[1] F Vollertsen, J Schumacher, K Schneider, et al.. Innovative welding strategies for the manufacture of large aircraft[J]. Welding Research Abroad, 2005, 51(2): 1-17.

[2] J C Williams, E A Starke. Progress in structural materials for aerospace systems[J]. Acta Mater, 2003, 51(19): 5775-5799.

[3] K H Rengdigs. Aluminium structures used in aerospace-status and prospects[J]. Materials Science Forum, 1996, 242(11): 11-24.

[4] J L Enrique, J G Nicholas. Review aluminum-lithium alloys[J]. Mater Sci, 1987, 22(5): 1521-1529.

[5] R K Gupta, N Nayan, G Nagasireesha. Development and characterization of Al-Li alloys[J]. Materials Science and Engineering A, 2006, A420: 228-234.

[6] 左铁钏, 肖荣诗, 陈铠, 等. 高强铝合金的激光加工[M]. 北京: 国防工业出版社, 2002: 1-4, 87-89.

    Zuo Tiechuan, Xiao Rongshi, Chen Kai, et al.. Laser Materials Processing of High Strength Aluminum Alloys[M]. Beijing: National Defense Industry Press, 2002: 1-4, 87-89.

[7] 许良红, 田志凌, 彭云, 等. 高强铝合金的激光焊接头组织及力学性能 [J]. 中国激光, 2008, 35(3): 456-461.

    Xu Lianghong, Tian Zhiling, Peng Yun, et al.. Microstructure and mechanical properties of high strength aluminum alloy laser welds[J]. Chinese J Lasers, 2008, 35(3): 456-461.

[8] 翟玉峰, 黄坚, 李敏, 等. 6061-T6铝合金高速高功率CO2激光填丝焊接性的研究[J]. 中国激光, 2011, 38(5): 0503001.

    Zhai Yufeng, Huang Jian, Li Min, et al.. Research on high speed high power CO2 laser welding of 6061-T6 aluminum with filler wire[J]. Chinese J Lasers, 2011, 38(5): 0503001.

[9] 王涛, 周惦武, 彭艳, 等. 钢/铝异种金属预置Si粉的光纤激光焊接[J]. 中国激光, 2012, 39(3): 0303009.

    Wang Tao, Zhou Dianwu, Peng Yan, et al.. Steel-to-aluminum fiber laser butt welding with Si powder pre-filling[J]. Chinese J Lasers, 2012, 39(3): 0303009.

[10] 董鹏, 陈凯华, 肖荣诗. 铝铜异种金属激光深熔钎焊接头力学性能[J]. 中国激光, 2011, 38(6): 0603009.

    Dong Peng, Chen Kaihua, Xiao Rongshi. Mechanical properties of aluminum copper joint by laser penetration brazing[J]. Chinese J Lasers, 2011, 38(6): 0603009.

[11] J Schumacher, I Zerner, G Neye, et al.. Laser beam welding of aircraft fuselage panels[C]. Proceedings of ICALEO, 2002. 11.

[12] P Mueller-hummel, S Ferstl, M Sengotta, et al.. Laser beam welding of high stressed complex aircraft structural parts[C]. SPIE, 2003, 4831: 438-441.

[13] B Brenner, J Standfuss, D Dittrich, et al.. Laser beam welding of aircraft fuselage structures[C]. Proceedings of ICALEO, 2008, 1801: 838-845.

[14] A Kostrivas, J C Lippold. Weldability of Li-bearing aluminium alloys[J]. Int Mater Rev, 1999, 44(6): 217-237.

[15] 肖荣诗, 杨武雄, 陈铠. 1420铝锂合金YAG激光焊接[J]. 中国激光, 2007, 34(s1): 239-241.

    Xiao Rongshi, Yang Wuxiong, Chen Kai. NdYAG laser welding of 1420 aluminum lithium alloy[J]. Chinese J Lasers, 2007, 34(s1): 239-241.

[16] Chen Kai, Yang Wuxiong, Xiao Rongshi. Direct laser welding for Al-Li alloy plate without prior surface cleaning[J]. Lasers in Engineering, 2012, 22(516): 361-369.

[17] 蔡华, 肖荣诗, 陈铠. 1420铝锂合金CO2激光焊接接头的力学性能研究[J]. 中国激光, 2009, 36(s1): 122-125.

    Cai Hua, Xiao Rongshi, Chen Kai. Mechanical property of CO2 laser welded joint of 1420 aluminum-lithium alloy[J]. Chinese J Lasers, 2009, 36(s1): 122-125.

[18] D Dittrich, J Standfuss, J Liebscher, et al.. Laser beam welding of hard to weld Al alloys for a regional aircraft fuselage design-first results[C]. Physics Procedia, 2011, 12(15): 113-122.

[19] M B D Ellis. Fusion welding of aluminum-lithium alloys[J]. Welding & Metal Fabrication, 1996, 64(2): 55-60.

[20] 肖荣诗, 杨武雄, 陈铠. 1420铝锂合金激光焊接气孔行为特性研究 [J]. 应用激光, 2007, 27(1): 13-17.

    Xiao Rongshi, Yang Wuxiong, Chen Kai. Porosity characterization in laser welds of Al-Li alloy 1420[J]. Applied Laser, 2007, 27(1): 13-17.