作者单位
摘要
北京邮电大学 信息光子学与光通信国家重点实验室,北京 100876
提出了一种能够实现任意滤波形状的高分辨率可重构微波光子滤波器方案。利用可编程光滤波器完成抽头系数的独立灵活配置,配合使用相干探测技术实现滤波器的正负抽头,从而可以完成滤波形状的任意可重构。研究表明一个大梳齿数量的平坦光频梳被作为光源可提高抽头数量,从而实现高分辨率的滤波器的重构。除此之外,通过预先引入色散,响应中的杂散也被有效地抑制。经仿真验证,该滤波器具有93 MHz的高分辨率,杂散抑制40 dB以上,创新性地构造了具有不同中心频率的低通、带通、高通、带阻滤波器,以及矩形、高斯形、sinc形等任意滤波形状,对于后续微波光子滤波器的研究起到了引导性作用。
微波光子学 微波光子滤波器 相干探测技术 可重构 高分辨率 杂散干扰抑制 microwave photonics microwave photonic filter coherent detection technology reconfigurability high resolution spurious interference suppressing 
红外与激光工程
2023, 52(10): 20230015
Author Affiliations
Abstract
1 Zhejiang University, College of Optical Science and Engineering, Center for Optical and Electromagnetic Research, International Research Center for Advanced Photonics, State Key Laboratory for Modern Optical Instrumentation, Hangzhou, China
2 Zhejiang University, Ningbo Research Institute, Ningbo, China
3 Zhejiang University, Jiaxing Research Institute, Intelligent Optics and Photonics Research Center, Jiaxing Key Laboratory of Photonic Sensing and Intelligent Imaging, Jiaxing, China
Dealing with the increase in data workloads and network complexity requires efficient selective manipulation of any channels in hybrid mode-/wavelength-division multiplexing (MDM/WDM) systems. A reconfigurable optical add-drop multiplexer (ROADM) using special modal field redistribution is proposed and demonstrated to enable the selective access of any mode-/wavelength-channels. With the assistance of the subwavelength grating structures, the launched modes are redistributed to be the supermodes localized at different regions of the multimode bus waveguide. Microring resonators are placed at the corresponding side of the bus waveguide to have specific evanescent coupling of the redistributed supermodes, so that any mode-/wavelength-channel can be added/dropped by thermally tuning the resonant wavelength. As an example, a ROADM for the case with three mode-channels is designed with low excess losses of <0.6, 0.7, and 1.3 dB as well as low cross talks of < - 26.3, -28.5, and -39.3 dB for the TE0, TE1, and TE2 modes, respectively, around the central wavelength of 1550 nm. The data transmission of 30 Gbps / channel is also demonstrated successfully. The present ROADM provides a promising route for data switching/routing in hybrid MDM/WDM systems.
reconfigurability hybrid multiplexing subwavelength grating silicon photonics 
Advanced Photonics Nexus
2023, 2(6): 066004
作者单位
摘要
1 江苏大学计算机科学与通信工程学院,江苏 镇江 212013
2 江苏大学江苏省工业网络安全技术重点实验室,江苏 镇江 212013
构建了一种多层嵌套的谷拓扑光子回路结构,直接通过倏逝场的耦合实现回路间的能量传递。每个回路都有自己的共振频率,通过对光源频率和位置的调节,可以选择性地激发单层或多层回路的共振模式,进而实现对光波传输路径的调控。与同类型的研究结果相比,所设计结构没有采用引入缺陷形成谐振腔的方法,而是保留了谷光子晶体结构的完整性,具有共振和波导传输的双重特征,从而增加了传输信道的密度。研究结果在可重构光子传输波导领域具有较大的应用价值。
光电子学 谷拓扑边界态 单向传输 嵌套环形回路 重构性 
光学学报
2023, 43(14): 1425001
肖路遥 1,2唐曦 1,2林晓东 1,2高子叶 1,2[ ... ]邓涛 1,2,*
作者单位
摘要
1 西南大学 物理科学与技术学院,重庆 400715
2 微纳结构光电子学重庆市重点实验室,重庆 400715
基于电流调制和光注入共同作用下的带有饱和吸收体的垂直腔面发射激光器(VCSEL-SA),提出了一种可重构的光电逻辑门(NOT,NAND,NOR,XOR),数值研究了电流调制下VCSEL-SA的spiking动力学特性,及电流调制下光注入VCSEL-SA的逻辑运算性能。研究结果表明,对于电流调制下的光注入VCSEL-SA,光电逻辑门可以在一定的偏置电流范围内实现。通过选取合适的调制电流,可以实现重构的逻辑运算(NAND,NOR),且两个调制信号之间的时延对逻辑运算性能影响较小。通过改变电流调制信号的输入方式并移除光注入信号,VCSEL-SA可以实现XOR逻辑运算。此外,基于电流调制下光注入VCSEL-SA的可重构逻辑运算对噪声有较好的容忍性。研究结果可为未来光子神经网络解决复杂的信号处理任务提供一定的理论基础。
带有饱和吸收体的垂直腔面发射激光器(VCSEL-SA) spiking动力学特性 电流调制 可重构性 光电逻辑门 Vertical-Cavity Surface-Emitting Laser with Saturated Absorber(VCSEL-SA) Spiking dynamic characteristics Current modulation Reconfigurability Optoelectronic logic gate 
光子学报
2022, 51(11): 1114005
Author Affiliations
Abstract
1 Advanced Photonics Center, Southeast University, Nanjing 210096, China
2 Collaborative Innovation Center of Light Manipulations and Applications, Shandong Normal University, Jinan 250358, China
Photonic structures with topological edge states and resonance loops are both important in optical communication systems, but they are usually two separate structures. In order to obtain a photonic system combining properties from both, we design multiple-layer nested photonic topological structures. The nested topological loops not only have topological protection immune to structural disorder and defects, but also possess both the properties of unidirectional propagation and loop resonance. Through mode analysis and simulations, we find that the transport can form diverse circulation loops. Each loop has its own resonance frequencies and can be solely excited in the nested layered structure through choosing its resonance frequencies. As a result, this work shows great application prospects in the area of reconfigurable photonic circuits.
topological edge states unidirectional propagation loops resonance reconfigurability 
Chinese Optics Letters
2022, 20(6): 061301
张金英 1,2,*王瑞 1,2,**王炳楠 1,2郝凯子 1,2[ ... ]杨苏辉 1,2
作者单位
摘要
1 北京理工大学光电学院, 北京 100081
2 精密光电测试仪器及技术北京市重点实验室, 北京 100081
基于铁电材料的介电可调特性,提出一种新颖的基于黑色层纳米薄膜的可重构可见光滤波器,并比较了它与一维光子晶体滤波器反射光谱的可重构特性。实验结果表明,利用黑色层吸收非相干散射光可显著提高反射颜色对比度。当钛酸钡(BTO)薄膜的厚度从100 nm变为140 nm时,反射光谱的峰值波长由383.7 nm移动至501.2 nm,纳米薄膜的反射颜色从紫色变为蓝绿色。反射光谱的测试结果与有限元的模拟结果一致性良好。计算结果表明,当BTO薄膜的厚度为170 nm时,在21.8 V直流驱动电压下,其折射率由2.4变化至2.0,反射峰值波长由595.3 nm移动至513.9 nm。
薄膜 可见光滤波器 可重构 一维光子晶体 钛酸钡 黑色层 
光学学报
2021, 41(22): 2231001
作者单位
摘要
东南大学先进光子学中心, 江苏 南京 210096
基于Add-Drop型氮化硅微环滤波器,利用光学单边带调制和光载波分离的方法,实现可重构微波光子带通滤波器。滤波器带宽和带外抑制比分别达到726 MHz和37.0 dB。并且通过改变光载波波长实现1.64~23.41 GHz的滤波器频率调谐;通过调节微环耦合系数实现0.683~2.246 GHz的滤波器带宽调谐,在带宽调谐范围内带外抑制比大于26 dB。
集成光学 微波光子滤波器 可重构 微环谐振腔 载波分离 
激光与光电子学进展
2020, 57(1): 011301
杨凤闹 1,2徐开 1,3李峰 3
作者单位
摘要
1 中国科学院长春光学精密机械与物理研究所,长春 130033
2 中国科学院大学,北京 100049
3 长光卫星技术有限公司,长春 130033
对卫星执行机构控制力矩陀螺的可重构性度量标准进行了研究,提出了一种基于能耗约束下的控制力矩陀螺可重构性度量标准。结合卫星姿态控制动力学与运动学方程,建立状态空间形式表达的线性姿态动力学方程,将故障失效因子向量引入到线性空间方程;建立了基于格兰姆矩阵的可重构性度量标准。最后对金字塔构型的控制力矩陀螺群进行仿真分析,仿真结果符合实际情况,验证了该度量标准的正确性与有效性。
控制力矩陀螺 可重构性 度量标准 control moment gyro reconfigurability metric 
电光与控制
2017, 24(3): 77
作者单位
摘要
Key Laboratory of All Optical Network and Advanced Telecommunication Network of Ministry Education, Institute of Lightwave Technology, Beijing Jiaotong University, Beijing 100044, China
microwave photonic filter (MPF) radio-onfiber (ROF) coherent Q value reconfigurability 
Frontiers of Optoelectronics
2010, 3(4): 354
作者单位
摘要
海军工程大学电子工程学院, 武汉 430033
针对当前RS码编译码器通用性差的特点, 以可重构的思想, 提出了一种根据输入配置信息改变电路结构, 满足多种RS码编码标准的编译码结构。介绍了基于线性反馈位移寄存器的编码原理及可重构改进方法。通过乘法和加法的迭代运算实现了伴随多项式的并行运算。采用改进欧几里德算法求解关键方程, 运用钱氏搜索算法实现了错误位置的查找, 并提出以上两种算法的可重构计算结构。通过分析可以看出: 该方案增加了少量的资源开销, 满足了多标准的RS码编译需要, 具有较好的通用性。
RS码 可重构性 改进欧几里德算法 钱氏搜索 RS code reconfigurability modified Euclidean algorithm Chien's search 
电光与控制
2010, 17(11): 82

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!