[1] 杨皓明, 王灵杰, 翁志成, 等. 大孔径大视场轻小型星敏感器光学系统［J］. 光学精密工程, 2007, 15(2): 151-154.

    YANG Hao-ming, WANG Ling-jie, WENG Zhi-cheng,et al. Optical system of light star tracker with wide field and large aperture［J］. Optical and Precision Engineering, 2007, 15(2): 151-154.

[2] 韩龙, 付强, 王超, 等. 大相对孔径宽光谱敏感器光学系统设计［J］. 激光与光电子学进展, 2016, 53(1): 199-202.

    HAN Long, FU Qiang, WANG Chao,et al. Design of optical system of star sensor with wide spectrum and large relative aperture［J］. Laser & Optoelectronics Progress, 2016, 53(1): 199-202.

[3] 闫佩佩, 樊学武. 大相对孔径甚高精度星敏感器光学系统设计［J］. 激光与光电子学进展, 2011, 48(9): 116-123.

    YAN Pei-pei, FAN Xue-wu. Design of optical system of very high precision star sensor with small F-number［J］.Laser & Optoelectronics Progress, 2011, 48(9): 116-123.

[4] 贺鹏举, 梁斌, 张涛, 等. 大视场星敏感器标定技术研究［J］. 光学学报, 2011, 31(10)：1-7.

    HE Peng-ju, LIANG Bin, ZHANG Tao, et al. Calibration method for wide field of view star sensor［J］. Acta Optica Sinica, 2011, 31(10)： 1-7.

[5] 吴峰, 沈为民. 折反式大视场星敏感器光学系统设计［J］. 光学技术, 2004, 30(2): 142-145.

    WU Feng, SHEN Wei-min. Design of a catadioptric system for star sensors with wide field of view［J］. Optical Technique, 2004, 30(2): 142-145.

[6] 郑月英, 钱唯德, 杜彦卫, 等. 一种基于大视场星敏感器的定姿方法［J］. 航天控制, 2008, 26(4): 40-42.

    ZHENG Yue-ying, QIAN Wei-de, DU Yan-wei, et al. An attitude determination method based on wide field of view star sensors［J］. Aerospace Control, 2008, 26(4): 40-42.

[7] WEI M S, XING F, YOU Z. A real-time detection and positioning method for small and weak targets using a 1D morphology-based approach in 2D images［J］.Light: Science & Applications, 2018, 75: 18006.

[8] ZHANG S, XING F, SUN T, et al. Novel approach to improve the attitude update rate of a star tracker［J］. Optics Express, 2018, 26(5): 5164-5181.

[9] SUN T, XING F, YOU Z. Optical system error analysis and calibration method of high-accuracy star trackers［J］.Sensors, 2013, 13(4): 4598-4623.

[10] 刘健, 郝云彩, 常军, 等. 无热化星敏感器光学系统设计［J］. 北京理工大学学报, 2010, 30(2): 223-225+230.

    LIU Jian, HAO Yun-cai, CHANG Jun,et al. Athermalization of star tracker system［J］. Transactions of Beijing Institute of Technology, 2010, 30(2): 223-225+230.

[11] 吕博, 刘伟奇, 张大亮, 等. 折反射式大入瞳星敏感器光学系统设计［J］. 中国激光, 2014, 41(7): 276-283.

    LV Bo, LIU Wei-qi, ZHANG Da-liang,et al. Optical system design of large entrance pupil catadioptric star sensor［J］. Chinese Journal of Lasers, 2014, 41(7): 276-283.

[12] 王红, 田铁印. 三线阵测绘相机光学系统的设计和公差分析［J］. 光学精密工程, 2011, 19(7): 1444-1450.

    WANG Hong, TIAN Tie-yin. Design of three line array mapping camera and its tolerance analysis［J］.Optical and Precision Engineering, 2011, 19(7): 1444-1450.

[13] 孙圆圆, 李艳秋, 曹振. 超大数值孔径极紫外光刻物镜的公差分析［J］. 激光与光电子学进展, 2015, 52(12): 221-227.

    SUN Yuan-yuan, LI Yan-qiu, CAO Zhen. Tolerance analysis of high-numerical aperture extreme ultraviolet lithographic objective［J］.Laser & Optoelectronics Progress, 2015, 52(12): 221-227.

[14] 邓枰湖, 林峰. 光学设计中降低公差灵敏度的方法［J］. 激光与光电子学进展, 2015, 52(11): 182-189.

    DENG Ping-hu, LIN Feng. Method of tolerance sensitivity reduction of optical design［J］.Laser & Optoelectronics Progress, 2015, 52(11): 182-189.

[15] 许伟才, 黄玮, 杨旺. 投影光刻物镜倍率的公差分析与补偿［J］. 光学学报, 2011, 31(11): 265-268.

    XU Wei-cai, HUANG Wei, YANG Wang. Magnification tolerancing and compensation for the lithographic projection lens［J］.Acta Optica Sinica, 2011, 31(11): 265-268.

[16] 栗孟娟, 廖志波, 王春雨. 小口径高精度折射式光学系统装调公差的分析与控制［J］. 应用光学, 2015, 36(2): 277-281.

    LI Meng-juan, LIAO Zhi-bo, WANG Chun-yu. Analysis and control on assemblage tolerance in small-aperture high-precision refractive optical system［J］.Journal of Applied Optics, 2015, 36(2): 277-281.

[17] 张远健, 唐勇, 王鹏, 等. 光学系统设计中降低公差灵敏度的方法［J］. 光电工程, 2011, 38(10): 127-133.

    ZHANG Yuan-jian, TANG Yong, WANG Peng,et al. Method of tolerance sensitivity reduction of optical system design［J］. Opto-Electronic Engineering, 2011, 38(10): 127-133.

[18] BATES R. Performance and tolerance sensitivity optimization of highly aspheric miniature camera lenses［C］. Optical System Alignment, Tolerancing, & Verification IV, Optical System Alignment, Tolerancing, and Verification IV, 2010.

[19] ISSHIKI M, SINCLAIR D, KANEKO S. Lens design: global optimization of both performance and tolerance sensitivity［C］. International Optical Design Conference, International Society for Optics and Photonics, 2006.

[20] CHENG Xue-min, WANG Yong-tian, HAO Qun. Study on tolerance sensitivity reduction in lens optimization［C］. SPIE, 2005, 5638: 36-42.

[21] 王之江. 光学设计理论基础［M］. 北京: 科学出版社. 1985.

    WANG Zhi-jiang. The theoretical basis of optical design［M］. Beijing: Science Press. 1985.

[22] 赵阳, 巩岩, 胡宜宁. 变焦距光学系统降低公差灵敏度的方法［J］. 光电工程, 2009, 36(7): 121-125.

    ZHAO Yang, GONG Yan, HU Yi-ning. Method of tolerance sensitivity reduction of zoom optical system［J］.Opto-Electronic Engineering, 2009, 36(7): 121-125.

[23] 郁道银, 谈恒英. 工程光学［M］. 北京: 机械工业出版社. 2011.

    YU Dao-yin, TAN Heng-ying. Engineering optics［M］. Beijing: China Machine Press. 2011.