中国激光, 1991, 18 (2): 132, 网络出版: 2007-11-12
A3钢的Ni-Cr-Si-B激光合金化组织的研究
Study on the microstructure of NiCrSiB laser alloying on A3 low-carbon steel
摘要
本文报道A3钢喷涂NiCrSiB粉末后的激光重熔合金化处理的研究结果,并用形核率和长大线速度与过冷度ΔT,的关系对结果作了解释。
Abstract
Investigation results of laser remelted alloying processing of A3 steel sprayed with NiCrSiB powder are reported, and explained based on the relationship among the ncele-ation rate, growth linear rate and undercooling ΔT.
参考文献
朱祖昌, 张光钧, 王维荣, 奚文龙. A3钢的Ni-Cr-Si-B激光合金化组织的研究[J]. 中国激光, 1991, 18(2): 132. 朱祖昌, 张光钧, 王维荣, 奚文龙. Study on the microstructure of NiCrSiB laser alloying on A3 low-carbon steel[J]. Chinese Journal of Lasers, 1991, 18(2): 132.
PDF全文
