动态聚焦条件对脉冲CO<sub>2</sub>激光骨硬组织消融的影响

刘海山; 张先增; 詹振林; 赵海滨; 谢树森

doi:doi:10.3788/lop49.021701

激光与光电子学进展, 2012, 49 (2): 021701, 网络出版: 2011-11-23

动态聚焦条件对脉冲CO₂激光骨硬组织消融的影响

Influence of Dynamic Focusing Conditions on Bone Hard Tissue Ablation with Pulsed CO₂ Laser

论文大纲

刘海山 ^*张先增詹振林赵海滨谢树森

作者单位

福建师范大学激光与光电子技术研究所福建省光子技术重点实验室，医学光电科学与技术教育部重点实验室, 福建福州 350007

医用光学生物技术激光消融动态聚焦骨硬组织脉冲CO2激光 medical optics biotechnology laser ablation dynamic focusing bone hard tissue pulsed CO2 laser

摘要

激光辐照生物组织消融过程中由于工作距离的变化引起的离焦现象对消融效果具有重要影响。以新鲜离体牛胫骨组织为实验样品，置于一维电动平移台上，移动速度为5.5 mm/s；脉冲CO2激光（10.64 μm）平行光束经一可移动聚焦透镜后垂直辐照样品表面，光斑直径为200 μm。实验时通过移动聚焦透镜位置改变焦点位置，实现消融过程动态聚焦。激光辐照功率为6 W，脉冲频率为420 Hz，水喷雾协同工作，喷水速度为5.5 mL/min。辐照后，利用扫描电镜观察消融凹槽微结构，用光学相干层析成像（OCT）技术测量消融凹槽深度。结果表明，动态聚焦条件可显著提高消融速率，消融深度随等效脉冲数增加而增加，消融速率呈减小趋势；在动态聚焦条件下获得的消融凹槽的表面形貌和微结构较离焦条件下更不规则。

Abstract

Defocusing phenomenon induced by the change of the work distance in the irradiating process of biological tissue has an important influence on the effect of hard tissue ablation with pulsed lasers. Fresh bovine shank bone in vitro used in the experiment is put on a computer-controlled motorized linear drive stage and is moved repeatedly with the speed of 5.5 mm/s. A parallel beam of pulsed CO2 laser passes through a mobile focus lens and irradiates the sample surface vertically. Through changing the position of focusing lens, the focus position is altered and dynamic focusing is realized. The laser wavelength is 10.64 μm, the power is 6 W, the pulse repetition rate is 420 Hz, the spot size is about 200 μm, and the water spraying with a speed of 5.5 mL/min is used. The surface morphology and microstructure of ablation grooves are examined by scanning electron microscope (SEM). The crater depth is measured with optical coherence tomography (OCT). The results show that compared with defocusing condition, dynamic focusing condition can enhance the ablation rate and produce more irregular surface morphology and microstructure. The ablation depth increases with the increase of equivalent pulse number and the ablation rate decreases.

参考文献

[1] S. Stuebinger. Advances in bone surgery: the ErYAG laser in oral surgery and implant dentistry［J］. Clinical, Cosmetic and Investigational Dentistry, 2010, 2010(2): 47～62

[2] M. Ivanenko, M. Werner, S. Afilal et al.. Ablation of hard bone tissue with pulsed CO2 lasers［J］. Medical Laser Application, 2005, 20(1): 13～23

[3] M. Ivanenko, M. Werner, P. Hering et al.. In vivo animal trials with a scanning CO2 laser osteotome［J］. Lasers Surg. Med., 2005, 37(2): 144～148

[4] S. Stopp, B. Hohlweg-Majert, M. Deppe et al.. Bone treatment laser-navigated surgery［J］. Lasers Med. Sci., 2010, 25(1): 67～71

[5] S. Stopp, H. Deppe, T. C. Lueth et al.. A new method for optimized laser treatment by laser focus navigation and distance visualization［C］. 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2007, 1738～1741

[6] S. Stopp, H. Deppe, T. C. Lueth et al.. A new concept for navigated laser surgery［J］. Lasers Med. Sci., 2008, 23(3): 261～266

[7] S. Stopp, H. Deppe, T. C. Lueth et al.. A new approach for creating defined geometries by navigated laser ablation based on volumetric 3-D data［J］. IEEE Trans. Biomed. Engng., 2008, 55(7): 1872～1880

[8] S. Rupprecht, K. Tangermann-Gerk, J. Wiltfang et al.. Sensor-based laser ablation for tissue specific cutting: an experimental study［J］. Lasers. Med. Sci., 2004, 19(2): 81～88

[9] S. Rupprecht, K. Tangermann-Gerk, F. W. Neukam et al.. Neurophysiological monitoring of alveolar nerve function during sensor-controlled ErYAG laser corticotomy in rabbits［J］. Lasers Surg. Med., 2005, 36(3): 186～192

[10] S. Rupprecht, K. Tangermann-Gerk, J. Wiltfang et al.. ErYAG laser osteotomy directed by sensor controlled systems［J］. J. Cranio-Maxillo-Facial Surgery, 2003, 31(6): 337～342

[11] 张先增, 谢树森, 詹振林等. 不同离焦条件对骨硬组织激光消融的影响［J］. 中国激光, 2008, 35(7): 1116～1120

Zhang Xianzeng, Xie Shusen, Zhan Zhenlin et al.. Influence of different defocus conditions on bone hard tissue ablation with pulsed CO2 laser［J］. Chinese J. Lasers, 2008, 35(7): 1116～1120

[12] 张先增. 脉冲激光诱导生物硬组织消融及其医疗新技术［D］.福州：福建师范大学, 2010. 57～79

Zhang Xianzeng. Hard Biotissue Ablation with Pulse Lasers and Its Novel Medical Technology［D］.Fuzhou: Fujian Normal University, 2010. 57～79

[13] Xianzeng Zhang, Shusen Xie, Qing Ye et al.. Influence of scanning velocity on bovine shank bone ablation with pulsed CO2 laser［J］. Chin. Opt. Lett., 2009, 7(2): 138～141

[14] 赵海滨, 张先增, 詹振林等. 组织表面附着水膜层对脉冲CO2激光骨硬组织消融的影响［J］. 中国激光, 2011, 38(1): 0104002

Zhao Haibin, Zhang Xianzeng, Zhan Zhenlin et al.. Influence of an applied water film on bone hard tissue ablation with pulsed CO2 laser［J］. Chinese J. Lasers, 2011, 38(1): 0104002

[15] 辛慧, 周致富, 王国祥等. 激光手术喷雾冷却中R404a液滴的蒸发特性［J］. 中国激光, 2009, 36(10): 2691～2695

Xin Hui, Zhou Zhifu, Wang Guoxiang et al.. Evaporation characteristics of single R404a droplet in laser treatment of PWS in conjunction with cryogen spray cooling［J］. Chinese J. Lasers, 2009, 36(10): 2691～2695

刘海山, 张先增, 詹振林, 赵海滨, 谢树森. 动态聚焦条件对脉冲CO₂激光骨硬组织消融的影响[J]. 激光与光电子学进展, 2012, 49(2): 021701. Liu Haishan, Zhang Xianzeng, Zhan Zhenlin, Zhao Haibin, Xie Shusen. Influence of Dynamic Focusing Conditions on Bone Hard Tissue Ablation with Pulsed CO₂ Laser[J]. Laser & Optoelectronics Progress, 2012, 49(2): 021701.

动态聚焦条件对脉冲CO₂激光骨硬组织消融的影响

关于本站 Cookie 的使用提示

全站搜索

动态聚焦条件对脉冲CO2激光骨硬组织消融的影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

动态聚焦条件对脉冲CO₂激光骨硬组织消融的影响