[1] 张屹，谭力鹏，张成磊. 车用高强钢激光填充热丝对接焊间隙裕度研究［J］.中国激光，2013, 40(7): 0703003.

    Zhang Yi, Tan Lipeng, Zhang Chenglei. Research on gap margin in laser butt welding of high-strength automobile steel with hot wire filler［J］. Chinese J Lasers, 2013, 40(7): 0703003.

[2] 伍强，陈根余，王贵，等. 高强度镀锌钢的CO2激光焊接［J］.中国激光，2006, 33(8):1134-1138.

    Wu Qiang, Chen Genyu, Wang Gui, et al.. CO2 laser welding of zinc coated high strength steel［J］. Chinese J Lasers, 2006, 33(8):1134-1138.

[3] 杨亘，夏琴香，邱遵文，等.高强钢板在汽车上的应用及冲压成形性能研究现状［J］.现代制造工程，2012, 7:138-143.

    Yang Gen, Xia Qinxiang, Qiu Zunwen, et al.. Applications of high strength steel in automobile and the research status of stamping forming properties［J］.Modern Manufacturing Engineering，2012,7:138-143.

[4] 姜潮，李超，陶友瑞.冲压成型板材特性参数的反求方法［J］.汽车工程，2012, 34(4):373-378.

    Jiang Chao, Li Chao, Tao Yourui.An inverse technique for determining the material property parameters of sheet metal after stamping［J］.Automotive Engineering，2012, 34(4):373-378.

[5] 肖业兴，马铁军. 金属薄板冲压成形的有限元模拟研究［J］.锻压技术，2012, 37(1):165-168.

    Xiao Yexing, Ma Tiejun. FEM simulation of sheet metal stamping［J］.Forging & Stamping Technology，2012, 37(1):165-168.

[6] 段园培，张海涛，余小鲁，等. 304不锈钢板料激光热应力成形试验研究［J］.应用激光，2012, 32(5):403-407.

    Duan Yuanpei, Zhang Haitao, Yu Xiaolu, et al.. Study on laser forming of AISI 304-sheet metal by thermal stress［J］.Applied Laser，2012, 32(5): 403-407.

[7] 周益军，张永康，游文明，等.脆性球铁板料激光热应力成形［J］.中国激光，2008, 35(6):937-942.

    Zhou Yijun, Zhang Yongkang, You Wenming, et al.. Forming of brittle nodular cast iron plate by laser thermal stress［J］. Chinese J Lasers, 2008, 35(6):937-942.

[8] 周益军，张永康，周建忠，等.激光诱发板材热应力成形技术及其研究现状［J］.激光技术，2006, 30(4):425-428.

    Zhou Yijun, Zhang Yongkang, Zhou Jianzhong, et al.. Development of sheet metal forming with thermal stress induced by laser［J］.Laser Technology，2006, 30(4):425-428.

[9] 孔源，刘伟军，王越超，等.扫描方式对激光直接成形过程中热力耦合场与残余应力分布的影响［J］.激光与光电子学进展，2012, 49(5):051405.

    Kong Yuan, Liu Weijun, Wang Yuechao, et al.. Effect of scanning methods onresidual stress distribution and thermal-stress couple field during direct laser metal deposition shaping［J］.Laser & Optoelectronics Progress，2012, 49(5):051405.

[10] Geiger M, Merklein M, Pitz M. Laser and forming technology-an idea and the way of implementation ［J］．Journal of Materials Processing Technology, 2004,151(1):3-11.

[11] Majumdar J D，Nath A K，Manna I．Studies on laser bending of stainless steel ［J］．Materials Science and Engineering A，2004，385（1）：113-122.

[12] 周益军.基于激光热应力的金属薄板无模成形的基础研究［D］. 镇江：江苏大学, 2007: 20-22.

    Zhou Yijun. A Fundamental Study on Laser Forming of Sheet Metal Without Mould Based on Thermal Stress ［D］. Zhenjiang: Jiangsu Vniversity,2007:20-22.