[1] ZHOU N, AN Zh Y, LI Y H. Large-sized three-dimensional profile measurement technology based on laser radar［J］. Infrared and Laser Engineering, 2011, 40(12):2465-2468(in Chinese).

[2] HU Y Q, QIN L G, HUANG X. Mounted position calibration for airborne equipment with laser radar［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2010,42(1):112-116(in Chinese)．

[3] JHONSON S E, NICHOLS T L, GATT P, et al. Range precision of direct-detection laser radar system［J］. Proceedings of the SPIE, 2004, 5412:72-86.

[4] ZHENG Y Ch, ZHAO M J, ZHANG W P. Trend of laser radar technology development［J］. Infrared and Laser Engineering, 2006, 35(s1): 240-246(in Chinese)．

[5] MA L Q, WANG J H, CAO T Y, et al. Calibration for angular error of laser tracker by small displacement［J］. Acta Metrologica Sinica, 2009, 3(s1):76-78(in Chinese)．

[6] SHI K. The structure analysis and thermal analysis of laser radar［D］. Beijing: The Institute of Optics and Electronics the Chinese Academy, 2013:2-19(in Chinese).

[7] ZHOU W H. Research on the precision theory of large-scale coordinate measuring system［D］. Hefei: Hefei University of Technology, 2000:30-41(in Chinese).

[8] ZHOU W H, FEI Y T, LI B Y. The correction of geometric error for laser tracker［J］. Chinese Journal of Scientific Instrument, 2002, 23(1):56-63(in Chinese)．

[9] ZHANG L. Structure design of antenna pedestal and shaft system precision analysis［D］. Xi’an: Xidian University, 2012:15-21(in Chinese).

[10] AGUADO S, SAMPER D, SANTOLARIA J, et al. Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements［J］. International Journal of Machine Tools & Manufacture, 2012, 53(1):160-169.

[11] QU H T, REN W J, LU D. Modelling errors of precised two shafts swivelling stand and its analysis［J］. Computer Application and Software, 2010, 27(9):160-162(in Chinese).

[12] GUO Y K, LI Y H, LI Q X. Measurement uncertainty of perpendicularity of two axes of servo turntable［C］//Department of Precision Instrument and Mechanology of Tsinghua University,3rd International Symposium on Instrumentation Science and Technology. Beijing: Department of Precision Instrument and Mechanology of Tsinghua University, 2004:441-444(in Chinese).

[13] OU J M, WANG R L, SHANG H C, et al. Three forms of expression about reflection law［J］. Journal of Yunnan Normal University, 2000, 20(1):57-61(in Chinese).

[14] LIU W L, WANG Zh K, QU X H. Error analysis of tracking mirror for laser tracker system［J］. Optics and Precision Engineering, 2008, 16(4):585-590(in Chinese).

[15] DOUGLAS P, NAGARAJAH C R, IOVENITTI P. Design and error analysis of a surface reflector for a laser tracking measurement system［J］.Journal of the International Measurement Confederation, 1999, 6(8):167-178.