光学学报, 2009, 29 (11): 3179, 网络出版: 2009-11-16   

基于工艺的连续相位板设计

Process-Based Design of Continuous Phase Plates
作者单位
成都精密光学工程研究中心,四川 成都 610041
摘要
为改善惯性约束聚变(ICF)系统中聚焦光束质量,降低元件的加工难度,建立了基于工艺的连续相位板(CPP)理论设计模型,并从初相选取、相位展开、滤波、焦斑频谱控制等多方面改进了传统的G -S算法,比较分析了传统设计方法和基于工艺设计方法设计的CPP的加工特性和焦斑性能。基于工艺设计的CPP面型光滑,其产生的焦斑顶部均方根(RMS)和能量利用率η分别从传统G -S的62.8%和98.0%改进到16.9%和98.6%,而且有效抑制了10-100 μm的频谱成分。结果表明,基于工艺的CPP设计方法能够较好满足现有工艺约束条件和物理需求。
Abstract
A theoretical design model for continuous phase plates (CPP) used in inertial confinement fusion is built to improve the focus beam quality and reduce the difficulty of CPP′s fabrication.Moreover,the traditional G-S algorithm is modified through choosing continuous initial phase,phase unwrapping,phase filtering and controlling the frequency spectrum of focal spot.The operational characteristic and the focal spot′s performance caused by the CPP designed by traditional G-S algorithm and modified G-S algorithm are analyzed comparatively.The surface designed by the modified method is smoother than the traditional G-S algorithm,and the root mean square (RMS) and capacity usage ratio of the focal spot caused by modified G-S algorithm are 16.9% and 98.6% respectively,which are all better than the traditional method′s 62.8% and 98.0%.The 10-100 μm modulations of focal spot are suppressed very well.It shows that the CPP designed by the modified method meets the process restriction and physical specifications very well.
参考文献

[1] P.Wegner,J.Auerbach,T.Biesiada et al..NIF final optics system:frequency conversion and beam conditioning [C].SPIE,2004,5341:180-189

[2] . Neauport,X.Ribeyre,J.Daurios et al..Design and optical characterization of a large continuous phase plate for laser integration line and laser megajoule facilities[J]. Appl.Opt., 2003, 42(13): 2377-2382.

[3] . N.Dixit,M.D.Feit,M.D.Perry et al..Designing fully continuous phase screens for tailoring focal-plane irradiance profiles[J]. Opt.Lett., 1996, 21(21): 1715-1717.

[4] . Lin ,T.J.Kessler,G.N.Lawrence.Design of continuous surface-relief phase plates by surface-based simulated annealing to achieve control of focal-plane irradiance[J]. Opt.Lett., 1996, 21(20): 1703-1705.

[5] J.A.Menapace,P.J.Davis,W.A.Steele et al..MRF applications:on the road to making large-aperture ultraviolet laser resistant continuous phase plates for high-power lasers[C].SPIE,2006,6403:64030N-1-12

[6] 陈波,王菡子,韦辉 等.用于惯性约束聚变束匀滑的完全连续相位板设计方法[J].光学学报,2001,21(4):480-484

    Chen Bo,Wang Hanzi,Wei Hui et al..Design of fully continuous phase plates for beam smoothing in ICF[J].Acta Optica Sinica,2001,21(4):480-484

[7] 李涛,付绍军,王 炜 等.一种用于均匀照明的衍射光学元件设计的混合算法[J].计算物理,2002,19(2):77-80

    Li Tao,Fu Shaojun,Wang Wei et al..A hybrid algorithm applied to the design of diffractive optical elements used in uniform illumination[J].Chinese J.Computational Physics,2002,19(2):77-80

[8] 张巍,舒方杰,张晓波 等.均匀照明用衍射光学器件的空间频域优化设计方法[J].中国激光,2007,34(10):1388-1392

    Zhang Wei,Shu Fangjie,Zhang Xiaobo et al..Spatial frequency spectrum optimization method for design of diffractive optical elements in uniform illumination[J].Chinese J.Lasers,2007,34(10):1388-1392

[9] 李平,马 驰,粟敬钦 等.时域和与空域结合实现光束匀滑的光谱优化分析[J].中国激光,2008,35(4):534-538

    Li Ping,Ma Chi,Su Jingqin et al..Analysis of laser optimized spectrum for smoothing the focused spot by temporal and special method[J].Chinese J.Lasers,2008,35(4):534-538

[10] 粟敬钦,温圣林,袁 静 等.采用非线性相位拟合法设计长焦深透镜[J].光学学报,2007,27(10):1842-1845

    Su Jingqin,Wen Shenglin,Yuan Jing et al..Long-focal-depth lens designed by nonlinear phase fitting method[J].Acta Optica Sinica,2007,27(10):1842-1845

[11] . R.Fienup.Phase retrieval algorithms:a comparison[J]. Appl.Opt., 1982, 21(15): 2758-2769.

[12] 谭峭峰,严瑛白,金国藩.光谱色散匀滑技术与衍射光学器件联用性能的空间频谱分析[J].光子学报,2006,35(9):1384-1387

    Tan Qiaofeng,Yan Yingbai,Jin Guofan.Spatial frequency analysis of beam smoothing performance realized by the diffractive optical element and the smoothing by spectral dispersion technique[J].Acta Photonica Sinica,2006,35(9):1384-1387

[13] . A.Schofield,Y.M.Zhu.Fast phase unwrapping algorithm for interferometric applications[J]. Opt.Lett., 2003, 28(14): 1194-1196.

温圣林, 许乔, 马平, 杨春林, 周礼书, 颜浩. 基于工艺的连续相位板设计[J]. 光学学报, 2009, 29(11): 3179. Wen Shenglin, Xu Qiao, Ma Ping, Yang Chunlin, Zhou Lishu, Yan Hao. Process-Based Design of Continuous Phase Plates[J]. Acta Optica Sinica, 2009, 29(11): 3179.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!