[1] 李念奎, 凌杲, 聂波, 等. 铝合金材料及其热处理技术[M]. 北京: 冶金工业出版社, 2012: 156- 158.

[2] Chen K H, Huang L P. Strengthening-toughening of 7xxx series high strength aluminum alloys by heat treatment[J]. Transactions of Nonferrous Metals Society of China, 2003, 13(3): 484-490.

[3] 林凯莉, 杨武雄, 吕俊霞, 等. 2198-T851铝锂合金激光焊接工艺研究[J]. 中国激光, 2014, 41(1): 0103007.

    Lin K L, Yang W X, Lü J X, et al. Laser beam welding study of 2198-T851 aluminum-lithium alloy[J]. Chinese Journal of Lasers, 2014, 41(1): 0103007.

[4] Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys[J]. Materials & Design, 2014, 56(4): 862-871.

[5] 谢水生, 刘静安, 黄国杰. 铝加工生产技术500问[M]. 北京: 化学工业出版社, 2006: 183- 188.

[6] 王鹏建, 乔及森, 张阳羊, 等. 喷射成形7055铝合金激光焊接头组织性能研究[J]. 稀有金属, 2017, 41(7): 733-738.

    Wang P J, Qiao J S, Zhang Y Y, et al. Development of microstructures and mechanical properties of laser welded joint for spray formed 7055 high strength aluminum alloy[J]. Chinese Journal of Rare Metals, 2017, 41(7): 733-738.

[7] Tran V X, Pan J, Pan T. Effects of processing time on strengths and failure modes of dissimilar spot friction welds between aluminum 5754-O and 7075-T6 sheets[J]. Journal of Materials Processing Technology, 2009, 209(8): 3724-3739.

[8] Kumar R, Dilthey U, Dwivedi D K, et al. Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA welding[J]. Materials & Design, 2009, 30(2): 306-313.

[9] 左玉婷, 王锋, 熊柏青, 等. 电子束焊喷射成形Al-Zn-Mg-Cu合金的组织性能研究[J]. 稀有金属, 2010, 34(4): 624-628.

    Zuo Y T, Wang F, Xiong B Q, et al. Microstructure and mechanical properties of spray formed Al-Zn-Mg-Cu alloy produced by electron-beam welding[J]. Chinese Journal of Rare Metals, 2010, 34(4): 624-628.

[10] 董皕喆, 杨武雄, 吴世凯, 等. 高强铝合金壁板结构T型接头辅助热源变形控制数值分析[J]. 中国激光, 2015, 42(8): 0803002.

    Dong B Z, Yang W X, Wu S K, et al. Numerical analysis on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy[J]. Chinese Journal of Lasers, 2015, 42(8): 0803002.

[11] 左铁钏. 高强铝合金的激光加工[M]. 北京: 国防工业出版社, 2008: 62- 65.

[12] 夏丰滨. 汽车用7000系铝合金激光焊接接头组织与性能研究[D]. 北京: 北京有色金属研究总院, 2013: 6- 10.

    Xia FB. Study on microstructures and properties of 7000 series aluminum alloy joints by laser beam welding[D]. Beijing: General Research Institute for Nonferrous Metals, 2013: 6- 10.

[13] 和岳, 武强, 邹江林, 等. 薄板铝合金光纤激光压焊坡口内材料的熔化行为[J]. 中国激光, 2017, 44(6): 0602008.

    He Y, Wu Q, Zou J L, et al. Melting behavior of materials in grooves during fiber laser pressure welding of thin-sheet aluminum alloy[J]. Chinese Journal of Lasers, 2017, 44(6): 0602008.

[14] 蔡华, 林凯莉, 肖荣诗. 薄板2524铝合金激光填丝焊接工艺及组织性能[J]. 焊接学报, 2014, 35(4): 24-28.

    Cai H, Lin K L, Xiao R S. Process and microstructure properties of laser beam welding of thin 2524 aluminum alloy sheet with filler wire[J]. Transactions of the China Welding Institution, 2014, 35(4): 24-28.

[15] 杨智华, 杨尚磊, 姜亦帅, 等. 7075高强铝合金激光填丝焊接组织与力学性能研究[J]. 材料导报, 2017, 31(6): 60-63.

    Yang Z H, Yang S L, Jiang Y S, et al. Microstructure and mechanical properties of laser welding joints of 7075 aluminum alloy with filler wire[J]. Materials Review, 2017, 31(6): 60-63.

[16] 周逸凡, 陈根余, 张焱, 等. 5A06铝合金光纤激光-MIG电弧复合焊接研究[J]. 应用激光, 2016, 36(2): 156-164.

    Zhou Y F, Chen G Y, Zhang Y, et al. Study on 5A06 aluminum alloy in fiber laser-MIG arc hybrid welding[J]. Applied Laser, 2016, 36(2): 156-164.

[17] Hong K M, Shin Y C. Prospects of laser welding technology in the automotive industry: A review[J]. Journal of Materials Processing Technology, 2017, 245: 46-69.

[18] 周万盛, 姚君山. 铝及铝合金的焊接[M]. 北京: 机械工业出版社, 2011: 32- 39.

[19] 韩剑. 7xxx系铝合金断裂性能与微合金化的研究[D]. 镇江: 江苏大学, 2009: 25- 31.

    HanJ. Research on rapture performance and microalloying effect of 7xxx-series aluminum alloy[D]. Zhenjiang: Jiangsu University, 2009: 25- 31.

[20] HullD. Fractography: Observing, measuring, and interpreting fracture surface topography[M]. London: Cambridge University Press, 1999: 177- 203.