夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

惯性约束聚变频率转换系统中，大口径薄型KDP晶体的面形质量是影响频率转换效率能否达到设计要求的关键因素之一。针对45°放置状态下口径为400 mm×400 mm的三倍频KDP晶体，采用ANSYS有限元分析软件，建立了不同夹持方式和具有不同加工误差的KDP晶体模型和夹具模型，分析了加工误差对不同夹持方式下KDP晶体附加面形的影响，给出了不同加工误差和不同夹持情况下，KDP晶体附加面形的P-V值和RMS值。研究结果表明，夹持方式和加工误差是引起KDP晶体附加面形变化的重要因素，正面压条夹持方式即使在晶体和夹具存在加工误差时也可以较好地控制晶体的附加面形。

Abstract

In frequency conversion systems of inertial confinement fusion, surface quality of KDP crystals with large dimension and low thickness is one of the key factors influencing the frequency conversion efficiency. For the third harmonic generation KDP crystals with 400 mm×400 mm dimensions and with 45° departure angle from the horizontal plane, finite element models have been built up to analyze the effect of the fabrication errors on the additional surface variations of KDP crystals under different clamping modes, and the P-V and RMS values of the surface variations under different clamping modes and fabrication errors are given. The results show that the clamping modes and the fabrication errors are responsible for the additional surface variations, and the additional surface variation can be controlled by the clamping bars on the front even if the fabrication errors of KDP crystals and clamps exist.

参考文献

[1] 魏晓峰,张小明,隋展,等.大口径KDP晶体高效率倍频研究［J］.中国激光, 1990, 17(12):737-740.(Wei Xiaofeng, Zhang Xiaoming, Sui Zhan, et al. Research on efficient frequency doubling using a large aperture KDP crystal. Chinese Journal of Lasers, 1990,17(12):737-740)

[2] 苏建良,沈振军,秦新捷,等.大口径强激光倍频系统精密调整架的研制［J］.光学精密工程, 1999, 7(2):37-42.(Su Jianliang, Shen Zhenjun, Qin Xinjie, et al. The design and invention of precision mount for frequency-conversion scheme of large-aperture high-power laser. Optics and Precision Engineering, 1999, 7(2):37-42 )

[3] 黄小军,魏晓峰,彭翰生,等. 20 TW超短脉冲激光装置的研制［J］. 强激光与粒子束, 2003, 15(12):1991-1994.(Huang Xiaojun, Wei Xiaofeng, Peng Hansheng, et al. Design and characterization of 20 TW Ti: sapphire laser system. High Power Laser and Particle Beams, 2003, 15(12):1991-1994)

[4] Hibbard R L, Norton M A, Wegner P J. The design of precision mounts for optimizing the conversion efficiency of KDP crystals for the National Ignition Facility［R］. UCRL-JC-130317, 1998.

[5] Auerbach J M, Milam D, Barker C E, et al. Frequency conversion modeling［R］. UCRL- LR-105821-9604, 1996.

[6] Lubin O, Gouedard C. Modeling of the effects of KDP crystals gravity sag on third harmonic generation［C］//Proc of SPIE. 1999, 3492:802-808.

[7] 罗祖道，李思简.各向异性材料力学［M］.上海:上海交通大学出版社, 1994:195-200.(Luo Zudao, Li Sijian. Anisotropic mechanics of materials. Shanghai: Shanghai Jiao Tong University Press, 1994:195-200)

[8] 薛强.弹性力学［M］.北京:北京大学出版社, 2006:66-83.(Xue Qiang. Elasticity. Beijing: Peking University Press, 2006:66-83)

[9] 崔凯洪,张彬,贾凯,等.夹持方式对频率转换KDP晶体面形的影响［J］.强激光与粒子束, 2011, 23(6):1538-1542.(Cui Kaihong, Zhang Bin, Jia Kai, et al. Effect of clamps on surface profiles of harmonic generation KDP crystals. High Power Laser and Particle Beams, 2011, 23(6):1538-1542)

[10] 宁桂峰,满翠华.有限元接触分析应用研究［J］.现代制造工程, 2005, 4:66-68.(Ning Guifeng, Man Cuihua. The application of ANSYS on the new-style legs design. Modern Manufacturing Engineering, 2005, 4:66-68)

徐攀, 崔凯洪, 张彬, 贾凯, 熊召, 袁晓东. 夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响[J]. 强激光与粒子束, 2012, 24(9): 2079. Xu Pan, Cui Kaihong, Zhang Bin, Jia Kai, Xiong Zhao, Yuan Xiaodong. Effect of clamping modes and fabrication errors on additional surface variation of KDP crystals[J]. High Power Laser and Particle Beams, 2012, 24(9): 2079.

夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

关于本站 Cookie 的使用提示

全站搜索

夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索