[1] . S. Tian, C. Z . Chen, L. X. Chen et al.. Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying technique[J]. Scripta Materialia, 2006, 54(5): 847-852.

[2] . 钛合金表面改性层的摩擦学性能[J]. 摩擦学学报, 2003, 23(2): 91-94.

    . Tribological behavior of surface-modified layers on Ti alloy[J]. Tribology, 2003, 23(2): 91-94.

[3] B. Courant, J. Hantzpergue, S. Benayoun. Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction［J］. Wear, 1999, 236(1-2): 39～46

[4] . . Enhancing the microstructure and properties of titanium alloy through nitriding and other surface engineering methods[J]. Surface and Coatings Techaology, 2005, 200(7): 2192-2207.

[5] . 两种物理气相沉积氮化钛涂层的结构及摩擦性能研究[J]. 摩擦学报, 2002, 22(3): 175-178.

    . . Structure and tribological properties of TiN coatings deposited with two different PVD methods[J]. Tribology, 2002, 22(3): 175-178.

[6] 梁京, 高明媛, 刘常升 等. 激光诱导原位反应制备钛基复合涂层的工艺研究［J］. 中国激光, 2009, 36(12): 3272～3276

    Liang Jing, Gao Mingyuan, Liu Changsheng et al.. Laser Induced in-situ formation of titanium composite coatings［J］. Chinese J. Lasers, 2009, 36(12): 3272～3276

[7] 王维夫, 孙凤久, 王茂才. TA2钛合金表面激光熔覆Ni基Tribaloy 700涂层［J］. 中国激光, 2007, 34(12): 1710～1715

    Wang Weifu, Sun Fengjiu, Wang Maocai. Laser cladding Ni based Tribaloy 700 coatings on TA2 titanium alloy［J］. Chinese J. Lasers, 2007, 34(12): 1710～1715

[8] 孙荣禄, 刘智勇, 牛伟 等. 钛合金稀释作用对NiCrBSiC激光熔覆层微观结构的影响［J］. 中国激光, 2008, 35(11): 1741～1745

    Sun Ronglu, Liu Zhiyong, Niu Wei et al.. Influence of Ti substrate dilution on the microstructure of NiCrBSiC laser clad coatings［J］. Chinese J. Lasers, 2008, 35(11): 1741～1745

[9] . Jiang, X. L. He, X. X. Li et al.. Wear resistance of a laser surface alloyed Ti-6Al-4V alloy[J]. Surface and Coating Technology, 2000, 130(1): 24-28.

[10] 刘常久, 陈岁原, 尚丽娟. γ-TiAl合金激光表面气相组织与性能［J］. 中国激光, 2002, A29(3): 277～280

    Liu Changjiu, Chen Suiyuan, Shang Lijuan. Microstructure and property of laser gas Ni triding on γ-TiAl alloy［J］. Chinese J. Lasers, 2002, A29(3): 277～280

[11] . Xin, C. Hu, L. M. Watson et al.. Anlysis of the phases developed by laser nitriding Ti-6Al-4V alloys[J]. Acta Materialia, 1997, 45(10): 4311-4322.

[12] M. G. Pérez, N. R. Harlan, F. Zapirain et al.. Laser nitriding of an intermetallic TiAl alloy with a diode laser［J］. Surface & Coatings Technology, 2006, 200(16-17): 5152～5159

[13] . H. Abboud, A. F. Fidel, K. Y. Benyounis. Surface nitriding of Ti-6Al-4V alloy with a high power CO2 laser[J]. Optics & Laser Technology, 2008, 40(2): 405-414.

[14] Mohmad Soib Selamat, T. N. Baker, L. M. Watson. Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment［J］. Journal of Material Processing Technology, 2001, 113(1-3): 509～515

[15] . S. Yilbas, M. S. J. Hashmi. Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding[J]. Journal of Materials Processing Technology, 2000, 103(2): 304-309.

[16] . 工业纯钛TA2的激光气体氮化[J]. 兰州理工大学学报, 2006, 32(3): 1-3.

    . . Laser gas nitriding of commercial pure titanium TA2[J]. Journal of Lanzhou University of Technology, 2006, 32(3): 1-3.

[17] L. Covelli, F. Pierdominici, I. Smurov et al.. Surface microstructure of titanium irradiated by NdYAG pulsed laser in present of carbon and nitrogen［J］. Surface and Coating Technology, 1996, 78(1-3): 196～204

[18] . S. Yilbas, M. S. J. Hashmi. Laser treatment of Ti-6Al-4V alloy prior to plasma nitriding[J]. Journal of Materials Processing Technology, 2000, 103(2): 304-309.

[19] . Guemmaz, A. Mosser, J. J. Grobet. Ion implantation processing of sub-stoichiometric titanium nitrides and carbonitrides: chemical structural and micromechanical investigations[J]. Appl. Phys. A., 1997, 64(4): 407-415.

[20] M. Wittling, A. Bendavid, P. J. Martin et al.. Influence of thickness and substrate on the hardness and deformation of TiN film［J］ . Thin Solid Films, 1995, 270(1-2): 283～288

[21] S. Gorsse, Y. L. Petitcorps, S. Matar. Investigation of the Young′s modulus of TiB needles in situ produced in titanium matrix composite［J］ . Mater Sci. Eng. A., 2003, 340(1-2): 80～87

[22] 金永吉, 邵天敏, 尹亮 等. 脉冲激光诱导钛表面氮化的研究［J］. 材料工程, 2006, (1): 53～56

    Jin Yongji, Shao Tianmin, Yin Liang et al.. Investigation on surface nitridation of titanium by pulsed laser［J］ . Journal of Materials Engineering, 2006, (1): 53～56

[23] . P. Wen, R. L . Zong, F. Zeng et al.. Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers[J]. Appl. Surf. Sci., 2009, 255(8): 4558-4562.

[24] A. Leyland, A. Matthews. On the significance of the H/E ratio in wear control: A nanocomposite approach to optimised tribological behaviour［J］. Wear, 2000, 246(1-2): 1～11

[25] . Lukitsch Michael et al.. Effects of the ratio of hardness to Young′s modulus on the friction and wear behavior of bilayer coatings[J]. Appl. Phys. Lett., 2004, 85(18): 4028-4030.

[26] . Ti-6Al-4V合金离子渗镀Mo组织结构及其腐蚀性能研究[J]. 中国腐蚀与防护学报, 2007, 27(1): 31-34.

    . . Structure and corrosion behavior of Mo modified layer on Ti-6Al-4V alloy with plasma surface alloying technique[J]. Jounal of Chinese Society Corrosion and Protecting, 2007, 27(1): 31-34.

[27] . 纯钛Mo-N共渗改性层在H2SO4溶液中的腐蚀行为研究[J]. 稀有金属快报, 2005, 24(11): 21-24.

    . . Electrochemical behavior of Mo-N modified layer on pure titanium with plasma surface alloying technique[J]. Rare Metals Letters, 2005, 24(11): 21-24.