光子学报, 2016, 45 (3): 0322002, 网络出版: 2016-04-01   

用于集成成像3D显示的曲面微透镜阵列设计与仿真

Design and Simulation of Curved Microlens Array for Integral Imaging 3D Display
作者单位
福州大学 物理与信息工程学院,福州 350002
摘要
针对集成成像3D显示观看视场范围小的问题和微透镜之间间隙的杂散光干扰导致的显示质量下降问题,提出了适合柔性显示及曲面显示器的曲面针孔/微透镜阵列结构.采用TracePro光学仿真软件对基于曲面针孔/微透镜阵列的集成成像3D显示的记录和重构过程进行仿真,结果显示:在记录和重构阶段,曲面针孔/微透镜阵列可以有效地减少透镜阵列之间杂散光引起的图像质量变差的问题;当记录和重构阶段均用曲面/针孔微透镜阵列时,记录三维物体的视角大,获得重构图像的视场角也相对较高.采用旋转接收屏法获取不同观看视角下的图像质量,当曲面针孔/微透镜阵列的曲面度数为30°时,重构图像质量最好.
Abstract
Integral imaging 3D display has a small field of view range, and the stray light between the microlens will cause degradation of reconstructed images. In view of these problems, this paper presents a pinhole/ microlens array structure with curved surface, which fits flexible display and curved surface display well. The parametric analysis of curved surface pinholes / microlens array according to the integrated imaging principle conducted, and the recording and reconstruction process of integrated imaging 3D display based on curved surface pinholes / microlens array was simulateed with TracePro. The results show that, in the recording and reconstruction process, the quality of reconstructed image can be improved by the curved surface pinholes / microlens array structure. Concretely, a larger visual angle of three-dimensional objects is obtained in recording process and the field angle of reconstructed image is larger relatively. The quality of reconstructed images are accessed by rotating the receiving screen, and it is found that the best images can be obtained when the curved degree of the curved surface pinholes / microlens array is 30°.
参考文献

[1] 徐茵.集成成像三维显示光场转换与重构方法研究[D].西安:西安电子科技大学工学系, 2013:1-126.

    XU Yin. Light field transformation and reconstruction in three dimensional integral imaging displays[D]. Xi'an: Engineering of Electronic Science and Technology School of Xi'an University, 2013:1-126.

[2] 王琼华.3D显示技术与器件[M].北京:科学出版社, 2011:2-245.

[3] TAY S, BLANCHE P A, VOORAKARANAM R, et al. An updatable holographic three-dimensional display[J]. Nature, 2008, 451(7179): 694-698.

[4] 王宇,陈殿仁,朴燕, 等.基于视差信息的三维图像的计算机重构[J] .光子学报,2009,38(11):2968-2971.

    WANG Yu, CHEN Dian-ren, PU Yan, et al. Computational reconstructed three-dimensional image based on disparity information[J]. Acta Photonica Sinica, 2009, 38(11):2968-2971.

[5] 焦甜甜, 王琼华, 李大海, 等.基于3DMAX的集成成像研究[J] .液晶与显示, 2008, 23(5):621-624.

    JIAO Tian-tian, WANG Qiong-hua, LI Da-hai, et al. Computer-generated integral imaging based on 3DS MAX[J]. Chinese Journal of Liquid Crystals and Displays, 2008, 23(5):621-624.

[6] WANG J, SUENAGA H, LIAO H, et al. Real-time computer-generated integral imaging and 3D image calibration for augmented reality surgical navigation[J]. Computerized Medical Imaging and Graphics, 2015, 40: 147-159.

[7] 张雷, 杨勇,赵星, 等.多级投影式集成成像三维显示的视场角拓展[J] .光学精密工程, 2013,21(1):1-6.

    ZHANG Lei, YANG Yong, ZHAO Xing, et al. Enhancement of viewing angle of multi-atage projection-type integral imaging 3D display[J]. Optics and Precision Engineering, 2013, 21(1):1-6.

[8] 赵星, 王芳, 杨勇, 等.集成成像三维显示系统显示性能的研究进展[J] .中国光学, 2012, 5(3):209-221.

    ZHAO Xing, WANG Fang, YANG Yong, et al. Research progress of display performance of integral three dimensional imaging three-dimensional display system[J]. Chinese Optics, 2012, 5(3):209-221.

[9] 邓欢,李述利, 吴非, 等.增大3D观看视角的会聚式集成成像[J] .光学精密工程, 2014, 22(1):1-6.

    DENG Huan, LI Shu-li, WU Fei, et al. Toed--in integral imaging with enhanced 3D viewing angle[J]. Optics and Precision Engineering, 2014, 22(1):1-6.

[10] 苟健, 尹韶云, 邓启凌, 等.基于双层微透镜阵列的移动视差式立体显示屏[J] .光子学报, 2014, 43(4):1-4.

    GOU Jian, YIN Sao-yun, DENG Qi-ling, et al. Design of motion parallax stereoscopic display system based on bilayer microlens array[J]. Acta Photonica Sinica, 2014, 43(4):1-4.

[11] ALAM M A, KWON K C, PIAO Y L, et al. Viewing-angle-enhanced integral imaging display system using a time-multiplexed two-directional sequential projection scheme and a DEIGR algorithm[J]. Photonics Journal, IEEE, 2015, 7(1): 1-14.

[12] 一丁.《曲面电视显示性能评价规范》发布[J] .电器, 2014, 12(12):44-45.

    YI Ding. "Surface TV show performance evaluation norms" released[J]. Appliances, 2014, 12(12):44-45.

[13] OSHIMA Y, TAKAHASHI H, YAMADA K. Wide viewing angle three-dimensional display using curved HOE lens array[C].IS&T/SPIE Electronic Imaging. International Society for Optics and Photonics, 2013: 86481N-86481N-9.

[14] 颜稳萍, 郭震宁, 林介本, 等.实现近场均匀照明的双自由曲面大角度透镜设计[J] .光子学报, 2015, 44(1):1-6.

    YANG Wen-ping, GUO Zhen-ning, LIN Jie-ben, et al. Design of double freeform-surface lens with large view angle for uniform illumination of the near-filed[J]. Acta Photonica Sinica, 2015, 44(1):1-6.

[15] 曹保柱.基于LCD的集成成像立体显示技术研究[D].西安:西安电子科技大学工学系, 2011:1-70.

    CAO Bao-zhu. Research on the stereoscopic display technology of integral imaging based on LCD[D]. Xi'an: Engineering of Electronic Science and Technology School of Xi'an University, 2011:1-70.

[16] 周雄图, 陈恩果, 姚剑敏, 等.用于集成成像的针孔微透镜组合阵列设计与仿真[J] .液晶与显示, 2013, 28(6):856-860.

    ZHOU Xiong-tu, CHEN En-guo, YAO Jian-min, et al. Design and simulation of combined pinholes/microlens array for integral imaging[J]. Chinese Journal of Liquid Crystals and Displays, 2013, 28(6):856-860.

[17] 黎达,赵星, 杨勇, 等.三维集成成像中无串扰显示系统的设计与实现[J].光电子激光, 2012, 23(1):35-40.

    LI Da, ZHAO Xing, YANG Yong, et al. Non-flipping reconstruction system design and implementation in three dimensional integral imaging[J]. Journal of Optoeletronics Laser, 2012, 23(1):35-40.

彭玉颜, 周雄图, 张永爱, 杨兰, 郭太良. 用于集成成像3D显示的曲面微透镜阵列设计与仿真[J]. 光子学报, 2016, 45(3): 0322002. PENG Yu-yan, ZHOU Xiong-tu, ZHANG Yong-ai, YANG Lan, GUO Tai-liang. Design and Simulation of Curved Microlens Array for Integral Imaging 3D Display[J]. ACTA PHOTONICA SINICA, 2016, 45(3): 0322002.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!