低碳钢的激光除锈机理及表面性能研究

激光除锈技术是一种新型、绿色环保的除锈方法。对一些在极易生锈的工作环境中的低碳钢构件，采用激光除锈技术代替传统除锈方法，有广阔的发展前景。激光除锈技术主要利用辐射在锈蚀表面的激光能量高、脉冲短的特点，使锈蚀温度很快达到熔点以上。但在除锈的同时，会有部分激光透过锈蚀层直接与金属基底作用，以及辐射在锈蚀表面的激光也会通过热传导将部分能量传递到金属基底表面。本文采用实验分析手段，对金属基底表面的微观组织、力学性能、硬度等进行对比研究。结果表明，所采用的激光除锈工艺在获得良好的除锈效果情况下，对金属基底没有造成损伤，对金属基底表面性能没有产生显著影响.

Abstract

Laser derusting technology is a new and green rust removing method. For some low carbon steel in an environment prone to rust, traditional rust removing method can be replaced by laser derusting technology, which has broad prospects. The corrosion surface of the laser radiation has the characteristics of high laser energy and short pulse, so that the corrosion temperature quickly reaches above the melting point. But at the same time of laser rust removal, there will be some laser directly through the rust layer, and the laser radiation on the corrosion surface will also transfer part of the energy to the metal substrate surface through heat conduction. By means of experimental analysis on the surface of the metal base, microstructure, mechanical properties and hardness were studied and compared. The results show that the laser derusting process has a good rust removal effect, laser derusting technology does not damage to the metal substrates and the properties of the surface has not been affected.

参考文献

[1] 解宇飞, 刘洪伟, 胡永祥. 船舶板材激光除锈工艺参数确定方法研究[J]. 中国激光, 2016, 43(4): 0403008.

Xie Yufei, Liu Hongwei, Hu Yongxiang. Determining process parameters for laser derusting of ship steel plates[J]. Chinese Journal of Lasers, 2016, 43(4): 0403008.

[2] Tam A C, Park H K, Grigoropoulos C P. Laser cleaning of surface contaminants[J]. Applied Surface Science, 1998, 127–129: 721–725.

[3] Koh Y S, Powell J, Kaplan A, et al. Laser cleaning of corroded steel surfaces: a comparison with mechanical cleaning methods[M]//Nimmrichter J, Kautek W, Schreiner M. Lasers in the Conservation of Artworks. Berlin Heidelberg: Springer, 2007: 13–20.

[4] Lu Y F, Song W D, Hong M H, et al. Mechanism of and method to avoid discoloration of stainless steel surfaces in laser cleaning[J]. Applied Physics A, 1997, 64(6): 573–578.

[5] Li Xiaoguang, Huang Tingting, Chong Angwei, et al. Laser cleaning of steel structure surface for paint removal and re-paint adhesion[J]. Opto-Electronic Engineering, 2017, 44(3): 340–344.

[6] Chen G X, Kwee T J, Tan K P, et al. Laser cleaning of steel for paint removal[J]. Applied Physics A, 2010, 101(2): 249–253.

[7] Pini R, Siano S, Salimbeni R, et al. Tests of laser cleaning on archeological metal artefacts[J]. Journal of Cultural Heritage, 2000, 1(S1): S129–S137.

[8] 凌晨, 季凌飞, 吴燕, 等. 金属正畸托槽皮秒激光清洗实验及其机理研究[J]. 中国激光, 2014, 41(4): 0403005.

Ling Chen, Ji Lingfei, Wu Yan, et al. Research and mecha-nism study on refurbishing stainless bracket using picosecond laser based on laser cleaning technology[J]. Chinese Journal of Lasers, 2014, 41(4): 0403005.

[9] Cherenda N N, Smilgin A A, Uglov V V, et al. Cleaning of steel surface from scale by compression plasma flows[J]. Surface and Coatings Technology, 2014, 255: 79–83.

[10] 崔航, 陈怀宁, 陈静, 等. 球形压痕法评价材料屈服强度和应变硬化指数的有限元分析[J]. 金属学报, 2009, 45(2): 189–194.

Cui Hang, Chen Huaining, Chen Jing, et al. Fea of evaluating material yield strength and strain hardening exponent using a spherical indentation[J]. Acta Metallurgica Sinica, 2009, 45(2): 189–194.

[11] Wang Zemin, Zeng Xiaoyan, Huang Weiling. Parameters and surface performance of laser removal of rust layer on A3 steel[J]. Surface and Coatings Technology, 2003, 166(1): 10–16.

[12] Koh Y, Sárady I. Cleaning of corroded iron artefacts using pulsed TEA CO2- and Nd: YAG-lasers[J]. Journal of Cultural Heritage, 2003, 4(S1): 129–133.

[13] 崔晓鸣, 刘登瀛, 淮秀兰. 高能脉冲激光作用下材料表面温度场[J]. 北京科技大学学报, 2000, 22(5): 470–474.

Cui Xiaoming, Liu Dengying, Huai Xiulan. Temperature fields on materials surface under high-energy pulse laser irradia-tion[J]. Journal of University of Science and Technology Bei-jing, 2000, 22(5): 470–474.

[14] 杨波, 顾济华, 桂如胜. 脉冲激光加热材料的温度场解析[J]. 苏州大学学报(自然科学版), 2008, 24(4): 41–44.

Yang Bo, Gu Jihua, Gui Rusheng. Study on model about the material heated by pulse laser[J]. Journal of Suzhou Univer-sity (Natural Science), 2008, 24(4): 41–44.

[15] 邱兆飚, 朱海红. 脉冲激光除锈工艺研究[J]. 应用激光, 2013, 33(4): 416–420.

Qiu Zhaobiao, Zhu Haihong. Process parameter study on the removing rust using pulsed laser[J]. Applied Laser, 2013, 33(4): 416–420.

[16] 田彬, 邹万芳, 刘淑静, 等. 激光干式除锈[J]. 清洗世界, 2006, 22(8): 33–38.

Tian Bin, Zou Wanfang, Liu Shujing, et al. Introduction of rust removed by dry laser cleaning[J]. Cleaning World, 2006, 22(8): 33–38.

任志国, 吴昌忠, 陈怀宁, 陆莹, 乔红超, 胡太友. 低碳钢的激光除锈机理及表面性能研究[J]. 光电工程, 2017, 44(12): 1210. Zhiguo Ren, Changzhong Wu, Huaining Chen, Ying Lu3*, Hongchao Qiao, Taiyou Hu. Mechanism of laser derusting and surface properties of low carbon steel[J]. Opto-Electronic Engineering, 2017, 44(12): 1210.

低碳钢的激光除锈机理及表面性能研究

关于本站 Cookie 的使用提示

全站搜索

低碳钢的激光除锈机理及表面性能研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索