Laser drivers are an enabling factor to inertial confinement fusion, because laser diodes must be used instead of flash lamps. We discuss the limitations of laser diode arrays and show what steps the industry is taking. The pump power requirements of large-scale projects such as LIFE or HiPER are within reach of semiconductor laser diode assemblies. Pulsed light output powers per laser bars have been around 300Wper bar, as in the Jenoptik 940 nm bars previously used for pumping the Yb:YAG slabs in the DiPOLE project. By redesigning the semiconductor laser structures 500W per bar is now commercially available for 808, 880 and 940 nm pump wavelengths. The construction of one inertial fusion power plant will require an amount of semiconductor laser chips in excess of the current annual production by two orders of magnitude. This adds to the engineering task of improving the device characteristics a challenge to production capacity. While the industry benefits from the recent boost in solid-state lighting that acts as a technology driver, cooperation between manufacturers will be imperative, and to this end we propose standardization efforts.

An overview of the Czech national R&D project HiLASE (High average power pulsed laser) is presented. The project focuses on the development of advanced high repetition rate, diode pumped solid state laser (DPSSL) systems with energies in the range from mJ to 100 J and repetition rates in the range from 10 Hz to 100 kHz. Some applications of these lasers in research and hi-tech industry are also presented.