全自动金丝球焊机X-Y工作台的误差分析
[1] 袁哲俊,王先逵.精密和超精密加工技术[M].北京: 倒ひ党霭嫔 1999.YUAN ZH J,WANG X K.The precision and ultraprecision machining technology[M].Beijing:China Machine Press,1999.(in Chinese)
[2] 史习敏,黎永明.精密机械设计[M].上海:上海科学技术出版社,1987.SHI X M,LI Y M.Precision machining design[M].Shanghai:Shanghai Science and Technology Publishing Company,1987.(in Chinese)
[3] 毛英泰.误差理论与精度分析[M].北京:国防工业出版社,1982.MAO Y T.The error theory and precision analysis[M].Beijing:National Defence Industry Press,1982.(in Chinese)
[4] 庞滔,郭大春.超精密加工技术[M].北京:国防工业出版社,2000.PANG T,GUO D CH.The ultraprecision machining technology[M].Beijing:National Defence Industry Press,2000.(in Chinese)
[5] 郑子文,李胜怡,袋一帆.丝杠径向跳动对超精密进给运动直线度的影响研究[J].光学精密工程,2001,9(6):107-110.ZHENG Z W,LI SH Y,DAI Y F.Research on deviations from the straight-line motion of ultra-precision machine due to run-out error of ball-screw[J].Optics and Precision Engineering,2001,9(6):107-110.(in Chinese)
[6] 徐宏,董吉洪.切断装盒机的设计[J].光学精密工程,2004,12(4):238-241.XU H,DONG J H.Design of magazine stocker[J].Optics and Precision Engineering,2004,12(4):238-241.(in Chinese)
[7] . 微电子封装技术的发展与展望[J]. 半导体技术, 2000, 5: 1-3.
董吉洪, 徐宏. 全自动金丝球焊机X-Y工作台的误差分析[J]. 光学 精密工程, 2005, 13(z1): 148. 董吉洪, 徐宏. Error analysis on the X-Y table in automatic gold wire bonder[J]. Optics and Precision Engineering, 2005, 13(z1): 148.
PDF全文
