冷冻靶中硅冷却臂的温度场和力学分析
徐斌, 刘景全, 江水东, 黄永华, 杨斌, 陈翔, 杨春生. 冷冻靶中硅冷却臂的温度场和力学分析[J]. 强激光与粒子束, 2015, 27(6): 062009.
Xu Bin, Liu Jingquan, Jiang Shuidong, Huang Yonghua, Yang Bin, Chen Xiang, Yang Chunsheng. Temperature field and mechanical properties of cooling arm for cryogenic target[J]. High Power Laser and Particle Beams, 2015, 27(6): 062009.
[1] 张杰.浅谈惯性约束核聚变[J].物理,1999,3:142-152.(Zhang Jie.An overview of inertial confinement fusion.Physics,1999,3:142-152)
[2] Lindl J D.Development of the indirect-drive approach to inertial confinement fusion and the target physics basis for ignition and gain[J].Phys Plasmas,1995,2:3933-4024
[3] Moses E I.Ignition on the National Ignition Facility:a path towards inertial fusion energy[J].Nuclear Fusion,2009,49:104022.
[4] Lindl J D,McCrory R L,Campbell E M.Progress towards ignition on the National Ignition Facility[J].Phys Plasmas,2013,20:070501.
[5] Glenzer S H,Collahan D A,Mackinnon A J,et al.Cryogenic thermonuclear fuel implosions on the National Ignition Facility[J].Phys Plasmas,2012,19:056318.
[6] Atherton J L.Targets for the National Ignition Campaign[J].Journal of Physics,2008:032063.
[7] Miles R,Hamilton J,Aeawford J.Microfabricated deep-etched structures for ICF and equation of-state targets[J].Fusion Science and Technology,2009,55(3):308-312.
[9] 张勇,唐昶环,张继成,等.ICF冷冻靶中Si冷却臂结构的初步设计[J].原子能科学技术,2013,47(11):2152-2155.(Zhang Yong,Tang Changhuan,Zhang Jicheng,et al.Primary design of Si cooling arm structure in ICF cryogenic target.Atomic Energy Science and Technology,2013,47(11):2152-2155)
[11] Kim J,Cho D I,Muller R S.Why is (111)silicon a better mechanical material for MEMS[J].Transducers,2001:662-665
[12] Pike W T,Karl W J,Kumar S,et al.Analysis of sidewall quality in through-wafer deep reactive-ion etching[J].Microelectron Eng,2004,73/74:340-345
[13] Ikehara T,Maeda R.Fabrication of an accurately vertical sidewall for optical switch applications using deep RIE and photoresist spray coating[J].Microsyst Technol,2005,12:98-103.
[14] Chung C K.Geometrical pattern effect on silicon deep etching by an inductively coupled plasma system[J].J Micromech Microeng,2004,14:656-662.
[15] Agarwal R,Samson S,Bhansali S.Fabrication of vertical mirrors using plasma etch and KOH:IPA polishing[J].J Micromech Microeng,2007,17:26-35.
[16] Junji O,Yukihiro T,Kazuo S.Improvement of high aspect ratio Si etching by optimized oxygen plasma irradiation inserted DRIE[J].J Micromech Microeng,2009,19:095022.
徐斌, 刘景全, 江水东, 黄永华, 杨斌, 陈翔, 杨春生. 冷冻靶中硅冷却臂的温度场和力学分析[J]. 强激光与粒子束, 2015, 27(6): 062009. Xu Bin, Liu Jingquan, Jiang Shuidong, Huang Yonghua, Yang Bin, Chen Xiang, Yang Chunsheng. Temperature field and mechanical properties of cooling arm for cryogenic target[J]. High Power Laser and Particle Beams, 2015, 27(6): 062009.
PDF全文
