engineering A, 2012, 536: 57~63
[10] 李晓春, 韦习成, Hua Meng. SUS 304奥氏体不锈钢的摩擦变形层研究[J]. 摩擦学学报, 2007, 27(4): 341~345
Li Xiaochun, Wei Xicheng, Hua Meng et al.. Friction-induced deformation layer of SUS 304 austenitic stainless steel[J]. Tribology, 2007, 27(4): 341~345
[11] 毕红运, 李诗卓, 姜晓霞. 不锈钢腐蚀磨损过程中形变强化能力的研究[J]. 摩擦学学报, 1998, 18(4): 327~331
Bi Hongyun, Li Shizhuo, Jiang Xiaoxia. The effect deformation strengthening on wear resistance of stainless steel in dry sliding and corrosive environment[J]. Tribology, 1998, 18(4): 327~331
[12] K. Y. Luo, J. Z. Lu, Y. K. Zhang et al.. Effects of laser shock processing on mechanical properties and micro-structure of ANSI304 austenitic stainless steel[J]. Materials Science and Engineering A, 2011, 528(13-14): 4783~4788
[13] X. H. Chen, L. Lu, K. Lu. Grain size dependence of tensile properties in ultrafine-grained Cu with nanoscale twins[J]. Scripta Materialia, 2011, 64(4): 311~314
[14] Y. S. Zhang, Z. Han, K. Wang. Friction and wear behaviors of nanocrystalline surface layer of pure copper[J]. Wear, 2006, 260(9-10): 942~948
[15] Meng Hua, Xicheng Wei, Jian Li. Friction and wear behavior of SUS 304 austenitic stainless steel against Al2O3 ceramic ball under relative high load[J]. Wear, 2008, 265: 799~810
[16] 李国宾, 关德林, 张明星. 表面纳米化中碳钢在干摩擦条件下的摩擦磨损性能研究[J]. 摩擦学学报, 2008, 28(1): 39~43
Li Guobin, Guan Delin, Zhang Minxing. Friction and wear properties of medium carbon steel by means of surface nanocrystallization in dry sliding[J]. Tribology, 2008, 28(1): 39~43
[17] Y. S. Zhang, K. Wang, Z. Han et al.. Dry sliding wear behavior of copper with nano-scaled twins[J]. Wear, 2007, 262(11-12): 1463~1470
[18] Jun Yang, Peiqing La, Weimin Liu et al.. Tribological properties of FeAl intermetallics under dry sliding[J]. Wear, 2004, 257(1-2): 104~109
[19] Z. B. Wang, N. R. Tao, S. Li et al.. Effect of surface nanocrystallization on friction and wear properties in low carbon steel[J]. Materials Science and Engineering A, 2003, 352(1-2): 144~149
[20] 刘阳, 吕晓仁, 刘刚 等. Q235钢高能喷丸纳米化表面的摩擦磨损行为[J]. 摩擦学学报, 2010, 30(5): 472~478
Liu Yang, Lü Xiaoren, Liu Gang et al.. Wear behaviors of nanocrystallization surface of Q235 steel by high energy peening[J]. Tribology, 2010, 30(5): 472~478
[21] 薛宗玉, 周升, 韦习成. 摩擦耦合变形条件下奥氏体不锈钢的摩擦学性能研究[J]. 摩擦学学报, 2009, 29(5): 405~411
Xue Zongyu, Zhou Sheng, Wei Xicheng. Tribological properties of austenitic stainless steel under the condition of friction coupling deformation[J]. Tribology, 2009, 29(5): 405~411
钟金杉, 鲁金忠, 罗开玉, 齐晗, 王志龙, 韩彬, 刘娟. 激光冲击对AISI304不锈钢拉伸性能和摩擦磨损性能的影响[J]. 中国激光, 2013, 40(5): 0503002. Zhong Jinshan, Lu Jinzhong, Luo Kaiyu, Qi Han, Wang Zhilong, Han Bin, Liu Juan. Influence of Laser Shock Processing on Tensile Properties and Tribological Behaviors of AISI304 Stainless Steel[J]. Chinese Journal of Lasers, 2013, 40(5): 0503002.