振镜激光扫描测量系统误差分析与补偿 下载: 1736次
王腾, 杨树明, 李述胜, 袁野, 胡鹏宇, 刘涛, 贾书海. 振镜激光扫描测量系统误差分析与补偿[J]. 光学学报, 2020, 40(23): 2315001.
Teng Wang, Shuming Yang, Shusheng Li, Ye Yuan, Pengyu Hu, Tao Liu, Shuhai Jia. Error Analysis and Compensation of Galvanometer Laser Scanning Measurement System[J]. Acta Optica Sinica, 2020, 40(23): 2315001.
[1] 魏英杰. 基于线结构光的发动机叶片轮廓测量方法研究[D]. 成都: 电子科技大学, 2017: 4- 7.
Wei YJ. The research on measurement method of engine blade profile based on line structured light[D]. Chengdu: University of Electronic Science and Technology of China, 2017: 4- 7.
[2] 雷正龙, 沈健雄, 黎炳蔚, 等. 基于自动阈值的窄间隙端接焊缝识别技术[J]. 光学学报, 2018, 38(8): 0815011.
[3] 尹仕斌, 任永杰, 刘涛, 等. 机器视觉技术在现代汽车制造中的应用综述[J]. 光学学报, 2018, 38(8): 0815001.
[4] Park S C, Chang M. Reverse engineering with a structured light system[J]. Computers & Industrial Engineering, 2009, 57(4): 1377-1384.
[5] Yang S M, Shi X Y, Zhang G F, et al. A dual-platform laser scanner for 3D reconstruction of dental pieces[J]. Engineering, 2018, 4(6): 796-805.
[6] 解则晓, 张安祺. 超大尺度线结构光传感器内外参数同时标定[J]. 光学学报, 2018, 38(3): 0315001.
[7] 李旭东, 崔磊, 赵慧洁, 等. 双振镜点扫描三维形貌测量系统[J]. 光学精密工程, 2010, 18(7): 1648-1653.
[8] Wagner B, Stüber P, Wissel T, et al. Accuracy analysis for triangulation and tracking based on time-multiplexed structured light[J]. Medical Physics, 2014, 41(8): 082701.
[9] Chi S K, Xie Z X, Chen W Z. A laser line auto-scanning system for underwater 3D reconstruction[J]. Sensors, 2016, 16(9): 1534.
[10] Yu C Y, Chen X B, Xi J T. Modeling and calibration of a novel one-mirror galvanometric laser scanner[J]. Sensors, 2017, 17(1): 164.
[12] 解则晓, 迟书凯, 王晓敏, 等. 基于共面法的结构光自扫描测量系统参数标定方法[J]. 中国激光, 2016, 43(3): 0308003.
[13] Yang S M, Yang L L, Zhang G F, et al. Modeling and calibration of the galvanometric laser scanning three-dimensional measurement system[J]. Nanomanufacturing and Metrology, 2018, 1(3): 180-192.
[14] 周利民, 胡德洲, 卢秉恒. 激光扫描三角法测量精度因素的分析与研究[J]. 计量学报, 1998( 2): 3- 5.
Zhou LM, Hu DZ, Lu BH. A study of the precision factors of the laser scanning triangulation method[J]. Acta Metrologica Sinica, 1998( 2): 3- 5.
[15] Tsai R. A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses[J]. IEEE Journal on Robotics and Automation, 1987, 3(4): 323-344.
[16] Faugeras OD, Luong QT, Maybank SJ. Camera self-calibration: theory and experiments[M] ∥Sandini G. Computer vision-ECCV'92. Lecture notes in computer science. Heidelberg: Springer, 1992, 588: 321- 344.
[17] Zhang ZY. Flexible camera calibration by viewing a plane from unknown orientations[C]∥Proceedings of the Seventh IEEE International Conference on Computer Vision, September 20-27, 1999, Kerkyra, Greece. New York: IEEE, 1999: 666- 673.
王腾, 杨树明, 李述胜, 袁野, 胡鹏宇, 刘涛, 贾书海. 振镜激光扫描测量系统误差分析与补偿[J]. 光学学报, 2020, 40(23): 2315001. Teng Wang, Shuming Yang, Shusheng Li, Ye Yuan, Pengyu Hu, Tao Liu, Shuhai Jia. Error Analysis and Compensation of Galvanometer Laser Scanning Measurement System[J]. Acta Optica Sinica, 2020, 40(23): 2315001.