反射率测量中的热辐射影响及其消除方法

金云声; 谭福利; 张永强; 李牧; 赵剑衡

doi:doi:10.3788/hplpb20112307.1767

强激光与粒子束, 2011, 23 (7): 1767, 网络出版: 2011-07-29

反射率测量中的热辐射影响及其消除方法

Effects and elimination method of the thermal radiation interference on the reflectivity measurement

论文大纲

金云声 ^*谭福利张永强李牧赵剑衡

作者单位

中国工程物理研究院流体物理研究所，四川绵阳 621900

强激光反射率热辐射积分球 high-power laser reflectivity heat emission integrating sphere

摘要

反射率测量过程中，被激光加热的材料发出热辐射光，对探测器测量存在明显干扰，给测量结果带来了较大误差，该现象普遍存在于以往的测试工作中。通过深入分析热辐射特性，在反射率测量装置中加入透过波长不同于加载激光波长的探测器，探测热辐射在该透过波长下的光强信号，并利用比对法消除了反射率测量过程中的热辐射干扰，使高温段的反射率测量精度得到较大提高。

Abstract

In the process of measuring the reflectivity, the thermal radiation, which is irradiated by laser and those temperature rise, brings obvious interference on the measurement, thus introducing a large error of the measurement. This phenomenon is common in the previous measurement work. The measurement accuracy on the reflectivity of the high temperature section can be greatly improved by the following procedure: a new detector whose transmitting wavelength is different from the loading laser’s wavelength is added first, and then the light strength signal of the thermal radiation at the laser loading section and the temperature dropping section after the laser stops is detected, at last the comparison method is applied to eliminate the thermal radiation interference in the process of reflectivity measurement．

参考文献

[1] 孙承纬, 陆启生, 范正修, 等. 激光辐照效应［M］. 北京: 国防工业出版社, 2002: 1-20. (Sun Chengwei, Lu Qisheng, Fan Zhengxiu, et al. Laser irradiation effects. Beijing: National Defence Industry Press, 2002: 1-20)

[2] William P L, Jorge E B. Laser effects research and modeling to support high energy laser system Proc［C］//Proc of SPIE. 2001:4376.

[3] 张永强, 王贵兵. 大气环境中不同温度下30CrMnSiA钢吸收率的点测量［J］. 激光技术, 2010, 34(4): 517-519.(Zhang Yongqiang, Wang Guibing. Point measurement of absorptivity of 30CrMnSiA steel at different temperature in atmosphere. Laser Technology, 2010, 34(4): 517-519)

[4] Zhang Z, Modest M F. Temperature-dependent Absorptances of ceramics for Nd: YAG and CO2 laser processing applications［J］. Heat Transfer, 1998, 120: 322-327.

[5] Bergstrom D, Powell J, Kaplan A F H. Aray-tracing analysis of the absorption of light by smooth and rough metal surfaces［J］. Journal of Applied Physics, 2007, 101(11): 1-11.

[6] Bergstrom D, Kaplan A F H, Powell J. Mathematical modelling of laser absorption mechanisms in metals［C］//Proceedings of the 16th Meeting on Mathematical Modelling of Materials Processing with Lasers . Austria Igls, 2003.

[7] Xie J, Kar A. Laser welding of thin sheet steel with surface oxidation［J］. Welding Research Supplement, 1999:343-348.

[8] 王贵兵. 连续激光与芳纶纤维树脂基体复合材料相互作用规律研究［D］. 绵阳: 中国工程物理研究院, 2002.(Wang Guibing. Research on interaction mechanism between CW laser and the composite reinforced by polyaryl amide fibers. Mianyang: China Academy of Engineering Physics, 2002）

金云声, 谭福利, 张永强, 李牧, 赵剑衡. 反射率测量中的热辐射影响及其消除方法[J]. 强激光与粒子束, 2011, 23(7): 1767. Jin Yunsheng, Tan Fuli, Zhang Yongqiang, Li Mu, Zhao Jianheng. Effects and elimination method of the thermal radiation interference on the reflectivity measurement[J]. High Power Laser and Particle Beams, 2011, 23(7): 1767.

反射率测量中的热辐射影响及其消除方法

关于本站 Cookie 的使用提示

全站搜索

反射率测量中的热辐射影响及其消除方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索